Re: How to boot FreeBSD installed on the sd card on the Khadas Edge-V instead of Android
Date: Sun, 06 Jul 2025 20:08:43 UTC
It happens mostly because the necessary source of informations that could help me to make progress don't work on the khadas website : 1) https://dl.khadas.com/Firmware/Krescue/system/ : broken 2) docs.khadas.com : broken 3) https://youtu.be/ml2e6w8msfk : broken --> follow the instructions of your vendor to get into Mask Mode : where ? --> 1. Delete the SPI flash or install the u-boot port on it. (Instructions in the pkg description) : where ? --> 2. Delete the emmc or install FreeBSD on it : no idea about how to do this --> In short: if you have the u-boot port flashed onto the SPI, deleted the emmc, and FreeBSD on the uSD, FreeBSD will boot : too generic. --> so I don't want to reveal the trick for shorting the SPI pins to interrupt detection during boot. If it is about to touch some pins with a tweezer, I will not do it. I see different methods to achieve this result. Why have you suggested the most dangerous for a newbie ? On Sun, Jul 6, 2025 at 9:59 PM Mario Marietto <marietto2008@gmail.com> wrote: > Hello Klaus, > > Thanks for your help. > > I would like to inform you that your help hasn't been able to help me to > make any progress. Sorry to tell you this,but this is the truth. You have > been too generic for my level of knowledge. > If you want to really help me,try to be more specific. > > Very thanks. > > On Sun, Jul 6, 2025 at 9:52 PM Klaus Küchemann <maciphone2@googlemail.com> > wrote: > >> Here's roughly how it works: >> >> follow the instructions of your vendor to get into Mask Mode >> 1. Delete the SPI flash or install the u-boot port on it. (Instructions >> in the pkg description) >> 2. Delete the emmc or install FreeBSD on it. >> -- In short: if you have the u-boot port flashed onto the SPI, deleted >> the emmc, and FreeBSD on the uSD, FreeBSD will boot. >> >> -- >> I don't own a Khadas board and don't want to destroy yours, >> so I don't want to reveal the trick for shorting the SPI pins to >> interrupt detection during boot :-) >> >> Have fun >> >> >> >> > Am 06.07.2025 um 14:40 schrieb Mario Marietto <marietto2008@gmail.com>: >> > Khadas Edge-V >> > > > -- > Mario. > -- Mario.