FreeBSD-stable-15-amd64-test - Build #50 - Still Failing
Date: Fri, 10 Oct 2025 22:41:03 UTC
FreeBSD-stable-15-amd64-test - Build #50 (8a0cdfc5a58d75272ec98a14c9cc7469db6b51f0) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/50/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/50/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/50/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
No changes
The end of the build log:
[...truncated 3.89 MiB...]
epair0b: Ethernet address: 82:70:36:fb:c4:7c
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: f2:75:7c:16:15:76
epair1b: Ethernet address: ae:b1:47:1f:f7:fc
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.167s]
sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: 46:58:0d:85:d7:0c
epair0b: Ethernet address: ea:ac:37:1e:f8:df
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ba:99:4b:d1:8e:ea
epair1b: Ethernet address: 1e:c5:e0:31:fc:69
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.137s]
sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: 86:8d:f7:95:96:a1
epair0b: Ethernet address: 36:96:85:1a:63:d8
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: fa:03:54:ac:b4:3d
epair1b: Ethernet address: be:21:89:ea:df:9d
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.138s]
sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: 0a:ee:b5:ed:e3:7e
epair0b: Ethernet address: 92:8c:69:e8:f3:51
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: f2:05:ee:28:00:fe
epair1b: Ethernet address: c6:8a:b2:7a:a9:c8
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.128s]
sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: 9e:50:6b:46:e3:09
epair0b: Ethernet address: 66:df:f7:64:e4:de
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 4e:f3:9c:23:a7:af
epair1b: Ethernet address: 4e:af:f9:5e:b9:0e
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.136s]
sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: fa:04:cc:80:17:ca
epair0b: Ethernet address: d2:c3:92:1f:e2:ee
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 06:d0:18:43:16:46
epair1b: Ethernet address: 06:85:18:02:89:5b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.187s]
sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: 02:39:8a:1c:02:92
epair0b: Ethernet address: 1a:cb:6a:6a:df:67
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 22:bf:c5:79:aa:fe
epair1b: Ethernet address: fe:42:0c:50:94:44
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.136s]
sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: 6a:b0:4e:36:20:06
epair0b: Ethernet address: 8e:c9:14:da:91:0c
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 1e:6b:1f:55:c4:c9
epair1b: Ethernet address: da:46:26:94:e6:eb
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.147s]
sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: 1a:33:1f:dc:4b:38
epair0b: Ethernet address: 06:3d:8c:da:4a:f0
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 4a:f3:db:42:a7:c8
epair1b: Ethernet address: e6:ab:92:69:f1:8d
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: da:40:61:7c:fa:b1
epair2b: Ethernet address: 72:f7:ec:9b:bf:a7
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.236s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: 22:97:f9:33:03:e0
epair0b: Ethernet address: ba:53:74:c2:e0:83
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 2a:20:57:81:ee:54
epair1b: Ethernet address: 7a:77:20:4c:8b:09
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 52:bb:20:96:c5:95
epair2b: Ethernet address: 1a:88:f4:0e:cb:9b
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [5.011s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: a2:76:86:d2:89:b6
epair0b: Ethernet address: 0a:ff:be:da:de:b2
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ae:b9:e1:f5:04:58
epair1b: Ethernet address: 66:06:db:ec:75:06
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: e6:f5:ec:2e:6c:ca
epair2b: Ethernet address: c2:0a:0e:12:4e:ae
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address = 0x18
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80c0f132
stack pointer = 0x28:0xfffffe008aef2980
frame pointer = 0x28:0xfffffe008aef29c0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (swi1: netisr 0)
rdi: fffffe008aef29d8 rsi: fffff801cbe6f396 rdx: 00000000ffffffff
rcx: 0000000000008466 r8: fffffe008aef2900 r9: 0000000000000003
rax: 0000000000000000 rbx: 0000000000000000 rbp: fffffe008aef29c0
r10: 0000000000000001 r11: 0000000000000000 r12: 0000000000000000
r13: 000000000000000b r14: 000000000000000b r15: 00000000000001f5
trap number = 12
panic: page fault
cpuid = 1
time = 1760136039
KDB: stack backtrace:
#0 0xffffffff80bc033d at kdb_backtrace+0x5d
#1 0xffffffff80b73726 at vpanic+0x136
#2 0xffffffff80b735e3 at panic+0x43
#3 0xffffffff8107bf69 at trap_pfault+0x3c9
#4 0xffffffff81051b88 at calltrap+0x8
#5 0xffffffff80d84af9 at in6_cksum_partial_l2+0x109
#6 0xffffffff8295cab5 at fr_cksum+0xa5
#7 0xffffffff829621dd at ipf_checkl4sum+0xbd
#8 0xffffffff829586f6 at ipf_checkv6sum+0x56
#9 0xffffffff8295a601 at ipf_makefrip+0x1691
#10 0xffffffff8295b6de at ipf_check+0x15e
#11 0xffffffff82958c28 at ipf_check_wrapper6+0x58
#12 0xffffffff80cc3438 at pfil_mbuf_in+0x38
#13 0xffffffff80d92b74 at ip6_input+0x484
#14 0xffffffff80cc0c98 at swi_net+0x128
#15 0xffffffff80b2d359 at ithread_loop+0x239
#16 0xffffffff80b298eb at fork_exit+0x7b
#17 0xffffffff81052bae at fork_trampoline+0xe
Uptime: 1h13m59s
Automatic reboot in 15 seconds - press a key on the console to abort
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-15-amd64-50' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-zfs-tests.sh
x ./auto-shutdown
x ./disable-notyet-tests.sh
x ./run-kyua.sh
x ./run.sh
x ./disable-dtrace-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-15-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-15-amd64-test] $ /bin/sh -xe /tmp/jenkins8496044004830523771.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-15-amd64-test', 'commit': '8a0cdfc5a58d75272ec98a14c9cc7469db6b51f0', 'branch': 'stable-15', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-15/latest_tested/amd64/amd64 -> ../../8a0cdfc5a58d75272ec98a14c9cc7469db6b51f0/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address