Re: How to boot FreeBSD installed on the sd card on the Khadas Edge-V instead of Android

Hello Klaus,

Thanks for your help.

I would like to inform you that your help hasn't been able to help me to
make any progress. Sorry to tell you this,but this is the truth. You have
been too generic for my level of knowledge.
If you want to really help me,try to be more specific.

Very thanks.

On Sun, Jul 6, 2025 at 9:52 PM Klaus Küchemann <maciphone2@googlemail.com>
wrote:

> Here's roughly how it works:
>
> follow the instructions of your vendor to get into Mask Mode
> 1. Delete the SPI flash or install the u-boot port on it. (Instructions in
> the pkg description)
> 2. Delete the emmc or install FreeBSD on it.
> -- In short: if you have the u-boot port flashed onto the SPI, deleted the
> emmc, and FreeBSD on the uSD, FreeBSD will boot.
>
> --
> I don't own a Khadas board and don't want to destroy yours,
> so I don't want to reveal the trick for shorting the SPI pins to interrupt
> detection during boot :-)
>
> Have fun
>
>
>
> > Am 06.07.2025 um 14:40 schrieb Mario Marietto <marietto2008@gmail.com>:
> > Khadas Edge-V
>


-- 
Mario.