Named 9.3.1 caching problem AMD64
Mark Sergeant
msergeant at snsonline.net
Mon May 30 03:22:58 PDT 2005
I've got a very unusual problem running a bind caching name server on
AMD64. I've tried FreeBSD-5.4-p1 and 5.4-STABLE and nothing has
helped. Named goes into a "crash" state once hit hits approx 120M of
memory in use, at which point it chews 100% cpu and doesn't respond
to any futher queries. If anyone has any idea on how I can fix this
it would be much appreciated as it's a production system.
The folliowing are the relevant config details ...
system details
FreeBSD zeus 5.4-STABLE FreeBSD 5.4-STABLE #0: Fri May 27 08:50:14
EST 2005 root at zeus:/usr/obj/usr/src/sys/ZEUS amd64
dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 5.4-STABLE #0: Fri May 27 08:50:14 EST 2005
root at zeus:/usr/obj/usr/src/sys/ZEUS
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 250 (2392.55-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0xf5a Stepping = 10
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,
MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory = 2146893824 (2047 MB)
avail memory = 2062729216 (1967 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
netsmb_dev: loaded
acpi0: <PTLTD XSDT> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x8080-0x80ff,0x8000-0x807f,
0xcf8-0xcff iomem 0xd8000-0xdbfff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ohci0: <OHCI (generic) USB controller> mem 0xfb100000-0xfb100fff irq
19 at device 0.0 on pci1
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfb101000-0xfb101fff irq
19 at device 0.1 on pci1
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci1: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port 0x1020-0x102f,
0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <bridge> at device 7.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem
0xfd000000-0xfd00ffff,0xfd010000-0xfd01ffff irq 24 at device 1.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:11:25:1e:1b:ec
bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem
0xfd020000-0xfd02ffff,0xfd030000-0xfd03ffff irq 25 at device 1.1 on pci2
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge1: Ethernet address: 00:11:25:1e:1b:ed
pci0: <base peripheral, interrupt controller> at device 10.1 (no
driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
twe0: <3ware Storage Controller. Driver version 1.50.01.002> port
0x3000-0x300f mem 0xfd800000-0xfdffffff irq 28 at device 3.0 on pci3
twe0: 2 ports, Firmware FE8S 1.05.00.068, BIOS BE7X 1.08.00.048
pci0: <base peripheral, interrupt controller> at device 11.1 (no
driver attached)
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0
sio0: type 16550A, console
orm0: <ISA Option ROMs> at iomem 0xcb000-0xcbfff,0xc9800-0xcafff,
0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_attach: atkbd0 attach returned 6
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
ukbd0: vendor 0x1267 product 0x0103, rev 1.10/1.00, addr 2, iclass 3/1
kbd0 at ukbd0
uhid0: vendor 0x1267 product 0x0103, rev 1.10/1.00, addr 2, iclass 3/1
Timecounters tick every 1.000 msec
IP Filter: v3.4.35 initialized. Default = pass all, Logging = enabled
acd0: CDROM <LG CD-ROM CRN-8245B/1.16> at ata1-master PIO4
twed0: <Unit 0, TwinStor, Normal> on twe0
twed0: 76323MB (156310528 sectors)
SMP: AP CPU #1 Launched!
named.conf
options {
directory "/etc/namedb";
pid-file "/var/run/named/pid";
dump-file "/var/dump/named_dump.db";
statistics-file "/var/stats/named.stats";
recursive-clients 2000;
listen-on { 127.0.0.1; x.x.x.x; };
datasize 512M;
max-cache-size 512M;
};
logging {
channel misc_logfile {
file "/var/log/misc.log" versions 3 size 10M;
severity info;
print-category yes;
print-severity yes;
print-time yes;
};
channel config_logfile {
file "/var/log/config.log" versions 3 size 10M;
severity info;
print-category yes;
print-severity yes;
print-time yes;
};
channel security_logfile {
file "/var/log/security.log" versions 3 size 10M;
severity info;
print-category yes;
print-severity yes;
print-time yes;
};
channel xfer_logfile {
file "/var/log/xfer.log" versions 3 size 10M;
severity info;
print-category yes;
print-severity yes;
print-time yes;
};
category default { misc_logfile; };
category config { config_logfile; };
category lame-servers { null; };
category notify { xfer_logfile; };
category queries { null; };
category security { security_logfile; };
category update { xfer_logfile; };
category xfer-in { xfer_logfile; };
category xfer-out { xfer_logfile; };
};
zone "." {
type hint;
file "named.root";
};
zone "0.0.127.IN-ADDR.ARPA" {
type master;
file "master/localhost.rev";
};
// RFC 3152
zone
"1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARP
A" {
type master;
file "master/localhost-v6.rev";
};
// RFC 1886 -- deprecated
zone
"1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.INT
" {
type master;
file "master/localhost-v6.rev";
};
More information about the freebsd-stable
mailing list