burncd freeze system

[Norbert Augenstein]

    Hallo list,
    i have tried to burn an iso of 26MB of size, and my system locks
    up so i have to reboot.
    The image was created with:

    mkisofs -l -J -r -o output.iso burndir/
    
    and the burncommand was:

    burncd -f /dev/acd1 -s 4 data output.iso fixate

    After reboot i can find in /var/log/messages:

    Jan  3 23:40:07 seth kernel: acd1: unknown transfer phase
    Jan  3 23:40:17 seth kernel: acd1: FAILURE - ATAPI_IDENTIFY
    timed out
    Jan  3 23:40:17 seth kernel: acd1: timeout sending command=a1
    Jan  3 23:40:17 seth kernel: acd1: error issueing ATAPI_IDENTIFY
    command
    Jan  3 23:41:27 seth syslogd: kernel boot file is
    /boot/kernel/kernel

    The system freezes while fixating the disc, so burncd -t shows
    no error. 
    
    As i can burn it in Win, i am out of ideas.
    
    --> auge


dmesg:

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE-p2 #0: Fri Dec 24 02:42:28 CET 2004
    auge at seth.augenstein.net:/usr/obj/usr/src/sys/AUGE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(TM) XP 2600+ (2083.11-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 536854528 (511 MB)
avail memory = 511483904 (487 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7V8X> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI link \\_SB_.LNKE has invalid initial irq 15, ignoring
ACPI link \\_SB_.LNKF has invalid initial irq 9, ignoring
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce4 Ti 4200> mem 0xe7800000-0xe787ffff,0xe8000000-0xefffffff,0xe6000000-0xe6ffffff irq 11 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xe5800000-0xe5801fff irq 10 at device 9.0 on pci0
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:e0:18:c0:c7:28
bfe0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xb800-0xb80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pcm0: <VIA VT8235> port 0xe000-0xe0ff at device 17.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC650 AC97 Codec>
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model MouseMan+, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2083105636 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 57241MB <ST360015A/3.31> [116301/16/63] at ata0-master UDMA100
acd0: DVDROM <TOSHIBA DVD-ROM SD-M1712/1004> at ata1-master UDMA33
acd1: CDRW <CD-RW CR52/Ver 3.70> at ata1-slave UDMA33
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /var was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /home was not properly dismounted

    
-- 
11:50PM  up 2 days,  2:55, 0 users, load averages: 0.00, 0.00, 0.00
========================================================================
Does the name Pavlov ring a bell?