Buildworld ERROR CODE 2
Kent Stewart
kstewart at owt.com
Mon Jun 16 22:15:53 PDT 2003
On Monday 16 June 2003 09:02 pm, Duke, Brian wrote:
> ok I didn't get an answer on my first email so I tried to do a complete
> buildworld here is a transcript of the output:
>
> ranlib libc_pic.a
> ranlib libc_p.a
> ranlib libc.a
> install -C -C -o root -g wheel -m 444 libc.a /usr/obj/usr/src/i386/usr/lib
> install -C -C -o root -g wheel -m 444 libc_p.a
> /usr/obj/usr/src/i386/usr/lib install -C -s -o root -g wheel -m 444
> libc.so.5 /usr/obj/usr/src/i386/usr/lib ln -fs libc.so.5
> /usr/obj/usr/src/i386/usr/lib/libc.so
> install -C -o root -g wheel -m 444 libc_pic.a
> /usr/obj/usr/src/i386/usr/lib 1 error
> *** Error code 2
> 1 error
> *** Error code 2
> 1 error
> *** Error code 2
>
> I made only moderate changes to the make.conf...like my CPUBuild=i586.
> I am in single user mode. Someone please help. I am NOT good enough to
> troubleshoot this.
>
> > -----Original Message-----
> > From: Duke, Brian
> > Sent: Monday, June 16, 2003 2:57 AM
> > To: 'freebsd-questions at freebsd.org'
> > Subject: /usr/src/sys/dev/en/midway.c:1607: dereferencing pointer to
> > incomplete type
> >
> > I cannot seem to rebuild my kernel. I wanted to get my sound card working
> > so I included the "device pcm" directive in my kernel config and I got
> > an error as below.. I could use a hand here if somone has seen this kind
> > of error.
> > Here is the end of the output of the failed compile
> > rain# cd /usr/src
> > rain# make buildkernel KERNCONF=RAINBUILD
> >
> > error:
> >
> > ===> en
> > cc -O -pipe -mcpu=pentiumpro -DENABLE_BPF -D_KERNEL -Wall
> > -Wredundant-decls -Wnested-externs -Wstrict-prototypes
> > -Wmissing-prototypes -Wpointer-arith -Winline -Wcast- qual
> > -fformat-extensions -std=c99 -DKLD_MODULE -nostdinc -I- -I. -I@ -I@/dev
This looks like one of those problems they have been dealing with on -current.
They changed the -std option and I think you need to re-cvsup and start over.
The old rule on make.conf is that if you add something and it doesn't work.
Comment it out and start over. I think you have dug a deep hole and fell in.
I don't have any idea on the solution.
Kent
> > -I@/../include -fno-common -g -mno-align-long-strings
> > -mpreferred-stack-boundary=2 -ffre estanding -Wall -Wredundant-decls
> > -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes
> > -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -std=c99 -c
> > /usr/ src/sys/pci/if_en_pci.c
> > cc -O -pipe -mcpu=pentiumpro -DENABLE_BPF -D_KERNEL -Wall
> > -Wredundant-decls -Wnested-externs -Wstrict-prototypes
> > -Wmissing-prototypes -Wpointer-arith -Winline -Wcast- qual
> > -fformat-extensions -std=c99 -DKLD_MODULE -nostdinc -I- -I. -I@ -I@/dev
> > -I@/../include -fno-common -g -mno-align-long-strings
> > -mpreferred-stack-boundary=2 -ffre estanding -Wall -Wredundant-decls
> > -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes
> > -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -std=c99 -c
> > /usr/ src/sys/dev/en/midway.c
> > /usr/src/sys/dev/en/midway.c: In function `en_get_vccs':
> > /usr/src/sys/dev/en/midway.c:1474: dereferencing pointer to incomplete
> > type /usr/src/sys/dev/en/midway.c:1474: dereferencing pointer to
> > incomplete type /usr/src/sys/dev/en/midway.c:1479: dereferencing pointer
> > to incomplete type /usr/src/sys/dev/en/midway.c:1480: dereferencing
> > pointer to incomplete type /usr/src/sys/dev/en/midway.c:1488:
> > dereferencing pointer to incomplete type
> > /usr/src/sys/dev/en/midway.c:1492: dereferencing pointer to incomplete
> > type /usr/src/sys/dev/en/midway.c:1493: dereferencing pointer to
> > incomplete type /usr/src/sys/dev/en/midway.c:1493: `ATMIO_FLAG_PVC'
> > undeclared (first use in this function)
> > /usr/src/sys/dev/en/midway.c:1493: (Each undeclared identifier is
> > reported only once /usr/src/sys/dev/en/midway.c:1493: for each function
> > it appears in.) /usr/src/sys/dev/en/midway.c:1494: dereferencing pointer
> > to incomplete type /usr/src/sys/dev/en/midway.c:1495: dereferencing
> > pointer to incomplete type /usr/src/sys/dev/en/midway.c:1497:
> > dereferencing pointer to incomplete type
> > /usr/src/sys/dev/en/midway.c:1497: `ATMIO_AAL_5' undeclared (first use in
> > this function) /usr/src/sys/dev/en/midway.c:1499: dereferencing pointer
> > to incomplete type /usr/src/sys/dev/en/midway.c:1499: `ATMIO_AAL_0'
> > undeclared (first use in this function)
> > /usr/src/sys/dev/en/midway.c:1500: dereferencing pointer to incomplete
> > type> /usr/src/sys/dev/en/midway.c:1500: `ATMIO_TRAFFIC_UBR' undeclared
> > (first use in this function) /usr/src/sys/dev/en/midway.c:1501:
> > dereferencing pointer to incomplete type
> > /usr/src/sys/dev/en/midway.c:1502: increment of pointer to unknown
> > structure /usr/src/sys/dev/en/midway.c:1502: arithmetic on pointer to an
> > incomplete type /usr/src/sys/dev/en/midway.c: In function `en_ioctl':
> > /usr/src/sys/dev/en/midway.c:1591: `SIOCATMGETVCCS' undeclared (first use
> > in this function) /usr/src/sys/dev/en/midway.c:1600: `SIOCATMGVCCS'
> > undeclared (first use in this function)
> > /usr/src/sys/dev/en/midway.c:1606: dereferencing pointer to incomplete
> > type /usr/src/sys/dev/en/midway.c:1607: dereferencing pointer to
> > incomplete type /usr/src/sys/dev/en/midway.c:1607: dereferencing pointer
> > to incomplete type *** Error code 1
> >
> > Stop in /usr/src/sys/modules/en.
> > *** Error code 1
> >
> > Stop in /usr/src/sys/modules.
> > *** Error code 1
> >
> > Stop in /usr/obj/usr/src/sys/RAINBUILD.
> > *** Error code 1
> >
> > Stop in /usr/src.
> > *** Error code 1
> >
> > Stop in /usr/src.
> > rain#
> >
> > My FreeBSD version number
> > 5.1 cvsup with new STANDARD-SUPFILE and PORTS-SUPFILE
> >
> >
> > The contents of /var/run/dmesg/boot
> > syncing disks, buffers remaining... 1 1
> > done
> > Uptime: 5h20m12s
> > Rebooting...
> > Copyright (c) 1992-2003 The FreeBSD Project.
> > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> > The Regents of the University of California. All rights reserved.
> > FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003
> > root at wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
> > Preloaded elf kernel "/boot/kernel/kernel" at 0xc0689000.
> > Timecounter "i8254" frequency 1193182 Hz
> > Timecounter "TSC" frequency 597405320 Hz
> > CPU: Intel Pentium III (597.41-MHz 686-class CPU)
> > Origin = "GenuineIntel" Id = 0x683 Stepping = 3
> >
> > Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CM
> >OV,PAT,PSE36,MMX,FXSR,SSE> real memory = 268435456 (256 MB)
> > avail memory = 253681664 (241 MB)
> > Pentium Pro MTRR support enabled
> > npx0: <math processor> on motherboard
> > npx0: INT 16 interface
> > pcibios: BIOS version 2.10
> > Using $PIR table, 9 entries at 0xc00ede10
> > pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on
> > motherboard pci0: <PCI bus> on pcib0
> > agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem
> > 0x44000000-0x47ffffff at device 0.0 on pci0 pcib1: <PCIBIOS PCI-PCI
> > bridge> at device 1.0 on pci0
> > pci1: <PCI bus> on pcib1
> > pci1: <display, VGA> at device 0.0 (no driver attached)
> > fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port
> > 0x2000-0x203f mem 0x41100000-0x411fffff,0x41200000-0x41200fff irq 11 at
> > device 18.0 on pci0
> > fxp0: Ethernet address 00:d0:b7:52:e2:ef
> > miibus0: <MII bus> on fxp0
> > inphy0: <i82555 10/100 media interface> on miibus0
> > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> > isab0: <PCI-ISA bridge> at device 20.0 on pci0
> > isa0: <ISA bus> on isab0
> > atapci0: <Intel PIIX4 UDMA33 controller> port 0x2060-0x206f at device
> > 20.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0
> > ata1: at 0x170 irq 15 on atapci0
> > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2040-0x205f irq
> > 11 at device 20.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller>
> > on uhci0
> > usb0: USB revision 1.0
> > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> > uhub0: 2 ports with 2 removable, self powered
> > pci0: <bridge, PCI-unknown> at device 20.3 (no driver attached)
> > orm0: <Option ROMs> at iomem
> > 0xe0000-0xe7fff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0
> > atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
> > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> > kbd0 at atkbd0
> > psm0: <PS/2 Mouse> irq 12 on atkbdc0
> > psm0: model Generic PS/2 mouse, device ID 0
> > fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
> > 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0> fdc0: FIFO enabled, 8 bytes
> > threshold
> > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> > ppc0: FIFO with 16/16/8 bytes threshold
> > ppbus0: <Parallel port bus> on ppc0
> > plip0: <PLIP network interface> on ppbus0
> > lpt0: <Printer> on ppbus0
> > lpt0: Interrupt-driven port
> > ppi0: <Parallel I/O> on ppbus0
> > sc0: <System console> at flags 0x100 on isa0
> > sc0: VGA <16 virtual consoles, flags=0x300>
> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> > sio0: type 16550A
> > sio1 at port 0x2f8-0x2ff irq 3 on isa0
> > sio1: type 16550A
> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> > unknown: <PNP0401> can't assign resources (port)
> > unknown: <PNP0501> can't assign resources (port)
> > unknown: <PNP0501> can't assign resources (port)
> > unknown: <PNP0700> can't assign resources (port)
> > unknown: <PNP0303> can't assign resources (port)
> > unknown: <PNP0f13> can't assign resources (irq)
> > unknown: <PNP0c02> can't assign resources (port)
> > Timecounters tick every 10.000 msec
> > ad0: 9541MB <Maxtor 51024U2> [19386/16/63] at ata0-master UDMA33
> > acd0: DVD-ROM <MATSHITADVD-ROM SR-8583> at ata1-master PIO4
> > Mounting root from ufs:/dev/ad0s1a
> >
> > The output of "uname -a "
> >
> > >rain# uname -a
> > >FreeBSD rain.l3.com 5.1-RELEASE FreeBSD 5.1-RELEASE #0: Thu Jun 5
> > > 02:55:42 GMT 2003
> > > root at wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC i386
> >
> > The kernel config file
> > rain# cat /root/kernels/RAINBUILD
> > #
> > # GENERIC -- Generic kernel configuration file for FreeBSD/i386
> > #
> > # For more information on this file, please read the handbook section on
> > # Kernel Configuration Files:
> > #
> > #
> > http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-co
> >nfig.html #
> > # The handbook is also available locally in /usr/share/doc/handbook
> > # if you've installed the doc distribution, otherwise always see the
> > # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
> > # latest information.
> > #
> > # An exhaustive list of options and more detailed explanations of the
> > # device lines is also present in the ../../conf/NOTES and NOTES files.
> > # If you are in doubt as to the purpose or necessity of a line, check
> > first # in NOTES.
> > #
> > # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.386 2003/06/08 02:03:01
> > jmallett Exp $
> >
> > machine i386
> > cpu I486_CPU
> > cpu I586_CPU
> > cpu I686_CPU
> > ident GENERIC
> >
> > #To statically compile in device wiring instead of /boot/device.hints
> > #hints "GENERIC.hints" #Default places to look for
> > devices.
> >
> > makeoptions DEBUG=-g #Build kernel with gdb(1) debug
> > symbols
> >
> > options SCHED_4BSD #4BSD scheduler
> > options INET #InterNETworking
> > options INET6 #IPv6 communications protocols
> > options FFS #Berkeley Fast Filesystem
> > options SOFTUPDATES #Enable FFS soft updates support
> > options UFS_ACL #Support for access control lists
> > options UFS_DIRHASH #Improve performance on big
> > directories options MD_ROOT #MD is a potential
> > root device options NFSCLIENT #Network Filesystem
> > Client options NFSSERVER #Network Filesystem Server
> > options NFS_ROOT #NFS usable as /, requires
> > NFSCLIENT options MSDOSFS #MSDOS Filesystem
> > options CD9660 #ISO 9660 Filesystem
> > options PROCFS #Process filesystem (requires
> > PSEUDOFS) options PSEUDOFS #Pseudo-filesystem
> > framework options COMPAT_43 #Compatible with BSD
> > 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 #Compatible with
> > FreeBSD4> options SCSI_DELAY=15000 #Delay (in ms) before
> > probing SCSI options KTRACE #ktrace(1) support
> > options SYSVSHM #SYSV-style shared memory
> > options SYSVMSG #SYSV-style message queues
> > options SYSVSEM #SYSV-style semaphores
> > options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time
> > extensions options KBD_INSTALL_CDEV # install a CDEV entry
> > in /dev options AHC_REG_PRETTY_PRINT # Print register
> > bitfields in debug # output. Adds ~128k to driver. options
> > AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output.
> > Adds ~215k to driver.
> >
> > # Debugging for use in -current
> > options DDB #Enable the kernel debugger
> > options INVARIANTS #Enable calls of extra sanity
> > checking options INVARIANT_SUPPORT #Extra sanity checks of
> > internal structures, required by INVARIANTS options WITNESS
> > #Enable checks to detect deadlocks and cycles options
> > WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
> >
> > # To make an SMP kernel, the next two are needed
> > #options SMP # Symmetric MultiProcessor Kernel
> > #options APIC_IO # Symmetric (APIC) I/O
> >
> > device isa
> > device eisa
> > device pci
> > device pcm
> >
> > # Floppy drives
> > device fdc
> >
> > # ATA and ATAPI devices
> > device ata
> > device atadisk # ATA disk drives
> > device atapicd # ATAPI CDROM drives
> > device atapifd # ATAPI floppy drives
> > device atapist # ATAPI tape drives
> > options ATA_STATIC_ID #Static device numbering
> >
> > # SCSI Controllers
> > device ahb # EISA AHA1742 family
> > device ahc # AHA2940 and onboard AIC7xxx devices
> > device ahd # AHA39320/29320 and onboard AIC79xx
> > devices device amd # AMD 53C974 (Tekram DC-390(T))
> > device isp # Qlogic family
> > device mpt # LSI-Logic MPT-Fusion
> > #device ncr # NCR/Symbios Logic
> > device sym # NCR/Symbios Logic (newer chipsets +
> > those of `ncr') device trm # Tekram DC395U/UW/F
> > DC315U adapters
> >
> > device adv # Advansys SCSI adapters
> > device adw # Advansys wide SCSI adapters
> > device aha # Adaptec 154x SCSI adapters
> > device aic # Adaptec 15[012]x SCSI adapters,
> > AIC-6[23]60. device bt # Buslogic/Mylex MultiMaster
> > SCSI adapters
> >
> > device ncv # NCR 53C500
> > device nsp # Workbit Ninja SCSI-3
> > device stg # TMC 18C30/18C50
> >
> > # RAID controllers interfaced to the SCSI subsystem
> > device asr # DPT SmartRAID V, VI and Adaptec SCSI
> > RAID device ciss # Compaq Smart RAID 5*
> > device dpt # DPT Smartcache III, IV - See NOTES for
> > options! device iir # Intel Integrated RAID
> > device mly # Mylex AcceleRAID/eXtremeRAID
> >
> > # SCSI peripherals
> > device scbus # SCSI bus (required for SCSI)
> > device ch # SCSI media changers
> > device da # Direct Access (disks)
> > device sa # Sequential Access (tape etc)
> > device cd # CD
> > device pass # Passthrough device (direct SCSI access)
> > device ses # SCSI Environmental Services (and
> > SAF-TE)>
> >
> > # RAID controllers
> > device aac # Adaptec FSA RAID
> > device aacp # SCSI passthrough for aac (requires CAM)
> > device amr # AMI MegaRAID
> > device ida # Compaq Smart RAID
> > device ips # IBM (Adaptec) ServeRAID
> > device mlx # Mylex DAC960 family
> > device pst # Promise Supertrak SX6000
> > device twe # 3ware ATA RAID
> >
> > # atkbdc0 controls both the keyboard and the PS/2 mouse
> > device atkbdc # AT keyboard controller
> > device atkbd # AT keyboard
> > device psm # PS/2 mouse
> >
> > device vga # VGA video card driver
> >
> > device splash # Splash screen and screen saver support
> >
> > # syscons is the default console driver, resembling an SCO console
> > device sc
> >
> > # Enable this for the pcvt (VT220 compatible) console driver
> > #device vt
> > #options XSERVER # support for X server on a vt
> > console #options FAT_CURSOR # start with block cursor
> >
> > device agp # support several AGP chipsets
> >
> > # Floating point support - do not disable.
> > device npx
> >
> > # Power management support (see NOTES for more options)
> > #device apm
> > # Add suspend/resume support for the i8254.
> > device pmtimer
> >
> > # PCCARD (PCMCIA) support
> > # Pcmcia and cardbus bridge support
> > device cbb # cardbus (yenta) bridge
> > #device pcic # ExCA ISA and PCI bridges
> > device pccard # PC Card (16-bit) bus
> > device cardbus # CardBus (32-bit) bus
> >
> > # Serial (COM) ports
> > device sio # 8250, 16[45]50 based serial ports
> >
> > # Parallel port
> > device ppc
> > device ppbus # Parallel port bus (required)
> > device lpt # Printer
> > device plip # TCP/IP over parallel
> > device ppi # Parallel port interface device
> > #device vpo # Requires scbus and da
> >
> >
> > # PCI Ethernet NICs.
> > device de # DEC/Intel DC21x4x (``Tulip'')
> > device em # Intel PRO/1000 adapter Gigabit Ethernet
> > Card device txp # 3Com 3cR990 (``Typhoon'')
> > device vx # 3Com 3c590, 3c595 (``Vortex'')
> >
> > # PCI Ethernet NICs that use the common MII bus controller code.
> > # NOTE: Be sure to keep the 'device miibus' line in order to use these
> > NICs! device miibus # MII bus support
> > device dc # DEC/Intel 21143 and various workalikes
> > device fxp # Intel EtherExpress PRO/100B (82557,
> > 82558) device pcn # AMD Am79C97x PCI 10/100
> > (precedence over 'lnc') device rl # RealTek
> > 8129/8139
> > device sf # Adaptec AIC-6915 (``Starfire'')
> > device sis # Silicon Integrated Systems SiS 900/SiS
> > 7016 device sk # SysKonnect SK-984x and SK-982x
> > gigabit ethernet device ste # Sundance ST201 (D-Link
> > DFE-550TX) device ti # Alteon Networks Tigon I/II
> > gigabit ethernet device tl # Texas Instruments
> > ThunderLAN
> > device tx # SMC EtherPower II (83c170 ``EPIC'')
> > device vr # VIA Rhine, Rhine II
> > device wb # Winbond W89C840F
> > device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
> > device bge # Broadcom BCM570xx Gigabit Ethernet
> >
> > # ISA Ethernet NICs. pccard nics included.
> > device cs # Crystal Semiconductor CS89x0 NIC
> > # 'device ed' requires 'device miibus'>
> > device ed # NE[12]000, SMC Ultra, 3c503, DS8390
> > cards device ex # Intel EtherExpress Pro/10 and
> > Pro/10+ device ep # Etherlink III based cards
> > device fe # Fujitsu MB8696x based cards
> > device ie # EtherExpress 8/16, 3C507, StarLAN 10
> > etc. device lnc # NE2100, NE32-VL Lance Ethernet
> > cards device sn # SMC's 9000 series of ethernet
> > chips device xe # Xircom pccard ethernet
> >
> > # ISA devices that use the old ISA shims
> > #device le
> >
> > # Wireless NIC cards
> > device wlan # 802.11 support
> > device an # Aironet 4500/4800 802.11 wireless NICs.
> > device awi # BayStack 660 and others
> > device wi # WaveLAN/Intersil/Symbol 802.11 wireless
> > NICs. #device wl # Older non 802.11 Wavelan wireless
> > NIC.
> >
> > # Pseudo devices - the number indicates how many units to allocate.
> > device random # Entropy device
> > device loop # Network loopback
> > device ether # Ethernet support
> > device sl # Kernel SLIP
> > device ppp # Kernel PPP
> > device tun # Packet tunnel.
> > device pty # Pseudo-ttys (telnet etc)
> > device md # Memory "disks"
> > device gif # IPv6 and IPv4 tunneling
> > device faith # IPv6-to-IPv4 relaying (translation)
> >
> > # The `bpf' device enables the Berkeley Packet Filter.
> > # Be aware of the administrative consequences of enabling this!
> > device bpf # Berkeley packet filter
> >
> > # USB support
> > device uhci # UHCI PCI->USB interface
> > device ohci # OHCI PCI->USB interface
> > device usb # USB Bus (required)
> > #device udbp # USB Double Bulk Pipe devices
> > device ugen # Generic
> > device uhid # "Human Interface Devices"
> > device ukbd # Keyboard
> > device ulpt # Printer
> > device umass # Disks/Mass storage - Requires scbus and
> > da device ums # Mouse
> > device urio # Diamond Rio 500 MP3 player
> > device uscanner # Scanners
> > # USB Ethernet, requires mii
> > device aue # ADMtek USB ethernet
> > device axe # ASIX Electronics USB ethernet
> > device cue # CATC USB ethernet
> > device kue # Kawasaki LSI USB ethernet
> >
> > # FireWire support
> > device firewire # FireWire bus code
> > device sbp # SCSI over FireWire (Requires scbus and
> > da) device fwe # Ethernet over FireWire
> > (non-standard!) rain#
> >
> >
> >
> >
> >
> > Brian Duke
> > Level(3) Communication / TCAM
> > ' (720) 888-7797
> > p (877) 461-6217
> > * brian.duke at level3.com
> > =----=-=-=-=-=--==--==¬
>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe at freebsd.org"
--
Kent Stewart
Richland, WA
http://users.owt.com/kstewart/index.html
More information about the freebsd-questions
mailing list