FreeBSD-main-amd64-test - Build #26942 - Still Failing

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26943 - Still Failing"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26941 - Still Failing"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Thu, 09 Oct 2025 22:11:13 UTC
FreeBSD-main-amd64-test - Build #26942 (bb339adfb2a26c5bb71cd4275dff80f615534ab6) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26942/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26942/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26942/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

f5544556754ec6b33c1d13c7648a354fef645b2f by olce:
getgrouplist.3: Insist on the value returned in 'ngroups'; Minor changes

bb339adfb2a26c5bb71cd4275dff80f615534ab6 by olce:
nfsuserd: Fix OOB access on membership of too many groups



The end of the build log:

[...truncated 4.33 MiB...]
epair0b: link state changed to UP
epair1a: Ethernet address: 02:47:c2:f0:a7:03
epair1b: Ethernet address: 62:ef:fa:1a:10:19
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.275s]
sys/netpfil/pf/nat64:tcp_in_floating  ->  epair0a: Ethernet address: 9e:c4:d4:0f:1d:33
epair0b: Ethernet address: f2:4a:7f:a9:4e:c4
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 26:64:2c:2d:e4:cb
epair1b: Ethernet address: 26:12:75:01:f5:9e
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.266s]
sys/netpfil/pf/nat64:tcp_in_if_bound  ->  epair0a: Ethernet address: f6:4e:80:e8:6a:5f
epair0b: Ethernet address: f2:36:77:8a:e3:21
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: aa:e7:ca:06:bd:bb
epair1b: Ethernet address: e6:8c:34:21:9b:ef
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.245s]
sys/netpfil/pf/nat64:tcp_out_floating  ->  epair0a: Ethernet address: c2:13:c9:dc:35:1b
epair0b: Ethernet address: 0a:bb:12:e3:8b:e2
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 1a:6b:b4:d7:68:7c
epair1b: Ethernet address: 36:2a:96:f9:48:56
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.235s]
sys/netpfil/pf/nat64:tcp_out_if_bound  ->  epair0a: Ethernet address: ca:63:80:4b:e9:92
epair0b: Ethernet address: 8e:fe:6c:63:08:7d
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 12:5b:52:aa:1d:a5
epair1b: Ethernet address: 82:91:b5:03:c5:a3
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.234s]
sys/netpfil/pf/nat64:tos  ->  epair0a: Ethernet address: 26:35:ff:f7:47:d4
epair0b: Ethernet address: 12:33:b6:be:e1:2b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ea:32:7b:58:48:77
epair1b: Ethernet address: ba:3c:bd:ff:5e:c4
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.247s]
sys/netpfil/pf/nat64:udp_in  ->  epair0a: Ethernet address: a2:c6:6d:d5:d1:b5
epair0b: Ethernet address: 1a:46:6e:ea:f0:c0
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 52:e3:19:95:77:85
epair1b: Ethernet address: 02:dd:82:aa:ad:73
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.257s]
sys/netpfil/pf/nat64:udp_out  ->  epair0a: Ethernet address: 32:b9:53:f2:ec:ba
epair0b: Ethernet address: 42:f4:59:fb:cc:5d
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ee:b6:f8:24:e0:fb
epair1b: Ethernet address: 7a:e0:03:10:2d:1a
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.256s]
sys/netpfil/pf/nat64:v6_gateway  ->  epair0a: Ethernet address: d2:39:5b:cc:de:9a
epair0b: Ethernet address: 46:b1:db:92:31:e4
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ae:28:35:7d:e7:95
epair1b: Ethernet address: 5a:92:92:b4:c6:19
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: aa:5b:b6:df:b2:1e
epair2b: Ethernet address: 6a:2a:5b:38:04:eb
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.387s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable  ->  epair0a: Ethernet address: 4e:a9:14:6a:b0:1b
epair0b: Ethernet address: 6a:52:c3:f2:d8:11
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 76:55:21:7a:10:2d
epair1b: Ethernet address: de:f4:8d:af:ba:38
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: a6:ef:9e:a0:84:2e
epair2b: Ethernet address: 82:06:ad:35:af:f6
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError  [5.474s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len  ->  epair0a: Ethernet address: 4e:d4:d0:db:4b:de
epair0b: Ethernet address: be:e7:a7:2d:38:08
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: a2:29:9c:0c:b7:47
epair1b: Ethernet address: 22:4f:6b:19:76:cc
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 32:40:03:c5:76:a7
epair2b: Ethernet address: 3a:92:6e:b5:da:b5
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
panic: in6_cksum_partial_l2: mbuf len (51) < off(40)+len(512)
cpuid = 0
time = 1760047872
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008baf0820
vpanic() at vpanic+0x136/frame 0xfffffe008baf0950
panic() at panic+0x43/frame 0xfffffe008baf09b0
in6_cksum_partial_l2() at in6_cksum_partial_l2+0x17f/frame 0xfffffe008baf0a00
fr_cksum() at fr_cksum+0xa5/frame 0xfffffe008baf0a30
ipf_checkl4sum() at ipf_checkl4sum+0xbd/frame 0xfffffe008baf0a60
ipf_checkv6sum() at ipf_checkv6sum+0x56/frame 0xfffffe008baf0a80
ipf_makefrip() at ipf_makefrip+0x1691/frame 0xfffffe008baf0b10
ipf_check() at ipf_check+0x15e/frame 0xfffffe008baf0ca0
ipf_check_wrapper6() at ipf_check_wrapper6+0x6f/frame 0xfffffe008baf0cd0
pfil_mbuf_in() at pfil_mbuf_in+0x58/frame 0xfffffe008baf0d00
ip6_input() at ip6_input+0x6be/frame 0xfffffe008baf0de0
swi_net() at swi_net+0x19b/frame 0xfffffe008baf0e60
ithread_loop() at ithread_loop+0x266/frame 0xfffffe008baf0ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008baf0f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008baf0f30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 12 tid 100033 ]
Stopped at      kdb_enter+0x33: movq    $0,0x121da42(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 0
dynamic pcpu = 0xa075c0
curthread    = 0xfffff80004628780: pid 12 tid 100033 critnest 1 "swi1: netisr 0"
curpcb       = 0xfffff80004628cd0
fpcurthread  = none
idlethread   = 0xfffff8000460b780: tid 100003 "idle: cpu0"
self         = 0xffffffff82610000
curpmap      = 0xffffffff81d9f520
tssp         = 0xffffffff82610384
rsp0         = 0xfffffe008baf1000
kcr3         = 0x800000000259b002
ucr3         = 0xffffffffffffffff
scr3         = 0x5fc9aa24
gs32p        = 0xffffffff82610404
ldt          = 0xffffffff82610444
tss          = 0xffffffff82610434
curvnet      = 0xfffff80003239700
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 1h43m33s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26942' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./run.sh
x ./run-kyua.sh
x ./disable-notyet-tests.sh
x ./auto-shutdown
x ./disable-zfs-tests.sh
x ./disable-dtrace-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins15308153722250760401.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'bb339adfb2a26c5bb71cd4275dff80f615534ab6', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../bb339adfb2a26c5bb71cd4275dff80f615534ab6/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address