To date can use different bsd mode -graph, text , starter , expert -how take from 200 gb,which are not used some 50-80 gb for bsd test ?

[swjatoslaw gerus]

freebsd  root  user can have folloving situation

allocated 140 gb  of hdd but used only 20 gb

he can decrease space allocation with some command untill 50 gb

Or ?   if that is the  case tnan in linux must be some comporable
command
for root 

After this command performed would that reflected  in freebsd loader ?
if yes than this is more correct  vs erase   (risk limited)


-- 
  swjatoslaw  gerus
  milstar2 at eml.cc

On Mon, Jan 2, 2017, at 10:25 PM, swjatoslaw gerus wrote:
> 1.To date can  use different bsd  loader mode  -graph,text ,starter
> ,expert -how take from 200 gb,which are   not used some 50-80 gb  for 
> bsd test ?
> 
> limit risk 
> #############
> 2. edit partion 
> linux data  153 gb 
> modify
> 
>  system asked about mountpoint   ...
> 
> -- 
>   swjatoslaw  gerus
>   milstar2 at eml.cc
> 
> On Mon, Jan 2, 2017, at 09:41 PM, swjatoslaw gerus wrote:
> > extra keyboard  not accepted  for single user bsd text installer
> > poweroff  poweron
> > both linux sda1 sda6 recovery mode 
> > poweroff    plugin  sandisk ,poweron
> > 2 -single user text
> > 
> > test extrqa keyboard   
> > extra keyboard accepted 
> > #######################
> > 
> >   Exist any possbility  to check disk from this mode ?
> > Is this option more suited for single user  ? 
> >  
> > 
> > -- 
> >   swjatoslaw  gerus
> >   milstar2 at eml.cc
> > 
> > On Mon, Jan 2, 2017, at 09:07 PM, Polytropon wrote:
> > > On Mon, 02 Jan 2017 20:25:48 +0100, swjatoslaw gerus wrote:
> > > > Why don't you just remove one of the Linux installationy you have?
> > > > 
> > > > yes ready to perform   this taskbut  
> > > > 
> > > > in linux grub 1 installation 32 bit 16.04  sda1
> > > > 2 installation   64 bit     16.04     sda6  was made 1 month later after
> > > > 1
> > > 
> > > GRUB will have no problem. So you currently have this layout:
> > > 
> > > 	sda1 = Ubuntu 32 Bit
> > > 
> > > 	sda6 = Ubuntu 64 Bit
> > > 
> > > You can easily verify if this is correct: Boot the 1st
> > > Linux and issue the command "mount": You will see which
> > > partition it has been mounting as a root partition, for
> > > example this could be sda1. Then you shut down, boot
> > > the other installation, issue "mount" again and see that
> > > the root partition is sda6. Now you know which partition
> > > corresponds to which Ubuntu version.
> > > 
> > > If you are unsure, post the full output of the "mount"
> > > command to the list. For illustration, here's an example
> > > from a FreeBSD system (note the different names of the
> > > partitions):
> > > 
> > > 	% mount
> > > 	/dev/ada0p2 on / (ufs, local, journaled soft-updates)
> > > 
> > > Look which device is mounted on / (the root partition).
> > > 
> > > The 64 bit version is the one that you are _not_ using at
> > > the moment, i. e., the one that doesn't work properly. So
> > > just remove that partition. You can do it with the manual
> > > partitioning from within the FreeBSD installer, or using
> > > gparted from the 32 bit Ubuntu.
> > > 
> > > 
> > > 
> > > > bsd  loader  notation another  
> > > 
> > > Yes, that is obvious and has already been explained.
> > > 
> > > 
> > > 
> > > > which of is first ? would  try to check bsd loader
> > > 
> > > The FreeBSD loader won't be much help here, it's not even
> > > installed.
> > > 
> > > 
> > > 
> > > >  but  would not  possible if erase  installation 1  grub  would allocate 
> > > > all disk  to 2 linux ?
> > > 
> > > GRUB is a boot manager, it does not magically assign partitions.
> > > It just lets you select from what is present on the disk. After
> > > you've removed one partition, the GRUB loader screen will have
> > > one entry less, or the "remaining" entry just won't work.
> > > 
> > > Again: Make sure the space freed by removing one partition is
> > > not being "formatted" afterwards. You can check that with the
> > > fdisk program: One partition (sda1, for example) is assigned
> > > to Linux, the remining disk space is _not_ assigned. It will
> > > then be listed as free (available) space in the FreeBSD installer.
> > > The installer will put FreeBSD into that space.
> > > 
> > > Later on, when you're ready to say goodbye to the troublesome
> > > Linux, you can delete that partition, and use it as a data
> > > partition (or maybe /home partition) for FreeBSD. Or you keep
> > > it as a "backup system", just in case.
> > > 
> > > 
> > > 
> > > 
> > > -- 
> > > Polytropon
> > > Magdeburg, Germany
> > > Happy FreeBSD user since 4.0
> > > Andra moi ennepe, Mousa, ...
> > 
> > -- 
> > http://www.fastmail.com - The professional email service
> > 
> 
> -- 
> http://www.fastmail.com - A fast, anti-spam email service.
> 

-- 
http://www.fastmail.com - Faster than the air-speed velocity of an
                          unladen european swallow