problems with UDMA modes

[Alexander Stepanenko]

Thanx for the quick answer Joshua. But I have the only device on this
channel. And my HDD is of ATA-100 type. So... :(((

----- Original Message -----
From: "Joshua Lokken" <joshua at joshualokken.com>
To: "Alexander Stepanenko" <alexander.stepanenko at kuehne-nagel.com>
Cc: <freebsd-questions at freebsd.org>
Sent: Friday, April 25, 2003 9:24 AM
Subject: Re: problems with UDMA modes


> * Alexander Stepanenko (alexander.stepanenko at kuehne-nagel.com) wrote:
> ==> Hi. I have VIA kt400 chipset (IDE controller VIA 8235, supports up to
> ==> UDMA133) and Seagate HDD (ATA-100). I'm use 80-pin cable. My BIOS
configured
> ==> properly.
> ==> But my FreeBSD 5.0 set UDMA33 mode. I tried to use atacontrol, but
only
> ==> UDMA33 mode can be set. Who can help me?
> ==>
>
> I don't know about 5.0.  When I've had this problem in the past,
> it was because I had a non-ATA-100 device as a slave on that
> channel.
>
> --
> Joshua
>
> "When I graduate, I am so outta here!"   -- Homer Simpson
>
>