FreeBSD-stable-15-amd64-test - Build #51 - Still Failing
Date: Sat, 11 Oct 2025 02:17:15 UTC
FreeBSD-stable-15-amd64-test - Build #51 (b84e5059dbdd3f17c4f11e1b6dd21c80c0ff6b8d) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/51/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/51/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/51/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
b84e5059dbdd3f17c4f11e1b6dd21c80c0ff6b8d by dch:
release: switch OCI containers to use pkg sets
The end of the build log:
[...truncated 4.33 MiB...]
epair0b: Ethernet address: ee:aa:b7:5c:3d:75
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ee:d2:d1:35:e2:c5
epair1b: Ethernet address: c6:27:86:cb:64:fd
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.170s]
sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: 66:29:a9:ab:b9:6e
epair0b: Ethernet address: ee:84:92:5e:de:ec
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 5a:3c:1d:3c:72:20
epair1b: Ethernet address: 0a:86:89:f2:62:d2
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.250s]
sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: ea:0d:1b:28:54:5b
epair0b: Ethernet address: 1e:79:25:f3:b8:3c
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 9a:b0:64:7f:df:ff
epair1b: Ethernet address: 66:79:57:f3:b9:59
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.159s]
sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: 6e:3f:4e:62:42:19
epair0b: Ethernet address: 5e:28:9f:87:02:69
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: a2:1c:0b:a3:9b:84
epair1b: Ethernet address: 7e:50:de:37:d7:0f
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.160s]
sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: ca:e4:90:dd:a4:8e
epair0b: Ethernet address: 16:d5:17:3b:36:52
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: a2:43:b9:cd:99:af
epair1b: Ethernet address: 02:38:11:ca:0e:67
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.161s]
sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: c2:8c:39:8b:74:b6
epair0b: Ethernet address: 7a:3b:b5:f5:eb:52
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: be:08:b8:37:27:95
epair1b: Ethernet address: 4e:07:29:fe:46:81
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.160s]
sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: 0e:28:c0:63:61:0f
epair0b: Ethernet address: 96:fe:b4:1e:d3:9b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 7e:d5:30:e2:9d:cf
epair1b: Ethernet address: be:a1:86:89:eb:01
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.170s]
sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: 82:2a:d5:82:ea:ce
epair0b: Ethernet address: 96:c1:36:95:1b:12
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 6a:2b:54:e0:b8:fe
epair1b: Ethernet address: 72:11:7b:1d:0a:ee
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.159s]
sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: ba:03:35:d5:2a:8a
epair0b: Ethernet address: 8e:6e:3e:ed:61:c2
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 12:bd:14:bb:3e:6a
epair1b: Ethernet address: c6:f3:23:63:27:30
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 16:b9:30:ae:b2:c6
epair2b: Ethernet address: 32:ce:e5:5c:23:9b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.229s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: e6:9e:38:a1:cc:62
epair0b: Ethernet address: f2:67:ce:f7:4d:52
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: e2:ef:ac:84:52:48
epair1b: Ethernet address: 3a:60:24:0e:74:60
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 26:f3:1c:ac:60:98
epair2b: Ethernet address: b2:12:36:0d:12:fe
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [5.764s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: d6:bb:6e:a8:ae:78
epair0b: Ethernet address: 96:89:35:a2:69:33
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: e2:96:ff:12:f9:1a
epair1b: Ethernet address: 2e:6e:4d:b5:4a:81
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 42:6c:10:23:9a:58
epair2b: Ethernet address: be:5d:dd:e6:bd:ba
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address = 0x18
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80c0f132
stack pointer = 0x28:0xfffffe008aef2980
frame pointer = 0x28:0xfffffe008aef29c0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (swi1: netisr 0)
rdi: fffffe008aef29d8 rsi: fffff8010471d696 rdx: 00000000ffffffff
rcx: 0000000000008466 r8: fffffe008aef2900 r9: 0000000000000003
rax: 0000000000000000 rbx: 0000000000000000 rbp: fffffe008aef29c0
r10: 0000000000000001 r11: 0000000000000000 r12: 0000000000000000
r13: 000000000000000b r14: 000000000000000b r15: 00000000000001f5
trap number = 12
panic: page fault
cpuid = 1
time = 1760149019
KDB: stack backtrace:
#0 0xffffffff80bc033d at kdb_backtrace+0x5d
#1 0xffffffff80b73726 at vpanic+0x136
#2 0xffffffff80b735e3 at panic+0x43
#3 0xffffffff8107bf69 at trap_pfault+0x3c9
#4 0xffffffff81051b88 at calltrap+0x8
#5 0xffffffff80d84af9 at in6_cksum_partial_l2+0x109
#6 0xffffffff8295cab5 at fr_cksum+0xa5
#7 0xffffffff829621dd at ipf_checkl4sum+0xbd
#8 0xffffffff829586f6 at ipf_checkv6sum+0x56
#9 0xffffffff8295a601 at ipf_makefrip+0x1691
#10 0xffffffff8295b6de at ipf_check+0x15e
#11 0xffffffff82958c28 at ipf_check_wrapper6+0x58
#12 0xffffffff80cc3438 at pfil_mbuf_in+0x38
#13 0xffffffff80d92b74 at ip6_input+0x484
#14 0xffffffff80cc0c98 at swi_net+0x128
#15 0xffffffff80b2d359 at ithread_loop+0x239
#16 0xffffffff80b298eb at fork_exit+0x7b
#17 0xffffffff81052bae at fork_trampoline+0xe
Uptime: 1h39m42s
Automatic reboot in 15 seconds - press a key on the console to abort
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-15-amd64-51' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-notyet-tests.sh
x ./disable-zfs-tests.sh
x ./run-kyua.sh
x ./disable-dtrace-tests.sh
x ./run.sh
x ./auto-shutdown
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-15-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-15-amd64-test] $ /bin/sh -xe /tmp/jenkins2338942296803023286.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-15-amd64-test', 'commit': 'b84e5059dbdd3f17c4f11e1b6dd21c80c0ff6b8d', 'branch': 'stable-15', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-15/latest_tested/amd64/amd64 -> ../../b84e5059dbdd3f17c4f11e1b6dd21c80c0ff6b8d/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address