Re: How to boot FreeBSD installed on the sd card on the Khadas Edge-V instead of Android

Here's roughly how it works:

follow the instructions of your vendor to get into Mask Mode
1. Delete the SPI flash or install the u-boot port on it. (Instructions in the pkg description)
2. Delete the emmc or install FreeBSD on it.
-- In short: if you have the u-boot port flashed onto the SPI, deleted the emmc, and FreeBSD on the uSD, FreeBSD will boot.

--
I don't own a Khadas board and don't want to destroy yours, 
so I don't want to reveal the trick for shorting the SPI pins to interrupt detection during boot :-)

Have fun



> Am 06.07.2025 um 14:40 schrieb Mario Marietto <marietto2008@gmail.com>:
> Khadas Edge-V