freebsd-arm@FreeBSD.org
Porting FreeBSD to ARM processors
November 2025 Archives by author
- Adrian Chadd
- Re: Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o (Sat, 01 Nov 2025 15:57:13 UTC)
- Re: Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o (Sat, 01 Nov 2025 16:36:30 UTC)
- Re: Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o (Sat, 01 Nov 2025 17:22:37 UTC)
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... (Tue, 04 Nov 2025 19:05:48 UTC)
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... (Wed, 05 Nov 2025 07:28:52 UTC)
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... (Wed, 05 Nov 2025 15:02:37 UTC)
- Re: D43399 FreeBSD Review, enable VCHIQ HDMI Audio subsystem for BCM2711 Raspberry Pi 4B, 400 adding 3 patch files. (Sat, 15 Nov 2025 15:47:21 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Tue, 18 Nov 2025 03:53:15 UTC)
- Re: bug in sys/dev/[extres]/nvmem/nvmem.c (Sat, 22 Nov 2025 22:30:34 UTC)
- Re: wlan0 goes down but system doesn't notice (Sun, 23 Nov 2025 04:14:49 UTC)
- Re: wlan0 goes down but system doesn't notice (Sun, 23 Nov 2025 15:44:51 UTC)
- Andrew Turner
- bob prohaska
- Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o (Sat, 01 Nov 2025 15:18:29 UTC)
- Re: Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o (Sat, 01 Nov 2025 19:07:44 UTC)
- Re: Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o (Sun, 02 Nov 2025 23:47:04 UTC)
- Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Thu, 06 Nov 2025 14:04:52 UTC)
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Thu, 06 Nov 2025 16:38:28 UTC)
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Fri, 07 Nov 2025 02:22:37 UTC)
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Fri, 07 Nov 2025 16:16:47 UTC)
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Fri, 07 Nov 2025 16:49:05 UTC)
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Mon, 10 Nov 2025 15:39:51 UTC)
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount (Tue, 11 Nov 2025 01:40:49 UTC)
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Tue, 11 Nov 2025 01:46:54 UTC)
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount (Tue, 11 Nov 2025 16:30:54 UTC)
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount (Tue, 11 Nov 2025 16:46:47 UTC)
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount (Tue, 11 Nov 2025 18:53:55 UTC)
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount (Tue, 11 Nov 2025 19:03:31 UTC)
- Re: was: configured swap now: relative rpi2+ ufs2 nfs random rw speeds (Wed, 12 Nov 2025 21:58:26 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Wed, 12 Nov 2025 22:25:02 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Thu, 13 Nov 2025 14:41:49 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Fri, 14 Nov 2025 03:44:55 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Fri, 14 Nov 2025 15:25:27 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Fri, 14 Nov 2025 15:45:45 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Fri, 14 Nov 2025 19:25:54 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Sat, 15 Nov 2025 21:34:52 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Sun, 16 Nov 2025 15:43:54 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Mon, 17 Nov 2025 15:38:09 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Fri, 21 Nov 2025 03:34:28 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Fri, 21 Nov 2025 14:55:40 UTC)
- wlan0 goes down but system doesn't notice (Sun, 23 Nov 2025 02:18:43 UTC)
- Re: wlan0 goes down but system doesn't notice (Sun, 23 Nov 2025 15:15:24 UTC)
- Re: wlan0 goes down but system doesn't notice (Mon, 24 Nov 2025 15:19:28 UTC)
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Tue, 25 Nov 2025 02:07:26 UTC)
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Tue, 25 Nov 2025 03:56:56 UTC)
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Tue, 25 Nov 2025 15:48:01 UTC)
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Wed, 26 Nov 2025 18:06:27 UTC)
- bugzilla-noreply_at_FreeBSD.org
- bugzilla-noreply_at_freebsd.org
- bugzilla-noreply_at_FreeBSD.org
- bugzilla-noreply_at_freebsd.org
- Dag-Erling_Smørgrav
- Emmanuel Vadot
- Herbert J. Skuhra
- John Kennedy
- Konstantin Belousov
- Mario Marietto
- Mark Millard
- Re: FYI: main-arm64 port-packages built per Hr. on ampere2, some history and comparisons/contrasts (Sat, 01 Nov 2025 02:18:19 UTC)
- Re: Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o (Sat, 01 Nov 2025 16:05:09 UTC)
- Re: Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o (Sat, 01 Nov 2025 16:36:41 UTC)
- Re: Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o (Sat, 01 Nov 2025 17:45:18 UTC)
- Re: Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o (Sat, 01 Nov 2025 18:26:37 UTC)
- Re: Buildkernel fails in /usr/obj/usr/src/arm.armv7/sys/GENERIC/vchiq_shim.o (Sat, 01 Nov 2025 18:59:10 UTC)
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... (Tue, 04 Nov 2025 19:16:45 UTC)
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... (Tue, 04 Nov 2025 21:37:35 UTC)
- acpica-tools-20250807 fails to build for armv7: error: format specifies type 'unsigned long' but the argument has type 'UINT64' (aka 'unsigned long long') (Wed, 05 Nov 2025 15:10:36 UTC)
- libunwind-20250904 fails to build for armv7: error: implement UNW_ARM_FRAME_SIGRETURN on FreeBSD (Wed, 05 Nov 2025 15:35:45 UTC)
- Re: acpica-tools-20250807 fails to build for armv7: error: format specifies type 'unsigned long' but the argument has type 'UINT64' (aka 'unsigned long long') (Wed, 05 Nov 2025 15:41:37 UTC)
- Re: libunwind-20250904 fails to build for armv7: error: implement UNW_ARM_FRAME_SIGRETURN on FreeBSD (Wed, 05 Nov 2025 15:48:24 UTC)
- fuz@ : do you want bugzilla-submitals for armv7 port-package build problems generally? (Wed, 05 Nov 2025 16:10:45 UTC)
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... (Wed, 05 Nov 2025 21:19:58 UTC)
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Thu, 06 Nov 2025 18:00:19 UTC)
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Fri, 07 Nov 2025 04:15:49 UTC)
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Fri, 07 Nov 2025 16:41:13 UTC)
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Fri, 07 Nov 2025 17:02:43 UTC)
- Re: mongodb - Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Fri, 07 Nov 2025 18:14:20 UTC)
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... (Sun, 09 Nov 2025 22:30:21 UTC)
- official ruby33's rdoc build failed for main-arm64-default: ld-elf.so.1: /usr/local/lib/libunwind.so.8: Undefined symbol "__aarch64_ldadd4_acq_rel" (Mon, 10 Nov 2025 15:14:14 UTC)
- Re: official ruby33's rdoc build failed for main-arm64-default: ld-elf.so.1: /usr/local/lib/libunwind.so.8: Undefined symbol "__aarch64_ldadd4_acq_rel" (Mon, 10 Nov 2025 16:50:15 UTC)
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount (Tue, 11 Nov 2025 00:27:05 UTC)
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount (Tue, 11 Nov 2025 17:22:45 UTC)
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount (Tue, 11 Nov 2025 18:24:47 UTC)
- main [so: 16] armv7 chroot and lib32 use: example fio command works on real armv7 system boots but fails on aarch64 chroot or lib32 use (Tue, 11 Nov 2025 22:09:23 UTC)
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount (Tue, 11 Nov 2025 22:30:35 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Thu, 13 Nov 2025 15:28:21 UTC)
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... (Thu, 13 Nov 2025 15:46:15 UTC)
- native armv7 for struct aiocb offsets and overall size vs. aarch64 for struct aiocb32 offsets and overall size: most fields do not match (Thu, 13 Nov 2025 22:01:37 UTC)
- Re: openjdk11 compile fail on armv7 - (Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld) (Fri, 14 Nov 2025 13:15:52 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Fri, 14 Nov 2025 17:16:57 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Fri, 14 Nov 2025 20:14:57 UTC)
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Fri, 14 Nov 2025 21:57:44 UTC)
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Fri, 14 Nov 2025 22:04:44 UTC)
- RETITLED: On aarch64 in a armv7 chroot, I've reproduced the armv7: jemalloc/internal/ehooks.h:170: Failed assertion: "p[i] == 0" (Fri, 14 Nov 2025 23:49:07 UTC)
- Re: RETITLED: On aarch64 in a armv7 chroot, I've reproduced the armv7: jemalloc/internal/ehooks.h:170: Failed assertion: "p[i] == 0" [adding: small memory aarch64 behavior] (Sat, 15 Nov 2025 22:02:56 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Mon, 17 Nov 2025 03:04:12 UTC)
- RE: WITHOUT_CLEAN confusion in -current (Mon, 17 Nov 2025 05:57:42 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Mon, 17 Nov 2025 08:24:16 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Mon, 17 Nov 2025 09:15:13 UTC)
- FYI: linux 6.18 arm64 update: Use load LSE atomics for the non-return per-CPU atomic operations (Mon, 17 Nov 2025 14:43:55 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [only main 16 does the check] (Mon, 17 Nov 2025 15:13:56 UTC)
- FYI: RPi5 power consumption reply [Not on topic for original "Future of armv7" message] (Mon, 17 Nov 2025 16:59:54 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Tue, 18 Nov 2025 05:08:29 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [gdb backtrace!] (Tue, 18 Nov 2025 18:18:04 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [gdb backtrace! End of area has 0x5a5a5a5a sequence] (Tue, 18 Nov 2025 18:39:06 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [gdb backtrace! End of area has 0x5a5a5a5a sequence] (Tue, 18 Nov 2025 21:44:59 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [Notes from another example core dump: #1] (Wed, 19 Nov 2025 00:29:08 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [Notes from another example core dump: #1] (Wed, 19 Nov 2025 01:05:51 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [Notes from another example core dump: #1] (Wed, 19 Nov 2025 01:14:46 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [Notes from another example core dump: #2] (Wed, 19 Nov 2025 01:24:12 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [Notes from another example core dump: #3] (Wed, 19 Nov 2025 01:57:21 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [Notes from another example core dump: #4] [New common range #0..#10 __je_pa_alloc] (Wed, 19 Nov 2025 03:03:16 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [Notes from another example core dump: #5] [Common range #0..#10 __je_pa_alloc] (Wed, 19 Nov 2025 06:10:19 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [Notes from another example core dump: #5] [Common range #0..#10 __je_pa_alloc] (Wed, 19 Nov 2025 17:53:13 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [Notes from another example core dump: #5] [Common range #0..#10 __je_pa_alloc] (Wed, 19 Nov 2025 21:04:25 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" [ *** i386 chroot on amd64 can get the failure on main 16 too *** ] (Thu, 20 Nov 2025 23:38:16 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" [ *** i386 chroot on amd64 can get the failure on main 16 too *** ] (Fri, 21 Nov 2025 00:03:17 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Fri, 21 Nov 2025 04:16:55 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" [ *** i386 chroot on amd64 can get the failure on main 16 too *** ] (Fri, 21 Nov 2025 16:30:54 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" [ *** i386 chroot on amd64 can get the failure on main 16 too *** ] [failed without new kernel check detection] (Fri, 21 Nov 2025 18:29:36 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" [ *** i386 chroot on amd64 can get the failure on main 16 too *** ] [failed without new kernel check detection] (Fri, 21 Nov 2025 19:34:21 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" [ junk:true vs. junk:alloc,zero:true ] (Sat, 22 Nov 2025 15:01:39 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld [kib committed git: 72a447d0bc76 that should help] (Mon, 24 Nov 2025 18:34:04 UTC)
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Tue, 25 Nov 2025 03:40:21 UTC)
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Tue, 25 Nov 2025 22:29:12 UTC)
- Michal Meloun
- Milan Obuch
- Nuno Teixeira
- Paul Mather
- qroxana
- Robert Clausecker
- Ronald Klop
- Shiro
- Søren_Schmidt
- titus
- Titus Manea
- Tomek CEDRO
- void
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Sun, 09 Nov 2025 04:07:20 UTC)
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Mon, 10 Nov 2025 00:44:27 UTC)
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Mon, 10 Nov 2025 19:02:35 UTC)
- kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount (Mon, 10 Nov 2025 23:29:10 UTC)
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount (Mon, 10 Nov 2025 23:33:24 UTC)
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount (Tue, 11 Nov 2025 12:45:35 UTC)
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount (Tue, 11 Nov 2025 17:09:46 UTC)
- Re: kernel: warning: total configured swap (493567 pages) exceeds maximum recommended amount (Wed, 12 Nov 2025 01:10:31 UTC)
- was: configured swap now: relative rpi2+ ufs2 nfs random rw speeds (Wed, 12 Nov 2025 12:39:46 UTC)
- Re: was: configured swap now: relative rpi2+ ufs2 nfs random rw speeds (Wed, 12 Nov 2025 23:22:31 UTC)
- WITHOUT_CLEAN confusion in -current (Mon, 17 Nov 2025 01:14:17 UTC)
- Re: WITHOUT_CLEAN confusion in -current (Mon, 17 Nov 2025 09:31:54 UTC)
- Re: Arm v7 RPi2 -current unresponsive to debugger escape during buildworld (Tue, 18 Nov 2025 13:47:49 UTC)
- Warner Losh
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... (Tue, 04 Nov 2025 19:11:11 UTC)
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... (Tue, 04 Nov 2025 19:25:08 UTC)
- Re: I ported the panfrost driver on FreeBSD 15.0 for my radxa zero 3W board,BUT.... (Wed, 05 Nov 2025 08:21:08 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Thu, 13 Nov 2025 08:17:52 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Sat, 15 Nov 2025 23:08:50 UTC)
- Re: Still seeing Failed assertion: "p[i] == 0" on armv7 buildworld (Sun, 16 Nov 2025 17:51:01 UTC)
- Re: WITHOUT_CLEAN confusion in -current (Mon, 17 Nov 2025 06:29:07 UTC)
- Re: arm gicv3 its command time out / patch (Wed, 26 Nov 2025 02:33:11 UTC)
- Re: arm gicv3 its command time out / patch (Wed, 26 Nov 2025 04:10:26 UTC)
- Re: arm gicv3 its command time out / patch (Wed, 26 Nov 2025 05:21:59 UTC)
- Re: arm gicv3 its command time out / patch (Wed, 26 Nov 2025 06:32:41 UTC)