Buildworld ERROR CODE 2
Duke, Brian
Brian.Duke at Level3.com
Mon Jun 16 21:02:37 PDT 2003
ok I didn't get an answer on my first email so I tried to do a complete buildworld
here is a transcript of the output:
ranlib libc_pic.a
ranlib libc_p.a
ranlib libc.a
install -C -C -o root -g wheel -m 444 libc.a /usr/obj/usr/src/i386/usr/lib
install -C -C -o root -g wheel -m 444 libc_p.a /usr/obj/usr/src/i386/usr/lib
install -C -s -o root -g wheel -m 444 libc.so.5 /usr/obj/usr/src/i386/usr/lib
ln -fs libc.so.5 /usr/obj/usr/src/i386/usr/lib/libc.so
install -C -o root -g wheel -m 444 libc_pic.a /usr/obj/usr/src/i386/usr/lib
1 error
*** Error code 2
1 error
*** Error code 2
1 error
*** Error code 2
I made only moderate changes to the make.conf...like my CPUBuild=i586.
I am in single user mode. Someone please help. I am NOT good enough to troubleshoot this.
> -----Original Message-----
> From: Duke, Brian
> Sent: Monday, June 16, 2003 2:57 AM
> To: 'freebsd-questions at freebsd.org'
> Subject: /usr/src/sys/dev/en/midway.c:1607: dereferencing pointer to incomplete type
>
> I cannot seem to rebuild my kernel. I wanted to get my sound card working so I included the "device pcm" directive in my kernel config and I got an error as below..
> I could use a hand here if somone has seen this kind of error.
> Here is the end of the output of the failed compile
> rain# cd /usr/src
> rain# make buildkernel KERNCONF=RAINBUILD
>
> error:
>
> ===> en
> cc -O -pipe -mcpu=pentiumpro -DENABLE_BPF -D_KERNEL -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-
> qual -fformat-extensions -std=c99 -DKLD_MODULE -nostdinc -I- -I. -I@ -I@/dev -I@/../include -fno-common -g -mno-align-long-strings -mpreferred-stack-boundary=2 -ffre
> estanding -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -std=c99 -c /usr/
> src/sys/pci/if_en_pci.c
> cc -O -pipe -mcpu=pentiumpro -DENABLE_BPF -D_KERNEL -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-
> qual -fformat-extensions -std=c99 -DKLD_MODULE -nostdinc -I- -I. -I@ -I@/dev -I@/../include -fno-common -g -mno-align-long-strings -mpreferred-stack-boundary=2 -ffre
> estanding -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -std=c99 -c /usr/
> src/sys/dev/en/midway.c
> /usr/src/sys/dev/en/midway.c: In function `en_get_vccs':
> /usr/src/sys/dev/en/midway.c:1474: dereferencing pointer to incomplete type
> /usr/src/sys/dev/en/midway.c:1474: dereferencing pointer to incomplete type
> /usr/src/sys/dev/en/midway.c:1479: dereferencing pointer to incomplete type
> /usr/src/sys/dev/en/midway.c:1480: dereferencing pointer to incomplete type
> /usr/src/sys/dev/en/midway.c:1488: dereferencing pointer to incomplete type
> /usr/src/sys/dev/en/midway.c:1492: dereferencing pointer to incomplete type
> /usr/src/sys/dev/en/midway.c:1493: dereferencing pointer to incomplete type
> /usr/src/sys/dev/en/midway.c:1493: `ATMIO_FLAG_PVC' undeclared (first use in this function)
> /usr/src/sys/dev/en/midway.c:1493: (Each undeclared identifier is reported only once
> /usr/src/sys/dev/en/midway.c:1493: for each function it appears in.)
> /usr/src/sys/dev/en/midway.c:1494: dereferencing pointer to incomplete type
> /usr/src/sys/dev/en/midway.c:1495: dereferencing pointer to incomplete type
> /usr/src/sys/dev/en/midway.c:1497: dereferencing pointer to incomplete type
> /usr/src/sys/dev/en/midway.c:1497: `ATMIO_AAL_5' undeclared (first use in this function)
> /usr/src/sys/dev/en/midway.c:1499: dereferencing pointer to incomplete type
> /usr/src/sys/dev/en/midway.c:1499: `ATMIO_AAL_0' undeclared (first use in this function)
> /usr/src/sys/dev/en/midway.c:1500: dereferencing pointer to incomplete type>
> /usr/src/sys/dev/en/midway.c:1500: `ATMIO_TRAFFIC_UBR' undeclared (first use in this function)
> /usr/src/sys/dev/en/midway.c:1501: dereferencing pointer to incomplete type
> /usr/src/sys/dev/en/midway.c:1502: increment of pointer to unknown structure
> /usr/src/sys/dev/en/midway.c:1502: arithmetic on pointer to an incomplete type
> /usr/src/sys/dev/en/midway.c: In function `en_ioctl':
> /usr/src/sys/dev/en/midway.c:1591: `SIOCATMGETVCCS' undeclared (first use in this function)
> /usr/src/sys/dev/en/midway.c:1600: `SIOCATMGVCCS' undeclared (first use in this function)
> /usr/src/sys/dev/en/midway.c:1606: dereferencing pointer to incomplete type
> /usr/src/sys/dev/en/midway.c:1607: dereferencing pointer to incomplete type
> /usr/src/sys/dev/en/midway.c:1607: dereferencing pointer to incomplete type
> *** Error code 1
>
> Stop in /usr/src/sys/modules/en.
> *** Error code 1
>
> Stop in /usr/src/sys/modules.
> *** Error code 1
>
> Stop in /usr/obj/usr/src/sys/RAINBUILD.
> *** Error code 1
>
> Stop in /usr/src.
> *** Error code 1
>
> Stop in /usr/src.
> rain#
>
> My FreeBSD version number
> 5.1 cvsup with new STANDARD-SUPFILE and PORTS-SUPFILE
>
>
> The contents of /var/run/dmesg/boot
> syncing disks, buffers remaining... 1 1
> done
> Uptime: 5h20m12s
> Rebooting...
> Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003
> root at wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0689000.
> Timecounter "i8254" frequency 1193182 Hz
> Timecounter "TSC" frequency 597405320 Hz
> CPU: Intel Pentium III (597.41-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x683 Stepping = 3
> Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
> real memory = 268435456 (256 MB)
> avail memory = 253681664 (241 MB)
> Pentium Pro MTRR support enabled
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcibios: BIOS version 2.10
> Using $PIR table, 9 entries at 0xc00ede10
> pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
> pci0: <PCI bus> on pcib0
> agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x44000000-0x47ffffff at device 0.0 on pci0
> pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x2000-0x203f mem 0x41100000-0x411fffff,0x41200000-0x41200fff irq 11 at device
> 18.0 on pci0
> fxp0: Ethernet address 00:d0:b7:52:e2:ef
> miibus0: <MII bus> on fxp0
> inphy0: <i82555 10/100 media interface> on miibus0
> inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> isab0: <PCI-ISA bridge> at device 20.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX4 UDMA33 controller> port 0x2060-0x206f at device 20.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2040-0x205f irq 11 at device 20.2 on pci0
> usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> pci0: <bridge, PCI-unknown> at device 20.3 (no driver attached)
> orm0: <Option ROMs> at iomem 0xe0000-0xe7fff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
> pmtimer0 on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model Generic PS/2 mouse, device ID 0
> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0>
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> unknown: <PNP0401> can't assign resources (port)
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0700> can't assign resources (port)
> unknown: <PNP0303> can't assign resources (port)
> unknown: <PNP0f13> can't assign resources (irq)
> unknown: <PNP0c02> can't assign resources (port)
> Timecounters tick every 10.000 msec
> ad0: 9541MB <Maxtor 51024U2> [19386/16/63] at ata0-master UDMA33
> acd0: DVD-ROM <MATSHITADVD-ROM SR-8583> at ata1-master PIO4
> Mounting root from ufs:/dev/ad0s1a
>
> The output of "uname -a "
> >rain# uname -a
> >FreeBSD rain.l3.com 5.1-RELEASE FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003 root at wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC i386
>
>
> The kernel config file
> rain# cat /root/kernels/RAINBUILD
> #
> # GENERIC -- Generic kernel configuration file for FreeBSD/i386
> #
> # For more information on this file, please read the handbook section on
> # Kernel Configuration Files:
> #
> # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
> #
> # The handbook is also available locally in /usr/share/doc/handbook
> # if you've installed the doc distribution, otherwise always see the
> # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
> # latest information.
> #
> # An exhaustive list of options and more detailed explanations of the
> # device lines is also present in the ../../conf/NOTES and NOTES files.
> # If you are in doubt as to the purpose or necessity of a line, check first
> # in NOTES.
> #
> # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.386 2003/06/08 02:03:01 jmallett Exp $
>
> machine i386
> cpu I486_CPU
> cpu I586_CPU
> cpu I686_CPU
> ident GENERIC
>
> #To statically compile in device wiring instead of /boot/device.hints
> #hints "GENERIC.hints" #Default places to look for devices.
>
> makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
>
> options SCHED_4BSD #4BSD scheduler
> options INET #InterNETworking
> options INET6 #IPv6 communications protocols
> options FFS #Berkeley Fast Filesystem
> options SOFTUPDATES #Enable FFS soft updates support
> options UFS_ACL #Support for access control lists
> options UFS_DIRHASH #Improve performance on big directories
> options MD_ROOT #MD is a potential root device
> options NFSCLIENT #Network Filesystem Client
> options NFSSERVER #Network Filesystem Server
> options NFS_ROOT #NFS usable as /, requires NFSCLIENT
> options MSDOSFS #MSDOS Filesystem
> options CD9660 #ISO 9660 Filesystem
> options PROCFS #Process filesystem (requires PSEUDOFS)
> options PSEUDOFS #Pseudo-filesystem framework
> options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
> options COMPAT_FREEBSD4 #Compatible with FreeBSD4>
> options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
> options KTRACE #ktrace(1) support
> options SYSVSHM #SYSV-style shared memory
> options SYSVMSG #SYSV-style message queues
> options SYSVSEM #SYSV-style semaphores
> options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
> options KBD_INSTALL_CDEV # install a CDEV entry in /dev
> options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
> # output. Adds ~128k to driver.
> options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
> # output. Adds ~215k to driver.
>
> # Debugging for use in -current
> options DDB #Enable the kernel debugger
> options INVARIANTS #Enable calls of extra sanity checking
> options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS
> options WITNESS #Enable checks to detect deadlocks and cycles
> options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
>
> # To make an SMP kernel, the next two are needed
> #options SMP # Symmetric MultiProcessor Kernel
> #options APIC_IO # Symmetric (APIC) I/O
>
> device isa
> device eisa
> device pci
> device pcm
>
> # Floppy drives
> device fdc
>
> # ATA and ATAPI devices
> device ata
> device atadisk # ATA disk drives
> device atapicd # ATAPI CDROM drives
> device atapifd # ATAPI floppy drives
> device atapist # ATAPI tape drives
> options ATA_STATIC_ID #Static device numbering
>
> # SCSI Controllers
> device ahb # EISA AHA1742 family
> device ahc # AHA2940 and onboard AIC7xxx devices
> device ahd # AHA39320/29320 and onboard AIC79xx devices
> device amd # AMD 53C974 (Tekram DC-390(T))
> device isp # Qlogic family
> device mpt # LSI-Logic MPT-Fusion
> #device ncr # NCR/Symbios Logic
> device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
> device trm # Tekram DC395U/UW/F DC315U adapters
>
> device adv # Advansys SCSI adapters
> device adw # Advansys wide SCSI adapters
> device aha # Adaptec 154x SCSI adapters
> device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
> device bt # Buslogic/Mylex MultiMaster SCSI adapters
>
> device ncv # NCR 53C500
> device nsp # Workbit Ninja SCSI-3
> device stg # TMC 18C30/18C50
>
> # RAID controllers interfaced to the SCSI subsystem
> device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
> device ciss # Compaq Smart RAID 5*
> device dpt # DPT Smartcache III, IV - See NOTES for options!
> device iir # Intel Integrated RAID
> device mly # Mylex AcceleRAID/eXtremeRAID
>
> # SCSI peripherals
> device scbus # SCSI bus (required for SCSI)
> device ch # SCSI media changers
> device da # Direct Access (disks)
> device sa # Sequential Access (tape etc)
> device cd # CD
> device pass # Passthrough device (direct SCSI access)
> device ses # SCSI Environmental Services (and SAF-TE)>
>
> # RAID controllers
> device aac # Adaptec FSA RAID
> device aacp # SCSI passthrough for aac (requires CAM)
> device amr # AMI MegaRAID
> device ida # Compaq Smart RAID
> device ips # IBM (Adaptec) ServeRAID
> device mlx # Mylex DAC960 family
> device pst # Promise Supertrak SX6000
> device twe # 3ware ATA RAID
>
> # atkbdc0 controls both the keyboard and the PS/2 mouse
> device atkbdc # AT keyboard controller
> device atkbd # AT keyboard
> device psm # PS/2 mouse
>
> device vga # VGA video card driver
>
> device splash # Splash screen and screen saver support
>
> # syscons is the default console driver, resembling an SCO console
> device sc
>
> # Enable this for the pcvt (VT220 compatible) console driver
> #device vt
> #options XSERVER # support for X server on a vt console
> #options FAT_CURSOR # start with block cursor
>
> device agp # support several AGP chipsets
>
> # Floating point support - do not disable.
> device npx
>
> # Power management support (see NOTES for more options)
> #device apm
> # Add suspend/resume support for the i8254.
> device pmtimer
>
> # PCCARD (PCMCIA) support
> # Pcmcia and cardbus bridge support
> device cbb # cardbus (yenta) bridge
> #device pcic # ExCA ISA and PCI bridges
> device pccard # PC Card (16-bit) bus
> device cardbus # CardBus (32-bit) bus
>
> # Serial (COM) ports
> device sio # 8250, 16[45]50 based serial ports
>
> # Parallel port
> device ppc
> device ppbus # Parallel port bus (required)
> device lpt # Printer
> device plip # TCP/IP over parallel
> device ppi # Parallel port interface device
> #device vpo # Requires scbus and da
>
>
> # PCI Ethernet NICs.
> device de # DEC/Intel DC21x4x (``Tulip'')
> device em # Intel PRO/1000 adapter Gigabit Ethernet Card
> device txp # 3Com 3cR990 (``Typhoon'')
> device vx # 3Com 3c590, 3c595 (``Vortex'')
>
> # PCI Ethernet NICs that use the common MII bus controller code.
> # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
> device miibus # MII bus support
> device dc # DEC/Intel 21143 and various workalikes
> device fxp # Intel EtherExpress PRO/100B (82557, 82558)
> device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
> device rl # RealTek 8129/8139
> device sf # Adaptec AIC-6915 (``Starfire'')
> device sis # Silicon Integrated Systems SiS 900/SiS 7016
> device sk # SysKonnect SK-984x and SK-982x gigabit ethernet
> device ste # Sundance ST201 (D-Link DFE-550TX)
> device ti # Alteon Networks Tigon I/II gigabit ethernet
> device tl # Texas Instruments ThunderLAN
> device tx # SMC EtherPower II (83c170 ``EPIC'')
> device vr # VIA Rhine, Rhine II
> device wb # Winbond W89C840F
> device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
> device bge # Broadcom BCM570xx Gigabit Ethernet
>
> # ISA Ethernet NICs. pccard nics included.
> device cs # Crystal Semiconductor CS89x0 NIC
> # 'device ed' requires 'device miibus'>
> device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
> device ex # Intel EtherExpress Pro/10 and Pro/10+
> device ep # Etherlink III based cards
> device fe # Fujitsu MB8696x based cards
> device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
> device lnc # NE2100, NE32-VL Lance Ethernet cards
> device sn # SMC's 9000 series of ethernet chips
> device xe # Xircom pccard ethernet
>
> # ISA devices that use the old ISA shims
> #device le
>
> # Wireless NIC cards
> device wlan # 802.11 support
> device an # Aironet 4500/4800 802.11 wireless NICs.
> device awi # BayStack 660 and others
> device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
> #device wl # Older non 802.11 Wavelan wireless NIC.
>
> # Pseudo devices - the number indicates how many units to allocate.
> device random # Entropy device
> device loop # Network loopback
> device ether # Ethernet support
> device sl # Kernel SLIP
> device ppp # Kernel PPP
> device tun # Packet tunnel.
> device pty # Pseudo-ttys (telnet etc)
> device md # Memory "disks"
> device gif # IPv6 and IPv4 tunneling
> device faith # IPv6-to-IPv4 relaying (translation)
>
> # The `bpf' device enables the Berkeley Packet Filter.
> # Be aware of the administrative consequences of enabling this!
> device bpf # Berkeley packet filter
>
> # USB support
> device uhci # UHCI PCI->USB interface
> device ohci # OHCI PCI->USB interface
> device usb # USB Bus (required)
> #device udbp # USB Double Bulk Pipe devices
> device ugen # Generic
> device uhid # "Human Interface Devices"
> device ukbd # Keyboard
> device ulpt # Printer
> device umass # Disks/Mass storage - Requires scbus and da
> device ums # Mouse
> device urio # Diamond Rio 500 MP3 player
> device uscanner # Scanners
> # USB Ethernet, requires mii
> device aue # ADMtek USB ethernet
> device axe # ASIX Electronics USB ethernet
> device cue # CATC USB ethernet
> device kue # Kawasaki LSI USB ethernet
>
> # FireWire support
> device firewire # FireWire bus code
> device sbp # SCSI over FireWire (Requires scbus and da)
> device fwe # Ethernet over FireWire (non-standard!)
> rain#
>
>
>
>
>
> Brian Duke
> Level(3) Communication / TCAM
> ' (720) 888-7797
> p (877) 461-6217
> * brian.duke at level3.com
> =----=-=-=-=-=--==--==¬
>
>
>
More information about the freebsd-questions
mailing list