[pf4freebsd] Re: Bridging?

Brandon Weisz brandon at mail.avioc.org
Wed Sep 15 20:47:40 PDT 2004


Max,
I tested your patch with basically the same setup as Alan.  I'm using
the pf port, not sure if I should be testing with 1.62.

The quick and dirty is I didn't see any of the debug messages from
bridge.c.diff in the dmesg.

The results(?) along with my setup are attached.

labrat# uname -a FreeBSD labrat.internal.avioc.org 5.1-RELEASE-p2
FreeBSD 5.1-RELEASE-p2 #1: Sun Aug 31 22:14:14 CDT 2003    
root at labrat.internal.avioc.org:/usr/obj/usr/src/sys/CORE-L  i386

labrat# sysctl -a | grep bridge
net.link.ether.bridge_cfg: xl0,xl1
net.link.ether.bridge: 1
net.link.ether.bridge_ipfw: 0
net.link.ether.bridge_ipf: 1
net.link.ether.bridge_ipfw_drop: 0
net.link.ether.bridge_ipfw_collisions: 0

labrat# cat /usr/local/etc/pf.conf
set loginterface xl0
#pass in all
#pass out all
block log



Regards,

Brandon

On Wed, 2003-08-27 at 19:20, Max Laier wrote:
> DAMN IT ... what is this ... your mailserver won't let me send plain-text
> *.diff and tells me to "zip" and doesn't accept zip either ...
> 
> find the patch at: http://pf4freebsd.love2party.net/bridge.c.diff
> 
> 
> > > OK - send away.  Anything I can do to help.  I have tons of time and
> > really
> > > need to get this working ASAP.
> >
> > First off, if that's true you better go install OpenBSD or learn what ipfw
> > can do for you. I don't think that we will have it working too soon. If
> you
> > are still interested in testing:
> >
> > The attchment is a really noisy patch against sys/net/bridge.c
> > Apply it, rebuild your kernel and generate traffic without pf module
> loaded.
> > $dmesg -a >file.pfoff
> > load pf and enable it and generate some traffic
> > $dmesg -a >file.pfon
> > unload pf and generate some traffic
> > $dmesg -a >file.pfoffagain
> > and send my the output files.
> >
> > That's all for the start.
> >
> > Regards,
> >     Max
> >
> 
> 


-- Attached file included as plaintext by Ecartis --
-- File: dmesg.pfoff

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE-p2 #1: Sun Aug 31 22:14:14 CDT 2003
    root at labrat.internal.avioc.org:/usr/obj/usr/src/sys/CORE-L
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06df000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06df1f4.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 451024650 Hz
CPU: AMD-K6(tm) 3D processor (451.02-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x58c  Stepping = 12
  Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
  AMD Features=0x80000800<SYSCALL,3DNow!>
real memory  = 402587648 (383 MB)
avail memory = 383578112 (365 MB)
K6-family MTRR support enabled (2 registers)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <UNICOR AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00fdf00
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe"  frequency 3579545 Hz
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x4d6,0x40b,0x480-0x48f,0x5000-0x501f,0x4000-0x403f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Ali M1541 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xe9006000-0xe900607f irq 5 at device 9.0 on pci0
xl0: Ethernet address: 00:50:da:c6:d6:f7
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: <3Com 3c905B-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xe9005000-0xe900507f irq 10 at device 10.0 on pci0
xl1: Ethernet address: 00:50:04:d2:26:a1
miibus1: <MII bus> on xl1
bmtphy0: <3c905B 10/100 internal PHY> on miibus1
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <Promise PDC20268 UDMA100 controller> port 0xe800-0xe80f,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd807 mem 0xe9000000-0xe9003fff irq 11 at device 11.0 on pci0
ata2: at 0xd800 on atapci0
ata3: at 0xe000 on atapci0
atapci1: <AcerLabs Aladdin UDMA33 controller> port 0xec00-0xec0f at device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
orm0: <Option ROMs> at iomem 0xcd000-0xcf7ff,0xcc000-0xcc7ff,0xc0000-0xcafff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
BRIDGE 020214 loaded
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ad4: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata2-master UDMA100
acd0: CDROM <LTN483L> at ata0-master PIO4
Mounting root from ufs:/dev/ad4s1a


-- Attached file included as plaintext by Ecartis --
-- File: dmesg.pfoff2

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE-p2 #1: Sun Aug 31 22:14:14 CDT 2003
    root at labrat.internal.avioc.org:/usr/obj/usr/src/sys/CORE-L
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06df000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06df1f4.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 451024650 Hz
CPU: AMD-K6(tm) 3D processor (451.02-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x58c  Stepping = 12
  Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
  AMD Features=0x80000800<SYSCALL,3DNow!>
real memory  = 402587648 (383 MB)
avail memory = 383578112 (365 MB)
K6-family MTRR support enabled (2 registers)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <UNICOR AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00fdf00
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe"  frequency 3579545 Hz
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x4d6,0x40b,0x480-0x48f,0x5000-0x501f,0x4000-0x403f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Ali M1541 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xe9006000-0xe900607f irq 5 at device 9.0 on pci0
xl0: Ethernet address: 00:50:da:c6:d6:f7
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: <3Com 3c905B-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xe9005000-0xe900507f irq 10 at device 10.0 on pci0
xl1: Ethernet address: 00:50:04:d2:26:a1
miibus1: <MII bus> on xl1
bmtphy0: <3c905B 10/100 internal PHY> on miibus1
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <Promise PDC20268 UDMA100 controller> port 0xe800-0xe80f,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd807 mem 0xe9000000-0xe9003fff irq 11 at device 11.0 on pci0
ata2: at 0xd800 on atapci0
ata3: at 0xe000 on atapci0
atapci1: <AcerLabs Aladdin UDMA33 controller> port 0xec00-0xec0f at device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
orm0: <Option ROMs> at iomem 0xcd000-0xcf7ff,0xcc000-0xcc7ff,0xc0000-0xcafff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
BRIDGE 020214 loaded
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ad4: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata2-master UDMA100
acd0: CDROM <LTN483L> at ata0-master PIO4
Mounting root from ufs:/dev/ad4s1a
in6_ifattach: pflog0 is not multicast capable, IPv6 not enabled
in6_ifattach: pfsync0 is not multicast capable, IPv6 not enabled
pflog0: promiscuous mode enabled
pflog0: promiscuous mode disabled


-- Attached file included as plaintext by Ecartis --
-- File: dmesg.pfon

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE-p2 #1: Sun Aug 31 22:14:14 CDT 2003
    root at labrat.internal.avioc.org:/usr/obj/usr/src/sys/CORE-L
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06df000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06df1f4.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 451024650 Hz
CPU: AMD-K6(tm) 3D processor (451.02-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x58c  Stepping = 12
  Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
  AMD Features=0x80000800<SYSCALL,3DNow!>
real memory  = 402587648 (383 MB)
avail memory = 383578112 (365 MB)
K6-family MTRR support enabled (2 registers)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <UNICOR AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00fdf00
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe"  frequency 3579545 Hz
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x4d6,0x40b,0x480-0x48f,0x5000-0x501f,0x4000-0x403f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Ali M1541 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xe9006000-0xe900607f irq 5 at device 9.0 on pci0
xl0: Ethernet address: 00:50:da:c6:d6:f7
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: <3Com 3c905B-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xe9005000-0xe900507f irq 10 at device 10.0 on pci0
xl1: Ethernet address: 00:50:04:d2:26:a1
miibus1: <MII bus> on xl1
bmtphy0: <3c905B 10/100 internal PHY> on miibus1
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <Promise PDC20268 UDMA100 controller> port 0xe800-0xe80f,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd807 mem 0xe9000000-0xe9003fff irq 11 at device 11.0 on pci0
ata2: at 0xd800 on atapci0
ata3: at 0xe000 on atapci0
atapci1: <AcerLabs Aladdin UDMA33 controller> port 0xec00-0xec0f at device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
orm0: <Option ROMs> at iomem 0xcd000-0xcf7ff,0xcc000-0xcc7ff,0xc0000-0xcafff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
BRIDGE 020214 loaded
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ad4: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata2-master UDMA100
acd0: CDROM <LTN483L> at ata0-master PIO4
Mounting root from ufs:/dev/ad4s1a
in6_ifattach: pflog0 is not multicast capable, IPv6 not enabled
in6_ifattach: pfsync0 is not multicast capable, IPv6 not enabled
pflog0: promiscuous mode enabled






More information about the freebsd-pf mailing list