Tyan Tiget S5351-i7322 hangs with ACPI (AMD64 or i386)

[John Baldwin]

On Friday 02 December 2005 01:40 pm, Robert Faulds wrote:
> FreeBSD-AMD64 (Same behavior with i386)
> Tyan S5351 dual XEON
> 4GB RAM
>
> I can not boot this motherboard with acpi enabled. It consistently
> times-out while trying to attach disks to the controller. The stock
> controller is a LSI 1030 but with an Adaptec 2130SLP it hangs in the
> same place.
>
> I've tried 6.0-RELEASE, 6.0-STABLE(from Tuesday), and 5.4-STABLE with
> and without drives attached to the controllers. All exhibit the same
> behavior.
> I've posted a few dmesg's of various sorts. I'm currently building a
> kernel with ACPI-DEBUG an will post the results shortly. Any help is
> greatly appreciated.
>
>
> http://xocolatl.com/rfaulds/freebsd-acpi

Well, one thing to note is that with ACPI you have APIC, but without ACPI you 
do not.  Can you try just booting ACPI with APIC disabled 
(hint.apic.0.disabled=1) to see if that fares better?  You'll probably need 
to do that with a FreeBSD/i386 kernel for now.

-- 
John Baldwin <jhb at FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve"  =  http://www.FreeBSD.org