Freebsd 7.2-RC boot problem

[subbsd]

On Monday 27 April 2009 21:31:38 Jim Pingle wrote:
> subbsd wrote:
> > Hello, i've got some problem with my SATA Optiarc DVD RW:
> > message output on the screen in not stopped, but repeating with
> > incremental delay:
> > ...
> > acd0: DVDR <Optiarc DVD RW AD-7200S/1.06> at ata3-master UDMA33
> > HEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install
>

Hi. 

> Did you retype this? Or did it really say "HEOM"? If that's not a typo,
> you may want to check for RAM errors.
>

Correct. RAM is ok, problem in my fingers ;).

> > run_interrupt_driven hooks: still waiting after 60 seconds for xpt_config
> > run_interrupt_driven hooks: still waiting after 120 seconds for
> > xpt_config run_interrupt_driven hooks: still waiting after 180 seconds
> > for xpt_config run_interrupt_driven hooks: still waiting after 240
> > seconds for xpt_config run_interrupt_driven hooks: still waiting after
> > 300 seconds for xpt_config
>
> I spoke with someone the other day who had that exact same message, and
> it was due to either a Firewire controller in the BIOS, or a USB card
> reader. They disabled both at the same time, and the message went away.
>

Yes, really when  IE1394 is disabled in bios problem is gone. Thanks! May be 
this info make sense for publish in RelNotes?


> That appears to be the CAM subsystem probing for root-capable devices,
> from what I found via Google the other day.
>
> Jim