FreeBSD-main-amd64-test - Build #26941 - Still Failing

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26942 - Still Failing"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26940 - Still Failing"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Thu, 09 Oct 2025 20:26:31 UTC
FreeBSD-main-amd64-test - Build #26941 (a7d9c69fa903ad880f9dd36505f9d824f668283e) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26941/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26941/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26941/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

a7d9c69fa903ad880f9dd36505f9d824f668283e by brd:
g_part: Replace some spaces with tabs to match the rest of this struct



The end of the build log:

[...truncated 4.02 MiB...]
epair0b: link state changed to UP
epair1a: Ethernet address: 0e:8b:ec:a1:45:3f
epair1b: Ethernet address: 22:b5:5d:e0:e2:06
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.267s]
sys/netpfil/pf/nat64:tcp_in_floating  ->  epair0a: Ethernet address: 6a:fb:19:d1:88:4f
epair0b: Ethernet address: 82:f5:0e:8e:cc:91
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: b6:54:43:d4:d3:d9
epair1b: Ethernet address: d6:ab:7d:99:26:d5
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.237s]
sys/netpfil/pf/nat64:tcp_in_if_bound  ->  epair0a: Ethernet address: c6:8b:3c:02:3e:a2
epair0b: Ethernet address: ee:f9:df:58:5a:bd
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: d2:9f:ca:04:9b:e0
epair1b: Ethernet address: fe:11:cb:cb:a5:cb
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.317s]
sys/netpfil/pf/nat64:tcp_out_floating  ->  epair0a: Ethernet address: 9e:01:75:74:45:b8
epair0b: Ethernet address: c6:e8:63:06:42:59
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: aa:47:e9:40:de:91
epair1b: Ethernet address: 26:84:b7:31:5f:a9
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.237s]
sys/netpfil/pf/nat64:tcp_out_if_bound  ->  epair0a: Ethernet address: 16:75:a9:e9:65:5c
epair0b: Ethernet address: fa:48:6d:bb:95:50
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: c2:b9:02:30:75:64
epair1b: Ethernet address: 0e:f3:ab:44:6d:ed
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.279s]
sys/netpfil/pf/nat64:tos  ->  epair0a: Ethernet address: 52:28:18:12:c6:28
epair0b: Ethernet address: 86:20:7f:28:7d:d7
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 4a:c1:e5:bf:fd:1c
epair1b: Ethernet address: 16:0a:d8:9e:92:51
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.237s]
sys/netpfil/pf/nat64:udp_in  ->  epair0a: Ethernet address: 22:7d:cc:4d:eb:1c
epair0b: Ethernet address: da:55:f1:db:bd:44
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 56:ff:65:de:49:68
epair1b: Ethernet address: 26:5c:1e:52:c9:8a
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.248s]
sys/netpfil/pf/nat64:udp_out  ->  epair0a: Ethernet address: 1e:f8:5e:62:f5:0f
epair0b: Ethernet address: 1a:21:00:c9:28:3e
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 32:2c:15:2f:34:ad
epair1b: Ethernet address: 52:bf:9e:f6:fa:6e
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.238s]
sys/netpfil/pf/nat64:v6_gateway  ->  epair0a: Ethernet address: f6:f8:3a:73:2f:34
epair0b: Ethernet address: 82:9c:70:64:3b:73
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 22:ae:d3:5a:e8:0e
epair1b: Ethernet address: 96:f3:83:4a:43:f9
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 96:59:1f:e5:30:69
epair2b: Ethernet address: da:b2:69:0c:79:84
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.336s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable  ->  epair0a: Ethernet address: ee:fb:5a:77:cd:3e
epair0b: Ethernet address: f2:a8:ee:4a:98:61
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: d2:81:ca:d4:ee:f3
epair1b: Ethernet address: 1a:48:46:f2:20:a8
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 7a:97:bd:9e:31:ae
epair2b: Ethernet address: ba:34:9b:29:5e:41
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError  [5.096s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len  ->  epair0a: Ethernet address: 9e:24:80:55:19:e1
epair0b: Ethernet address: 3e:d8:d1:b1:43:67
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 9e:42:2c:4a:b5:d9
epair1b: Ethernet address: 8e:79:98:3e:2f:70
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: d2:ed:72:b0:77:33
epair2b: Ethernet address: 1a:bb:2a:26:2e:09
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
panic: in6_cksum_partial_l2: mbuf len (51) < off(40)+len(512)
cpuid = 0
time = 1760041590
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008baf0820
vpanic() at vpanic+0x136/frame 0xfffffe008baf0950
panic() at panic+0x43/frame 0xfffffe008baf09b0
in6_cksum_partial_l2() at in6_cksum_partial_l2+0x17f/frame 0xfffffe008baf0a00
fr_cksum() at fr_cksum+0xa5/frame 0xfffffe008baf0a30
ipf_checkl4sum() at ipf_checkl4sum+0xbd/frame 0xfffffe008baf0a60
ipf_checkv6sum() at ipf_checkv6sum+0x56/frame 0xfffffe008baf0a80
ipf_makefrip() at ipf_makefrip+0x1691/frame 0xfffffe008baf0b10
ipf_check() at ipf_check+0x15e/frame 0xfffffe008baf0ca0
ipf_check_wrapper6() at ipf_check_wrapper6+0x6f/frame 0xfffffe008baf0cd0
pfil_mbuf_in() at pfil_mbuf_in+0x58/frame 0xfffffe008baf0d00
ip6_input() at ip6_input+0x6be/frame 0xfffffe008baf0de0
swi_net() at swi_net+0x19b/frame 0xfffffe008baf0e60
ithread_loop() at ithread_loop+0x266/frame 0xfffffe008baf0ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008baf0f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008baf0f30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 12 tid 100033 ]
Stopped at      kdb_enter+0x33: movq    $0,0x121da42(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 0
dynamic pcpu = 0xa075c0
curthread    = 0xfffff80004628780: pid 12 tid 100033 critnest 1 "swi1: netisr 0"
curpcb       = 0xfffff80004628cd0
fpcurthread  = none
idlethread   = 0xfffff8000460b780: tid 100003 "idle: cpu0"
self         = 0xffffffff82610000
curpmap      = 0xffffffff81d9f520
tssp         = 0xffffffff82610384
rsp0         = 0xfffffe008baf1000
kcr3         = 0x800000000259b002
ucr3         = 0xffffffffffffffff
scr3         = 0x1ea78f998
gs32p        = 0xffffffff82610404
ldt          = 0xffffffff82610444
tss          = 0xffffffff82610434
curvnet      = 0xfffff80003239580
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 1h26m32s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26941' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-dtrace-tests.sh
x ./auto-shutdown
x ./run.sh
x ./disable-zfs-tests.sh
x ./disable-notyet-tests.sh
x ./run-kyua.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins15322653353805878485.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'a7d9c69fa903ad880f9dd36505f9d824f668283e', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../a7d9c69fa903ad880f9dd36505f9d824f668283e/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address