FreeBSD-stable-15-amd64-test - Build #49 - Still Failing
Date: Fri, 10 Oct 2025 21:25:30 UTC
FreeBSD-stable-15-amd64-test - Build #49 (8a0cdfc5a58d75272ec98a14c9cc7469db6b51f0) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/49/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/49/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/49/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
59f602e2f229fb20c6da7675db98e92c72ac2591 by olce:
getgroups.2: Simplifications; Be clearer on programs to be modified
8a0cdfc5a58d75272ec98a14c9cc7469db6b51f0 by kevans:
build: fix ordering of pkgbase targets to get a dtb package reliably
The end of the build log:
[...truncated 4.07 MiB...]
epair0b: Ethernet address: 86:1e:c9:78:86:61
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: b6:c4:1d:06:89:47
epair1b: Ethernet address: 2a:86:21:14:0a:0f
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.145s]
sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: be:e9:e7:82:20:c9
epair0b: Ethernet address: b2:b2:fb:64:5c:39
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 12:60:f8:41:20:81
epair1b: Ethernet address: ce:e9:df:ff:73:91
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.138s]
sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: 46:fa:f4:3c:4e:f0
epair0b: Ethernet address: f2:09:97:3d:c5:4f
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 52:a6:23:3d:88:e7
epair1b: Ethernet address: 1e:d9:f6:65:49:66
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.174s]
sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: d6:4a:ac:cf:4a:6b
epair0b: Ethernet address: c2:e4:5e:26:38:43
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: aa:f6:9d:67:b1:62
epair1b: Ethernet address: 4a:32:20:1a:76:d8
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.136s]
sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: a2:2a:08:e2:21:2b
epair0b: Ethernet address: 0a:fb:c6:eb:63:67
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: c6:de:3f:db:5d:20
epair1b: Ethernet address: 7a:71:ad:aa:82:ef
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.178s]
sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: b6:fb:19:28:ee:ee
epair0b: Ethernet address: ae:1e:96:a6:6b:bc
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 6e:32:66:b5:7d:4f
epair1b: Ethernet address: f2:09:de:30:f6:83
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.136s]
sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: e2:56:c9:22:04:bc
epair0b: Ethernet address: 5a:7a:3b:1d:b8:f4
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 62:67:43:ee:a5:6b
epair1b: Ethernet address: 56:2a:5a:4f:0a:58
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.135s]
sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: ae:6c:dd:1e:2d:50
epair0b: Ethernet address: ba:18:3e:2d:5e:57
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ca:c0:fe:69:72:ca
epair1b: Ethernet address: de:73:fe:eb:fd:2c
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.137s]
sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: 06:90:4b:70:99:69
epair0b: Ethernet address: 86:72:0c:2a:74:8b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 4a:f8:59:30:49:ef
epair1b: Ethernet address: ae:3f:7f:fe:66:05
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: f2:ef:62:27:10:33
epair2b: Ethernet address: d6:9b:10:e3:c9:3d
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.238s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: 82:a2:cb:f3:ec:8a
epair0b: Ethernet address: c6:d8:d0:af:07:9c
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 4a:e2:35:7e:b7:53
epair1b: Ethernet address: 0e:da:44:16:bb:83
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: a6:e4:96:82:43:6c
epair2b: Ethernet address: 16:32:e3:fc:89:97
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [4.736s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: 2e:24:a8:af:76:32
epair0b: Ethernet address: 8e:3e:ec:2a:eb:a9
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 72:85:b4:62:50:b4
epair1b: Ethernet address: 8e:b3:a3:2d:69:15
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: ca:42:77:75:a8:23
epair2b: Ethernet address: 66:d5:7e:c3:04:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x18
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80c0f132
stack pointer = 0x28:0xfffffe008aef2980
frame pointer = 0x28:0xfffffe008aef29c0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (swi1: netisr 0)
rdi: fffffe008aef29d8 rsi: fffff80151f65c96 rdx: 00000000ffffffff
rcx: 0000000000008466 r8: fffffe008aef2900 r9: 0000000000000003
rax: 0000000000000000 rbx: 0000000000000000 rbp: fffffe008aef29c0
r10: 0000000000000001 r11: 0000000000000000 r12: 0000000000000000
r13: 000000000000000b r14: 000000000000000b r15: 00000000000001f5
trap number = 12
panic: page fault
cpuid = 0
time = 1760131514
KDB: stack backtrace:
#0 0xffffffff80bc033d at kdb_backtrace+0x5d
#1 0xffffffff80b73726 at vpanic+0x136
#2 0xffffffff80b735e3 at panic+0x43
#3 0xffffffff8107bf69 at trap_pfault+0x3c9
#4 0xffffffff81051b88 at calltrap+0x8
#5 0xffffffff80d84af9 at in6_cksum_partial_l2+0x109
#6 0xffffffff8295cab5 at fr_cksum+0xa5
#7 0xffffffff829621dd at ipf_checkl4sum+0xbd
#8 0xffffffff829586f6 at ipf_checkv6sum+0x56
#9 0xffffffff8295a601 at ipf_makefrip+0x1691
#10 0xffffffff8295b6de at ipf_check+0x15e
#11 0xffffffff82958c28 at ipf_check_wrapper6+0x58
#12 0xffffffff80cc3438 at pfil_mbuf_in+0x38
#13 0xffffffff80d92b74 at ip6_input+0x484
#14 0xffffffff80cc0c98 at swi_net+0x128
#15 0xffffffff80b2d359 at ithread_loop+0x239
#16 0xffffffff80b298eb at fork_exit+0x7b
#17 0xffffffff81052bae at fork_trampoline+0xe
Uptime: 1h31m21s
Automatic reboot in 15 seconds - press a key on the console to abort
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-15-amd64-49' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-dtrace-tests.sh
x ./run.sh
x ./disable-zfs-tests.sh
x ./disable-notyet-tests.sh
x ./run-kyua.sh
x ./auto-shutdown
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-15-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-15-amd64-test] $ /bin/sh -xe /tmp/jenkins2858608055851172116.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-15-amd64-test', 'commit': '8a0cdfc5a58d75272ec98a14c9cc7469db6b51f0', 'branch': 'stable-15', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-15/latest_tested/amd64/amd64 -> ../../8a0cdfc5a58d75272ec98a14c9cc7469db6b51f0/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address