Tyan Tiget S5351-i7322 hangs with ACPI (AMD64 or i386)
Robert Faulds
Robert.Faulds at voxify.com
Fri Dec 2 21:59:25 GMT 2005
That does indeed allow me to boot 6.0-RELEASE-x86
http://xocolatl.com/rfaulds/freebsd-acpi/test1-dmesg-no-apic-verbose
Bad assumption on my part that
root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC and
/sys/i386/conf/GENERIC were the same. Or is it loader.conf on the
release ISO that is different.
Doesn't a lack of APIC preclude running SMP? Can you suggest next steps
for me, please?
Robert
-----Original Message-----
From: John Baldwin [mailto:jhb at freebsd.org]
Sent: Friday, December 02, 2005 1:13 PM
To: freebsd-acpi at freebsd.org
Cc: Robert Faulds
Subject: Re: Tyan Tiget S5351-i7322 hangs with ACPI (AMD64 or i386)
On Friday 02 December 2005 01:40 pm, Robert Faulds wrote:
> FreeBSD-AMD64 (Same behavior with i386)
> Tyan S5351 dual XEON
> 4GB RAM
>
> I can not boot this motherboard with acpi enabled. It consistently
> times-out while trying to attach disks to the controller. The stock
> controller is a LSI 1030 but with an Adaptec 2130SLP it hangs in the
> same place.
>
> I've tried 6.0-RELEASE, 6.0-STABLE(from Tuesday), and 5.4-STABLE with
> and without drives attached to the controllers. All exhibit the same
> behavior.
> I've posted a few dmesg's of various sorts. I'm currently building a
> kernel with ACPI-DEBUG an will post the results shortly. Any help is
> greatly appreciated.
>
>
> http://xocolatl.com/rfaulds/freebsd-acpi
Well, one thing to note is that with ACPI you have APIC, but without
ACPI you
do not. Can you try just booting ACPI with APIC disabled
(hint.apic.0.disabled=1) to see if that fares better? You'll probably
need
to do that with a FreeBSD/i386 kernel for now.
--
John Baldwin <jhb at FreeBSD.org> <>< http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve" = http://www.FreeBSD.org
More information about the freebsd-acpi
mailing list