Asus P4P800 SE RAID1 on Intel ICH5 not working

[Wilko Bulte]

On Sun, Dec 12, 2004 at 10:46:53AM +0100, Jorn Argelo wrote..
> On Sun, 12 Dec 2004 09:50:05 +0100, Niels Piersma wrote
> > Hi,
> > 
> > I want to use the RAID1 on this ASUS mobo. I've configured it as 
> > RAID1 in the bios, but BSD53 just sees two discs and not a RAID1 
> > array. (ad4 and ad6). The drives are two identical Maxtor 80Gb SATA discs.
> > 
> 
> Are you sure that you actually made an RAID1 array using the BIOS of the RAID 
> controller itself?
> 
> Other then that, I am not sure if FreeBSD 5.3 is going to support your RAID 
> controller. Mine was never fully detected neither by BSD nor Linux (I have an 
> ASUS K8V SE Deluxe). If you array is not detected, then the odds are 
> relatively high that you will have to switch to FreeBSD 4.10, which has a 
> massive amount of support for several RAID- and SCSI controllers.
> 
> > Piersma.COM is een handelsnaam van Piersma Beheer B.V.
> 
> You might want to consider not writing anything in Dutch on a public mailing 
> list. Most folks won't understand it anyway ;).

Its a legal disclaimer.  ETOOMANYLAWYERSONTHISPLANET

-- 
Wilko Bulte				wilko at FreeBSD.org