cmpq dl380 server. ipmi bmc question

[Aaron Sloan]

Hello guys and gals,



Does system fan control on a Compaq DL380 ,first edition, have any support?
Sounds like a jet at idle in the machine room.

I have looked through the acpi and port recomendations I have come 
across via google and I'm not having any luck at all.  I believe it is supported in Linux 
but I don't know how. I can't say I'm any hardware wizard on this kind of thing.

Update:  I installed freeipmi and ipmitool and I'm not having any luck with these apps.
The cli commands are apparently over my head because I haven't been able to get it to work and now my head hurts.
Am I barking up the right tree or just peeing on it?
HP was not terribly helpful. All the recent ROMpaks have been installed.
Thanks,
Aaron

%sysctl hw.acpi

hw.acpi.supported_sleep_state: S4 S5

hw.acpi.power_button_state: S5

hw.acpi.sleep_button_state: S4

hw.acpi.lid_switch_state: NONE

hw.acpi.standby_state: S1

hw.acpi.suspend_state: S3

hw.acpi.sleep_delay: 1

hw.acpi.s4bios: 0

hw.acpi.verbose: 0

hw.acpi.reset_video: 1

hw.acpi.cpu.cx_supported: C1/0

hw.acpi.cpu.cx_lowest: C1

hw.acpi.cpu.cx_usage: 100.00%

hw.acpi.thermal.min_runtime: 0

hw.acpi.thermal.polling_rate: 10

hw.acpi.thermal.tz0.temperature: 8.3C

hw.acpi.thermal.tz0.active: -1

hw.acpi.thermal.tz0.thermal_flags: 0

hw.acpi.thermal.tz0._PSV: 9.8C

hw.acpi.thermal.tz0._HOT: -1

hw.acpi.thermal.tz0._CRT: 31.3C

hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1



GENERIC kernel

Is acpi0 <compaq racebait>  what I should be looking for or

is there another system controlling the system/case fan?





CPU: Intel Pentium III (996.85-MHz 686-class CPU)

 Origin = "GenuineIntel"  Id = 0x686  Stepping = 6

 

Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>

real memory  = 536854528 (511 MB)

avail memory = 515682304 (491 MB)

ACPI APIC Table: <COMPAQ 00000083>

ioapic0: Changing APIC ID to 8

MADT: Forcing active-low polarity and level trigger for SCI

ioapic0 <Version 1.1> irqs 0-34 on motherboard

npx0: <math processor> on motherboard

npx0: INT 16 interface

acpi0: <COMPAQ RACEBAIT> on motherboard

acpi0: Power Button (fixed)

Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000

acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0

cpu0: <ACPI CPU> on acpi0

pcib0: <ACPI Host-PCI bridge> on acpi0

pci0: <ACPI PCI bus> on pcib0

ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem 
0xc5000000-0xc5ffffff,0xc6000000-0xc6ffffff irq 19 at device 1.0 on pci0

ida0: drives=1 firm_rev=1.50

idad0: <Compaq Logical Drive> on ida0

idad0: 26017MB (53284800 sectors), blocksize=512

fxp0: <Intel 82559 Pro/100 Ethernet> port 0x2400-0x243f mem 
0xc4e00000-0xc4efffff,0xc4fff000-0xc4ffffff irq 17 at device 2.0 on pci0

miibus0: <MII bus> on fxp0

inphy0: <i82555 10/100 media interface> on miibus0

inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

fxp0: Ethernet address: 00:02:a5:64:e6:95

pci0: <display, VGA> at device 3.0 (no driver attached)

pci0: <base peripheral> at device 4.0 (no driver attached)

isab0: <PCI-ISA bridge> at device 15.0 on pci0

isa0: <ISA bus> on isab0

atapci0: <ServerWorks ROSB4 UDMA33 controller> port 
0x2c00-0x2c0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0

ata0: channel #0 on atapci0

ata1: channel #1 on atapci0

pcib1: <ACPI Host-PCI bridge> on acpi0

pci3: <ACPI PCI bus> on pcib1

acpi_tz0: <Thermal Zone> on acpi0

atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0

atkbd0: <AT Keyboard> irq 1 on atkbdc0

kbd0 at atkbd0

psm0: <PS/2 Mouse> irq 12 on atkbdc0

psm0: model MouseMan+, device ID 0

ppc0: <Standard parallel printer port> port 0x778-0x77d,0x378-0x37f irq 
7 drq 0 on acpi0

ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode

ppbus0: <Parallel port bus> on ppc0

plip0: <PLIP network interface> on ppbus0

lpt0: <Printer> on ppbus0

lpt0: Interrupt-driven port

ppi0: <Parallel I/O> on ppbus0

fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0

fd0: <1440-KB 3.5" drive> on fdc0 drive 0

sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0

sio0: type 16550A

sio1: <Standard PC COM port> port 0x2f8-0x2ff irq 3 on acpi0

sio1: type 16550A

orm0: <ISA Option ROMs> at iomem 
0xee000-0xeffff,0xe8000-0xedfff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0

pmtimer0 on isa0

sc0: <System console> at flags 0x100 on isa0

sc0: VGA <16 virtual consoles, flags=0x300>

vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

Timecounter "TSC" frequency 996849075 Hz quality 800

Timecounters tick every 10.000 msec

acd0: CDROM <COMPAQ CD-ROM SN-124Q/QA17> at ata0-master PIO4

Mounting root from ufs:/dev/idad0s2a





Thanks,

Aaron