SATA Failure Introduced between 6.0 and 6.1-RC1

Mon May 8 07:22:40 UTC 2006

Just a follow up.

-RC2 did not resolve this problem, nor did 6.1-STABLE (as of around 8hrs 
ago).

I am eager to work with the community in resolving these issues.

I have applied the patches described at:

http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/nve/if_nve.c.diff?r1=1.18&r2=1.19&f=h
and
http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/nve/if_nvereg.h.diff?r1=1.6&r2=1.7&f=h

in order to get the Onboard ethernet to work. These problems exist even 
without applying that patch however.

Below is a dmesg and uname of an affected machine:

Cheers
J

[jared at aoi ~]$ dmesg
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD 6.1-STABLE #1: Mon May  8 11:49:24 EST 2006
     root at aoi:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3700+ (2210.07-MHz K8-class CPU)
   Origin = "AuthenticAMD"  Id = 0x30f72  Stepping = 2

Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
   Features2=0x1<SSE3>
   AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
   AMD Features2=0x1<LAHF>
real memory  = 1056702464 (1007 MB)
avail memory = 1008156672 (961 MB)
kbd1 at kbdmux0
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci0: <display, VGA> at device 5.0 (no driver attached)
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfebde000-0xfebdefff irq 5 
at device 11.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebdfc00-0xfebdfcff irq 
7 at device 11.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 8 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
atapci0: <nVidia nForce MCP51 UDMA133 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 13.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP51 SATA300 controller> port 
0xe800-0xe807,0xe480-0xe483,0xe400-0xe407,0xe080-0xe083,0xe000-0xe00f 
mem 0xfebdd000-0xfebddfff irq 11 at device 14.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce MCP51 SATA300 controller> port 
0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f 
mem 0xfebdc000-0xfebdcfff irq 10 at device 15.0 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib4: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci4: <ACPI PCI bus> on pcib4
nve0: <NVIDIA nForce MCP13 Networking Adapter> port 0xd080-0xd087 mem 
0xfebdb000-0xfebdbfff irq 7 at device 20.0 on pci0
nve0: Ethernet address 00:15:f2:5e:58:09
miibus0: <MII bus> on nve0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
nve0: Ethernet address: 00:15:f2:5e:58:09
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 
on acpi0
fdc0: [FAST]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen0: Powerware Powerware UPS, rev 0.20/0.50, addr 2
Timecounter "TSC" frequency 2210072188 Hz quality 800
Timecounters tick every 1.000 msec
module_register_init: MOD_LOAD (amr_linux, 0xffffffff806205d0, 0) error 6
ad0: 152627MB <WDC WD1600SB-01KBC0 08.02D08> at ata0-master UDMA100
ad1: 152627MB <WDC WD1600SB-01KBC0 08.02D08> at ata0-slave UDMA100
ad4: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata2-master SATA300
GEOM_MIRROR: Device gm0 created (id=124972809).
GEOM_MIRROR: Device gm0: provider ad0 detected.
GEOM_MIRROR: Device gm0: provider ad1 detected.
GEOM_MIRROR: Device gm0: provider ad1 activated.
GEOM_MIRROR: Device gm0: provider ad0 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
ad8: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata4-master SATA300
Trying to mount root from ufs:/dev/mirror/gm0s1a
nve0: device timeout (1)
nve0: link state changed to DOWN
nve0: link state changed to UP

[jared at aoi ~]$ uname -a
FreeBSD aoi 6.1-STABLE FreeBSD 6.1-STABLE #1: Mon May  8 11:49:24 EST 
2006     root at aoi:/usr/obj/usr/src/sys/GENERIC  amd64

Jared wrote:
> Hi -stable!
> 
> I'd like to bring something to the attention of -stable that was posted 
> to -amd64 but has not yet being resolved:
> 
> http://www.freebsd.org/cgi/query-pr.cgi?pr=amd64/95554
> 
> I'm unable to test to see if this occurs on i386 aswell so am unsure if 
> this is the right list to post to. But it appears to me that it would be 
> something that should be addressed prior to 6.1-RELEASE.
> 
> I am experiencing the same problem as described in the original PR, but 
> with Western Digital hard drives and the latest  BIOS version (1001) 
> which is known to fix the ACPI DSDT bugs that have plagued these boards.
> 
> I have not liased with the mailling lists before if you need any more 
> information please ask and I'll supply what I can as best I can. But the 
> original PR is well written.
> 
> I will also see if RC-2 resolves this when cvsup has RC2 and I can build 
> an RC2 world/kernel.
> 
> Cheers
> and Thanks for a great operating system
> 
> Jared
> 
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"