8-STABLE interrupt storm on atapci(?), Dell Inspiron 580
Pyun YongHyeon
pyunyh at gmail.com
Fri Mar 12 19:21:49 UTC 2010
On Fri, Mar 12, 2010 at 07:21:34PM +0100, Pierre Beyssac wrote:
> On Fri, Mar 12, 2010 at 09:46:55AM -0800, Pyun YongHyeon wrote:
> > This is not related with your interrupt storm issue but something
> > is wrong here. I think brgphy(4) should be used for bge(4). Have no
> > idea why the OUI has a different value.
> > Would you try attached patch and let me know whether brgphy(4)
> > get attached to the PHY?
>
> It sort of works (see attached dmesg) but not quite correctly, the
> ethernet link takes an awful lot of time to negotiate (> 10s) and
> it negotiates 10 Mbps instead of 100 Mbps previously.
>
> The message "Unrecognized OUI for PHY!" seems to indicate something's
> amiss, maybe I should regenerate some file(s) after applying your
> patches?
No, it seems there is other issue in brgphy(4). I noticed brgphy(4)
blindly try to set jumbo frame related registers. I guess the PHY
may not have the register. Back out previous patch and try this
one.
-------------- next part --------------
Index: sys/dev/mii/miidevs
===================================================================
--- sys/dev/mii/miidevs (revision 205052)
+++ sys/dev/mii/miidevs (working copy)
@@ -81,6 +81,7 @@
oui xxALTIMA 0x000895 Altima Communications
oui xxBROADCOM 0x000818 Broadcom Corporation
oui xxBROADCOM_ALT1 0x0050ef Broadcom Corporation
+oui xxBROADCOM_ALT2 0x00d897 Broadcom Corporation
oui xxICS 0x00057d Integrated Circuit Systems
oui xxSEEQ 0x0005be Seeq
oui xxSIS 0x000760 Silicon Integrated Systems
@@ -150,6 +151,7 @@
model xxBROADCOM_ALT1 BCM5784 0x003a BCM5784 10/100/1000baseTX PHY
model xxBROADCOM_ALT1 BCM5709C 0x003c BCM5709C 10/100/1000baseTX PHY
model xxBROADCOM_ALT1 BCM5761 0x003d BCM5761 10/100/1000baseTX PHY
+model xxBROADCOM_ALT2 BCM57780 0x0019 BCM57780 10/100/1000baseTX PHY
model BROADCOM2 BCM5906 0x0004 BCM5906 10/100baseTX PHY
/* Cicada Semiconductor PHYs (now owned by Vitesse?) */
Index: sys/dev/mii/brgphy.c
===================================================================
--- sys/dev/mii/brgphy.c (revision 205052)
+++ sys/dev/mii/brgphy.c (working copy)
@@ -139,6 +139,7 @@
MII_PHY_DESC(xxBROADCOM_ALT1, BCM5784),
MII_PHY_DESC(xxBROADCOM_ALT1, BCM5709C),
MII_PHY_DESC(xxBROADCOM_ALT1, BCM5761),
+ MII_PHY_DESC(xxBROADCOM_ALT2, BCM57780),
MII_PHY_DESC(BROADCOM2, BCM5906),
MII_PHY_END
};
@@ -213,6 +214,7 @@
switch (bsc->mii_oui) {
case MII_OUI_BROADCOM:
case MII_OUI_BROADCOM2:
+ case MII_OUI_xxBROADCOM_ALT2:
break;
case MII_OUI_xxBROADCOM:
switch (bsc->mii_model) {
@@ -1021,7 +1023,8 @@
if (bge_sc->bge_flags & BGE_FLAG_JITTER_BUG)
brgphy_fixup_jitter_bug(sc);
- brgphy_jumbo_settings(sc, ifp->if_mtu);
+ if (bge_sc->bge_flags & BGE_FLAG_JUMBO)
+ brgphy_jumbo_settings(sc, ifp->if_mtu);
if (bge_sc->bge_flags & BGE_FLAG_WIRESPEED)
brgphy_ethernet_wirespeed(sc);
More information about the freebsd-stable
mailing list