hp 1020 printer not working
Alexander Sashurin
sashome at m-lan.ru
Sun Nov 12 11:53:47 UTC 2006
*This message was transferred with a trial version of CommuniGate(r) Pro*
Sergio Lenzi wrote:
> *This message was transferred with a trial version of CommuniGate(r) Pro*
> Hello... has anyone been able to make an HP1020 printer
> work in FreeBSD 6.1-RELEASE????
>
> it finds the printer, attaches it, but when I try to boot the rom code
> (shihp1020.img)
> it blocks ... for the trace below you can see that it does not open the
> printer,
> usb status is 0x00 and error is 15....
>
> Have any solution to this????
>
>
> Thanks in advance
>
> Sergio
> =========================================
>
> Nov 9 19:35:07 kernel: ulpt0: detached
> Nov 9 19:35:21 kernel: ulpt_match
> Nov 9 19:35:21 last message repeated 2 times
> Nov 9 19:35:21 kernel: ulpt_attach: sc=0xc49e9080
> Nov 9 19:35:21 kernel: ulpt0: Hewlett-Packard HP LaserJet 1020, rev
> 2.00/1.00, addr 2, iclass 7/1
> Nov 9 19:35:21 kernel: ulpt0: using bi-directional mode
> Nov 9 19:35:21 kernel: ulpt0: debug 1
> Nov 9 19:35:21 kernel: ulpt_attach: bulk=1
> Nov 9 19:35:27 kernel: ulptopen: flags=0x40
> Nov 9 19:35:32 kernel: ulpt_status: status=0x00 err=15
> Nov 9 19:35:32 kernel: ulpt_open: waiting a while
> Nov 9 19:35:38 kernel: ulpt_status: status=0xe0 err=15
> Nov 9 19:35:38 kernel: ulpt_open: waiting a while
> Nov 9 19:35:43 kernel: ulpt_status: status=0xe0 err=15
> Nov 9 19:35:43 kernel: ulpt_open: waiting a while
> Nov 9 19:35:48 kernel: ulpt_status: status=0xe0 err=15
> Nov 9 19:35:48 kernel: ulpt_open: waiting a while
> Nov 9 19:35:53 kernel: ulpt_status: status=0xe0 err=15
> Nov 9 19:35:53 kernel: ulpt_open: waiting a while
> Nov 9 19:35:55 kernel: ulpt0: at uhub2 port 3 (addr 2) disconnected
> Nov 9 19:35:55 kernel: ulpt_detach: sc=0xc49e9080
> Nov 9 19:35:59 kernel: ulpt_status: status=0xe0 err=15
> Nov 9 19:35:59 kernel: ulpt_open: waiting a while
> Nov 9 19:35:59 kernel: ulptopen: done, error=6
> Nov 9 19:36:09 kernel: ulpt0: detached
>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
>
>
first you should build the kernel without ulpt driver.
then you should get foo2zjs and follow the instructions in the readme
file. if you'll have any questions - report me!
--
With best regards,
Alexander Sashurin a.k.a. ZetRooT or WinterSilence
- - - - - - - - - - - - - - - - - - -
| Mailto: alexander.sashurin at gmail.com |
| ICQ: 258820442 |
| Mobile: +7-916-195-89-11 |
| irc: irc.wenet.ru, _ZetRooT_ |
- - - - - - - - - - - - - - - - - - -
More information about the freebsd-questions
mailing list