USB GSM still in trouble after upgrade to 11.1-RELEASE-p10

[Willem Jan Withagen]

Hi,

Yesterday evening I upgraded a system to 11.1-RELEASE-p10.
But that sort of upset my GSM-dongle I use for alarming.

And it did not do that before the upgrade, where I was running -p9.


This is what I find repeated at rather high frequency in the logs:
+ugen1.3: <HUAWEI Technologies HUAWEI Mobile> at usbus1
+u3g0 on uhub3
+u3g0: <Data Interface> on usbus1
+u3g0: Found 2 ports.
+umass0 on uhub3
+umass0: <HUAWEI Technologies HUAWEI Mobile, class 0/0, rev 1.10/0.00,
addr 3> on usbus1
+umass0:  SCSI over Bulk-Only; quirks = 0x0000
+umass0:3:0: Attached to scbus3
+(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
+(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
+(probe0:umass-sim0:0:0:0): Retrying command
+(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
+(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
+(probe0:umass-sim0:0:0:0): Retrying command
+(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
+(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
+(probe0:umass-sim0:0:0:0): Retrying command
+(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
+(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
+(probe0:umass-sim0:0:0:0): Retrying command
+(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
+(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
+(probe0:umass-sim0:0:0:0): Error 5, Retries exhausted
+ugen1.3: <HUAWEI Technologies HUAWEI Mobile> at usbus1 (disconnected)
+u3g0: at uhub3, port 2, addr 3 (disconnected)
+u3g0: detached
+umass0: at uhub3, port 2, addr 3 (disconnected)
+umass0: detached

So when I get home, I'm going to pull the stick.
But what could be going on here?

--WjW