freebsd-arm@FreeBSD.org
Porting FreeBSD to ARM processors
- Go to: [ monthly archives ] [ by author ] [ by thread ]
June 2025 Archives by date
- Sun, 01 Jun 2025
- Re: Exec format error from armv7 snapshot on RPi2 Mark Millard
- Problem reports for freebsd-arm@FreeBSD.org that need special attention bugzilla-noreply_at_FreeBSD.org
- Re: Exec format error from armv7 snapshot on RPi2 bob prohaska
- Re: Exec format error from armv7 snapshot on RPi2 Mark Millard
- Mon, 02 Jun 2025
- Re: Exec format error from armv7 snapshot on RPi2 bob prohaska
- Installworld: rescue/sh check failed, core dumped bob prohaska
- Re: Installworld: rescue/sh check failed, core dumped Mark Millard
- Tue, 03 Jun 2025
- Wed, 04 Jun 2025
- RPI 4/5 u-boot new port, is there any interest? Klaus_Küchemann
- Re: RPI 4/5 u-boot new port, is there any interest? Ronald Klop
- Re: RPI 4/5 u-boot new port, is there any interest? Klaus_Küchemann
- Re: RPI 4/5 u-boot new port, is there any interest? Johan Helsingius
- Re: RPI 4/5 u-boot new port, is there any interest? Patrick M. Hausen
- Re: RPI 4/5 u-boot new port, is there any interest? Warner Losh
- Re: RPI 4/5 u-boot new port, is there any interest? Mark Millard
- Re: RPI 4/5 u-boot new port, is there any interest? Patrick M. Hausen
- Re: RPI 4/5 u-boot new port, is there any interest? Klaus_Küchemann
- Re: RPI 4/5 u-boot new port, is there any interest? Mark Millard
- Re: RPI 4/5 u-boot new port, is there any interest? Warner Losh
- Re: RPI 4/5 u-boot new port, is there any interest? Mark Millard
- Re: RPI 4/5 u-boot new port, is there any interest? Warner Losh
- Re: RPI 4/5 u-boot new port, is there any interest? Mark Millard
- Re: RPI 4/5 u-boot new port, is there any interest? Warner Losh
- Re: RPI 4/5 u-boot new port, is there any interest? Klaus_Küchemann
- Re: RPI 4/5 u-boot new port, is there any interest? Mark Millard
- Re: RPI 4/5 u-boot new port, is there any interest? Klaus_Küchemann
- Re: RPI 4/5 u-boot new port, is there any interest? bob prohaska
- Re: RPI 4/5 u-boot new port, is there any interest? Paul Floyd
- Re: RPI 4/5 u-boot new port, is there any interest? Paul Floyd
- Re: RPI 4/5 u-boot new port, is there any interest? Klaus_Küchemann
- Re: RPI 4/5 u-boot new port, is there any interest? Evgenii Ivanov
- Re: RPI 4/5 u-boot new port, is there any interest? Klaus_Küchemann
- Re: RPI 4/5 u-boot new port, is there any interest? Bjoern A. Zeeb
- Re: RPI 4/5 u-boot new port, is there any interest? bob prohaska
- Re: RPI 4/5 u-boot new port, is there any interest? Klaus_Küchemann
- Thu, 05 Jun 2025
- Fri, 06 Jun 2025
- Re: RPI 4/5 u-boot new port, is there any interest? [16 GiByte RPi5B (D0) basics operational via the EDK2 variant for such] Mark Millard
- Re: RPI 4/5 u-boot new port, is there any interest? [16 GiByte RPi5B (D0) basics operational via the EDK2 variant for such] Mark Millard
- Re: RPI 4/5 u-boot new port, is there any interest? [16 GiByte RPi5B (D0) basics operational via the EDK2 variant for such, NMVe booting too] Mark Millard
- Re: RPI 4/5 u-boot new port, is there any interest? [16 GiByte RPi5B (D0) basics operational via the EDK2 variant for such, NMVe booting too] Bjoern A. Zeeb
- Re: RPI 4/5 u-boot new port, is there any interest? [16 GiByte RPi5B (D0) basics operational via the EDK2 variant for such, NMVe booting too] Mark Millard
- Sat, 07 Jun 2025
- Any ideas how/when this got broken -- and how I unbreak it? Karl Denninger
- Re: Any ideas how/when this got broken -- and how I unbreak it? Karl Denninger
- Sun, 08 Jun 2025
- Loading splash ok -> <reset>, how to debug? Bjoern A. Zeeb
- Re: Loading splash ok -> <reset>, how to debug? Tomek CEDRO
- Re: Loading splash ok -> <reset>, how to debug? Warner Losh
- Re: Loading splash ok -> <reset>, how to debug? Klaus_Küchemann
- Re: Loading splash ok -> <reset>, how to debug? Bjoern A. Zeeb
- Re: Loading splash ok -> <reset>, how to debug? Warner Losh
- Re: Loading splash ok -> <reset>, how to debug? Adrian Chadd
- Problem reports for freebsd-arm@FreeBSD.org that need special attention bugzilla-noreply_at_FreeBSD.org
- Mon, 09 Jun 2025
- Re: Loading splash ok -> <reset>, how to debug? Bjoern A. Zeeb
- Re: Loading splash ok -> <reset>, how to debug? Bjoern A. Zeeb
- Re: Loading splash ok -> <reset>, how to debug? Mark Millard
- Re: Loading splash ok -> <reset>, how to debug? Bjoern A. Zeeb
- Re: Loading splash ok -> <reset>, how to debug? Warner Losh
- Re: Loading splash ok -> <reset>, how to debug? Warner Losh
- Re: Loading splash ok -> <reset>, how to debug? Mark Millard
- Re: Loading splash ok -> <reset>, how to debug? Warner Losh
- Re: Loading splash ok -> <reset>, how to debug? Bjoern A. Zeeb
- Re: Loading splash ok -> <reset>, how to debug? Bjoern A. Zeeb
- Re: Loading splash ok -> <reset>, how to debug? Warner Losh
- Re: Loading splash ok -> <reset>, how to debug? Bjoern A. Zeeb
- Tue, 10 Jun 2025
- Wed, 11 Jun 2025
- Re: Loading splash ok -> <reset>, how to debug? Bjoern A. Zeeb
- Re: Loading splash ok -> <reset>, how to debug? Warner Losh
- Very long-running buildworld process bob prohaska
- Re: Very long-running buildworld process Mark Millard
- Re: Very long-running buildworld process bob prohaska
- Some RPi5B "D0" status . . . Mark Millard
- Thu, 12 Jun 2025
- Re: Very long-running buildworld process Mark Millard
- Re: Very long-running buildworld process bob prohaska
- How to activate HDMI output with FreeBSD running on a CM3+? Patrick M. Hausen
- Re: How to activate HDMI output with FreeBSD running on a CM3+? Karl Denninger
- Re: Very long-running buildworld process Mark Millard
- Re: How to activate HDMI output with FreeBSD running on a CM3+? Patrick M. Hausen
- Re: How to activate HDMI output with FreeBSD running on a CM3+? Patrick M. Hausen
- Re: Very long-running buildworld process bob prohaska
- Re: Very long-running buildworld process Mark Millard
- Fri, 13 Jun 2025
- Re: Very long-running buildworld process bob prohaska
- Re: Very long-running buildworld process Mark Millard
- Sat, 14 Jun 2025
- Re: Very long-running buildworld process bob prohaska
- Sun, 15 Jun 2025
- Re: What abouth the panfrost "driver" installed on the Radxa Zero 3W (Rockchip RK3566) Mario Marietto
- Problem reports for freebsd-arm@FreeBSD.org that need special attention bugzilla-noreply_at_FreeBSD.org
- usr.bin/dtc sync with upstream (https://reviews.freebsd.org/D42438) Stanislav Silnicki
- Mon, 16 Jun 2025
- Fri, 20 Jun 2025
- Sat, 21 Jun 2025
- Re: WARNING: Unimplemented Standard Service Call: Mark Millard
- Re: WARNING: Unimplemented Standard Service Call: Bjoern A. Zeeb
- Re: WARNING: Unimplemented Standard Service Call: Mark Millard
- Re: WARNING: Unimplemented Standard Service Call: Rebecca Cran
- Re: WARNING: Unimplemented Standard Service Call: Bjoern A. Zeeb
- Re: WARNING: Unimplemented Standard Service Call: Mark Millard
- Sun, 22 Jun 2025
- Problem reports for freebsd-arm@FreeBSD.org that need special attention bugzilla-noreply_at_FreeBSD.org
- Mon, 23 Jun 2025
- Re: WARNING: Unimplemented Standard Service Call: Andrew Turner
- Tue, 24 Jun 2025
- Zynq 7 drivers source code location Michał_Kruszewski
- Re: Zynq 7 drivers source code location Milan Obuch
- Re: Zynq 7 drivers source code location Tomek CEDRO
- Re: WARNING: Unimplemented Standard Service Call: Bjoern A. Zeeb
- Wed, 25 Jun 2025
- Fri, 27 Jun 2025
- Panfrost GPU titus
- Sat, 28 Jun 2025
- Re: Panfrost GPU Jesper Schmitz Mouridsen
- Re: Panfrost GPU Mario Marietto
- Sun, 29 Jun 2025
- Problem reports for freebsd-arm@FreeBSD.org that need special attention bugzilla-noreply_at_FreeBSD.org
- Mon, 30 Jun 2025
- Re: Panfrost GPU titus
- Re: Panfrost GPU titus
- Solid-Run Honeycomb LX2K FreeBSD Install 14.3-STABLE or 15.0-CURRENT, What is your written documented method for installation? Fred Finster
- Re: Solid-Run Honeycomb LX2K FreeBSD Install 14.3-STABLE or 15.0-CURRENT, What is your written documented method for installation? Dmitry Salychev
- Re: Solid-Run Honeycomb LX2K FreeBSD Install 14.3-STABLE or 15.0-CURRENT, What is your written documented method for installation? Mark Millard
- Go to: [ monthly archives ] [ by author ] [ by date ]