freebsd-arm@FreeBSD.org
Porting FreeBSD to ARM processors
- Go to: [ monthly archives ] [ by author ] [ by thread ]
November 2025 Archives by date
- Sat, 01 Nov 2025
- Re: FYI: main-arm64 port-packages built per Hr. on ampere2, some history and comparisons/contrasts Mark Millard
- Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o bob prohaska
- Re: Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o Adrian Chadd
- Re: Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o Mark Millard
- Re: Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o Adrian Chadd
- Re: Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o Mark Millard
- Re: Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o Adrian Chadd
- Re: Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o Mark Millard
- Re: Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o Konstantin Belousov
- Re: Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o Mark Millard
- Re: Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o Mark Millard
- Re: Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o bob prohaska
- Sun, 02 Nov 2025
- rk356x sound titus
- I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... Mario Marietto
- Problem reports for freebsd-arm@FreeBSD.org that need special attention bugzilla-noreply_at_FreeBSD.org
- Re: Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o bob prohaska
- Mon, 03 Nov 2025
- [Bug 245160] allow selection of am335x rtc external / internal clock source bugzilla-noreply_at_freebsd.org
- Tue, 04 Nov 2025
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... Adrian Chadd
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... Warner Losh
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... Mark Millard
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... Warner Losh
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... Mark Millard
- Wed, 05 Nov 2025
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... Adrian Chadd
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... Warner Losh
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... Mario Marietto
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... Adrian Chadd
- acpica-tools-20250807 fails to build for armv7: error: format specifies type 'unsigned long' but the argument has type 'UINT64' (aka 'unsigned long long') Mark Millard
- Re: acpica-tools-20250807 fails to build for armv7: error: format specifies type 'unsigned long' but the argument has type 'UINT64' (aka 'unsigned long long') Robert Clausecker
- libunwind-20250904 fails to build for armv7: error: implement UNW_ARM_FRAME_SIGRETURN on FreeBSD Mark Millard
- Re: acpica-tools-20250807 fails to build for armv7: error: format specifies type 'unsigned long' but the argument has type 'UINT64' (aka 'unsigned long long') Mark Millard
- Re: libunwind-20250904 fails to build for armv7: error: implement UNW_ARM_FRAME_SIGRETURN on FreeBSD Mark Millard
- fuz@ : do you want bugzilla-submitals for armv7 port-package build problems generally? Mark Millard
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... Mark Millard
- Thu, 06 Nov 2025
- Arm v7 RPi2 -current unresponsive to debugger escape during buildworld bob prohaska
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld Ronald Klop
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld bob prohaska
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld Mark Millard
- Fri, 07 Nov 2025
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld bob prohaska
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld Mark Millard
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld Paul Mather
- mongodb - Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld Ronald Klop
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld bob prohaska
- Re: mongodb - Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld Paul Mather
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld Mark Millard
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld bob prohaska
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld Mark Millard
- Re: mongodb - Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld John Kennedy
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld Ronald Klop
- Re: mongodb - Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld Mark Millard
- Sun, 09 Nov 2025
- Mon, 10 Nov 2025
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld void
- [Bug 290411] lib32: __syscall() not supported bugzilla-noreply_at_freebsd.org
- official ruby33's rdoc build failed for main-arm64-default: ld-elf.so.1: /usr/local/lib/libunwind.so.8: Undefined symbol "__aarch64_ldadd4_acq_rel" Mark Millard
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld bob prohaska
- Re: official ruby33's rdoc build failed for main-arm64-default: ld-elf.so.1: /usr/local/lib/libunwind.so.8: Undefined symbol "__aarch64_ldadd4_acq_rel" Mark Millard
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld void
- kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount void
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount void
- Tue, 11 Nov 2025
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount Mark Millard
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount bob prohaska
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld bob prohaska
- [Bug 290951] on brand new armv7 image kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount (493248 pages)." bugzilla-noreply_at_freebsd.org
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount void
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount Ronald Klop
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount Dag-Erling_Smørgrav
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount bob prohaska
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount bob prohaska
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... Andrew Turner
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount Dag-Erling_Smørgrav
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount void
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount Mark Millard
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount Mark Millard
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount bob prohaska
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount bob prohaska
- main [so: 16] armv7 chroot and lib32 use: example fio command works on real armv7 system boots but fails on aarch64 chroot or lib32 use Mark Millard
- [Bug 290962] armv7 chroot and lib32 use on aarch64: example fio command works on real armv7 system boots but fails for aarch64-to-armv7 chroot or lib32 use bugzilla-noreply_at_freebsd.org
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount Mark Millard
- Wed, 12 Nov 2025
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount void
- was: configured swap now: relative rpi2+ ufs2 nfs random rw speeds void
- FreeBSD on Zynq (Cortex-A9), new Phy for cgem0? Shiro
- Re: FreeBSD on Zynq (Cortex-A9), new Phy for cgem0? Milan Obuch
- Re: was: configured swap now: relative rpi2+ ufs2 nfs random rw speeds bob prohaska
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld bob prohaska
- Re: was: configured swap now: relative rpi2+ ufs2 nfs random rw speeds void
- Thu, 13 Nov 2025
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... Mario Marietto
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld Ronald Klop
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld Warner Losh
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld Ronald Klop
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld Michal Meloun
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld bob prohaska
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld Mark Millard
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... Mark Millard
- Re: FreeBSD on Zynq (Cortex-A9), new Phy for cgem0? Shiro
- Re: FreeBSD on Zynq (Cortex-A9), new Phy for cgem0? Milan Obuch
- native armv7 for struct aiocb offsets and overall size vs. aarch64 for struct aiocb32 offsets and overall size: most fields do not match Mark Millard
- Fri, 14 Nov 2025
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld bob prohaska
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld Herbert J. Skuhra
- openjdk11 compile fail on armv7 - (Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld) Ronald Klop
- Re: openjdk11 compile fail on armv7 - (Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld) Mark Millard
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld bob prohaska
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld bob prohaska
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld Mark Millard
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld bob prohaska
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld Mark Millard
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld Mark Millard
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld Mark Millard
- RETITLED: On aarch64 in a armv7 chroot, I've reproduced the armv7: jemalloc/internal/ehooks.h:170: Failed assertion: "p[i] == 0" Mark Millard
- Sat, 15 Nov 2025
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld Herbert J. Skuhra
- Re: D43399 FreeBSD Review, enable VCHIQ HDMI Audio subsystem for BCM2711 Raspberry Pi 4B, 400 adding 3 patch files. Adrian Chadd
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld bob prohaska
- Re: RETITLED: On aarch64 in a armv7 chroot, I've reproduced the armv7: jemalloc/internal/ehooks.h:170: Failed assertion: "p[i] == 0" [adding: small memory aarch64 behavior] Mark Millard
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld Warner Losh
- Sun, 16 Nov 2025
- Re: D43399 FreeBSD Review, enable VCHIQ HDMI Audio subsystem for BCM2711 Raspberry Pi 4B, 400 adding 3 patch files. Nuno Teixeira
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld bob prohaska
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld Warner Losh
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld Michal Meloun
- Mon, 17 Nov 2025
- WITHOUT_CLEAN confusion in -current void
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld Konstantin Belousov
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld Mark Millard
- Re: WITHOUT_CLEAN confusion in -current Herbert J. Skuhra
- RE: WITHOUT_CLEAN confusion in -current Mark Millard
- Re: WITHOUT_CLEAN confusion in -current Warner Losh
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld Mark Millard
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld Mark Millard
- Re: WITHOUT_CLEAN confusion in -current void
- [Bug 246865] c++: error: unable to execute command: Killed bugzilla-noreply_at_freebsd.org
- FYI: linux 6.18 arm64 update: Use load LSE atomics for the non-return per-CPU atomic operations Mark Millard
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [only main 16 does the check] Mark Millard
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld bob prohaska
- FYI: RPi5 power consumption reply [Not on topic for original "Future of armv7" message] Mark Millard
- Re: FYI: RPi5 power consumption reply [Not on topic for original "Future of armv7" message] Tomek CEDRO
- Tue, 18 Nov 2025
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld Adrian Chadd
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld Mark Millard
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld void
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [gdb backtrace!] Mark Millard
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [gdb backtrace! End of area has 0x5a5a5a5a sequence] Mark Millard
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [gdb backtrace! End of area has 0x5a5a5a5a sequence] Mark Millard
- [Bug 269726] kern.msgbufsize=4587520 in loader.conf, kernel never boots bugzilla-noreply_at_freebsd.org
- Wed, 19 Nov 2025
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [Notes from another example core dump: #1] Mark Millard
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [Notes from another example core dump: #1] Mark Millard
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [Notes from another example core dump: #1] Mark Millard
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [Notes from another example core dump: #2] Mark Millard
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [Notes from another example core dump: #3] Mark Millard
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [Notes from another example core dump: #4] [New common range #0..#10 __je_pa_alloc] Mark Millard
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [Notes from another example core dump: #5] [Common range #0..#10 __je_pa_alloc] Mark Millard
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [Notes from another example core dump: #5] [Common range #0..#10 __je_pa_alloc] Mark Millard
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [Notes from another example core dump: #5] [Common range #0..#10 __je_pa_alloc] Mark Millard
- Thu, 20 Nov 2025
- eqos on Panther X2 RK3566 qroxana
- Re: eqos on Panther X2 RK3566 Milan Obuch
- Re: eqos on Panther X2 RK3566 qroxana
- Re: eqos on Panther X2 RK3566 Milan Obuch
- Re: eqos on Panther X2 RK3566 Søren_Schmidt
- Re: Still seeing Failed assertion: "p[i] == 0" [ *** i386 chroot on amd64 can get the failure on main 16 too *** ] Mark Millard
- Fri, 21 Nov 2025
- Re: Still seeing Failed assertion: "p[i] == 0" [ *** i386 chroot on amd64 can get the failure on main 16 too *** ] Mark Millard
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld bob prohaska
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld Mark Millard
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld bob prohaska
- Re: Still seeing Failed assertion: "p[i] == 0" [ *** i386 chroot on amd64 can get the failure on main 16 too *** ] Mark Millard
- Re: Still seeing Failed assertion: "p[i] == 0" [ *** i386 chroot on amd64 can get the failure on main 16 too *** ] [failed without new kernel check detection] Mark Millard
- Re: Still seeing Failed assertion: "p[i] == 0" [ *** i386 chroot on amd64 can get the failure on main 16 too *** ] [failed without new kernel check detection] Mark Millard
- Sat, 22 Nov 2025
- Sun, 23 Nov 2025
- wlan0 goes down but system doesn't notice bob prohaska
- Re: wlan0 goes down but system doesn't notice Adrian Chadd
- Re: bug in sys/dev/[extres]/nvmem/nvmem.c Emmanuel Vadot
- Re: bug in sys/dev/[extres]/nvmem/nvmem.c titus
- Re: bug in sys/dev/[extres]/nvmem/nvmem.c titus
- Re: wlan0 goes down but system doesn't notice bob prohaska
- Re: wlan0 goes down but system doesn't notice Adrian Chadd
- Mon, 24 Nov 2025
- Tue, 25 Nov 2025
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld bob prohaska
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld Mark Millard
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld bob prohaska
- allwinner gpio bank offset Titus Manea
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld bob prohaska
- arm gicv3 its command time out / patch titus
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld Mark Millard
- Wed, 26 Nov 2025
- Re: arm gicv3 its command time out / patch Warner Losh
- Re: arm gicv3 its command time out / patch Warner Losh
- Re: arm gicv3 its command time out / patch Michal Meloun
- Re: arm gicv3 its command time out / patch Warner Losh
- Re: arm gicv3 its command time out / patch Titus Manea
- Re: arm gicv3 its command time out / patch Warner Losh
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld bob prohaska
- Go to: [ monthly archives ] [ by author ] [ by date ]