Mounting swap partition
Net Warrior
netwarrior863 at gmail.com
Mon Dec 15 16:17:14 UTC 2014
Hi Steve
Sorry, I should have provide much more info, this is 10.1 REL on a Vbox VM
this is the output
FreeBSD 10.1-RELEASE FreeBSD 10.1-RELEASE #0 r274401: Tue Nov 11
21:02:49 UTC 2014
root at releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
camcontrol devlist
<VBOX HARDDISK 1.0> at scbus0 target 0 lun 0 (ada0,pass0)
ass0: <VBOX HARDDISK 1.0> ATA-6 device
pass0: 33.300MB/s transfers (UDMA2, PIO 65536bytes)
protocol ATA/ATAPI-6
device model VBOX HARDDISK
firmware revision 1.0
serial number VB7030ac45-d4933b52
cylinders 16383
heads 16
sectors/track 63
sector size logical 512, physical 512, offset 0
LBA supported 83886080 sectors
LBA48 not supported
PIO supported PIO4 w/o IORDY
DMA supported WDMA2 UDMA6
Feature Support Enabled Value Vendor
read ahead yes yes
write cache yes yes
flush cache yes yes
overlap no
Tagged Command Queuing (TCQ) no no
Native Command Queuing (NCQ) no
NCQ Queue Management no
NCQ Streaming no
Receive & Send FPDMA Queued no
SMART no no
microcode download no no
security no no
power management yes yes
advanced power management no no
automatic acoustic management no no
media status notification no no
power-up in Standby no no
write-read-verify no no
unload no no
general purpose logging no no
free-fall no no
Data Set Management (DSM/TRIM) no
Host Protected Area (HPA) no
Thanks for your time and support
Regards
On 12/15/2014 01:06 PM, Steven Hartland wrote:
> Is your disk attached to ada0?
>
> You can check this with camcontrol e.g.
> camcontrol devlist
> camcontrol identify <device>
>
> Personally I find diskid's more of a hindrance than a help so I
> disable them in /boot/loader.conf with:
> kern.geom.label.disk_ident.enable="0"
>
> For reference the same can be done for gpt and gptid, however gptid
> are more useful:
> kern.geom.label.gpt.enable="0"
> kern.geom.label.gptid.enable="0"
>
> If your using 9.x I would also recommend moving to 10.1, lots of good
> things in this.
>
> Regards
> Steve
>
> On 15/12/2014 15:34, Net Warrior wrote:
>> Hi there guys
>> It's beeen a long time since I do not use FreeBSD, sice 9-RELEASE, now I
>> back on the road and I found lots of cools stuff and thing which I'm
>> trying
>> to assimilate, now I have a simple problem which I cannot solve, cannot
>> activate swap partition, can you lend me a hand with this?
>>
>> root@:~ # gpart show
>> => 34 83886013 diskid/DISK-VB7030ac45-d4933b52 GPT (40G)
>> 34 1024 1 freebsd-boot
>> (512K)
>> 1058 4194304 2 freebsd-swap
>> (2.0G)
>> 4195362 79690685 3 freebsd-zfs
>> (38G)
>>
>>
>> root@:~ # swapinfo
>> Device 1K-blocks Used Avail Capacity
>>
>> root@:~ # swapon -a
>> swapon: /dev/ada0p2: No such file or directory
>>
>> Best regards
>> _______________________________________________
>> freebsd-stable at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
>> To unsubscribe, send any mail to
>> "freebsd-stable-unsubscribe at freebsd.org"
>
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
More information about the freebsd-stable
mailing list