FreeBSD-main-amd64-test - Build #26940 - Still Failing

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26941 - Still Failing"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26939 - Still Failing"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Thu, 09 Oct 2025 18:58:55 UTC
FreeBSD-main-amd64-test - Build #26940 (55c28005f544282b984ae0e15dacd0c108d8ab12) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26940/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26940/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26940/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

0d14826de7d9d72e91f1d396120f1456102bccf4 by jtl:
x86: Allow MCA messages to be rate-limited

55c28005f544282b984ae0e15dacd0c108d8ab12 by jtl:
x86: support sending non-fatal MCA messages to syslog



The end of the build log:

[...truncated 3.90 MiB...]
epair0b: link state changed to UP
epair1a: Ethernet address: 0e:eb:3f:75:5f:12
epair1b: Ethernet address: ea:23:7c:dd:03:e9
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.249s]
sys/netpfil/pf/nat64:tcp_in_floating  ->  epair0a: Ethernet address: 96:1e:7c:c6:c9:31
epair0b: Ethernet address: da:5f:be:f6:3a:b2
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 42:fd:38:2d:f1:f5
epair1b: Ethernet address: 22:89:24:82:32:ad
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.239s]
sys/netpfil/pf/nat64:tcp_in_if_bound  ->  epair0a: Ethernet address: de:ba:15:7d:13:76
epair0b: Ethernet address: 9e:80:5c:99:91:d4
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: da:75:61:8a:4f:37
epair1b: Ethernet address: 2a:b0:21:6d:96:9f
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.228s]
sys/netpfil/pf/nat64:tcp_out_floating  ->  epair0a: Ethernet address: 22:3d:c7:1a:e3:4c
epair0b: Ethernet address: 26:fb:b8:b7:22:52
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 26:2f:b9:c1:4e:11
epair1b: Ethernet address: f2:31:5a:8e:cb:f4
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.238s]
sys/netpfil/pf/nat64:tcp_out_if_bound  ->  epair0a: Ethernet address: ee:cd:03:9e:e1:6d
epair0b: Ethernet address: 3a:9a:83:0c:4f:fc
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 52:f3:3a:22:ea:1e
epair1b: Ethernet address: e6:78:03:38:78:51
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.238s]
sys/netpfil/pf/nat64:tos  ->  epair0a: Ethernet address: 6a:21:70:ae:30:5e
epair0b: Ethernet address: 02:79:47:34:00:46
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 8a:46:28:e2:f5:bb
epair1b: Ethernet address: ce:1f:36:7b:28:6f
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.252s]
sys/netpfil/pf/nat64:udp_in  ->  epair0a: Ethernet address: 0a:5a:a8:d7:f5:b9
epair0b: Ethernet address: 4a:88:90:27:76:0f
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 12:47:ad:b8:dc:ba
epair1b: Ethernet address: 2e:8c:be:10:4e:8e
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.239s]
sys/netpfil/pf/nat64:udp_out  ->  epair0a: Ethernet address: b2:b6:b3:9c:4f:a9
epair0b: Ethernet address: 4a:36:bb:e6:0c:15
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: e6:21:3d:33:d5:a2
epair1b: Ethernet address: da:4d:a9:c9:0c:69
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.281s]
sys/netpfil/pf/nat64:v6_gateway  ->  epair0a: Ethernet address: 0a:5b:3f:7a:8a:66
epair0b: Ethernet address: b6:cd:c4:43:49:07
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 06:08:65:26:d7:32
epair1b: Ethernet address: 86:4d:b9:d4:d8:21
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 0a:5b:38:a0:a2:ba
epair2b: Ethernet address: b2:5a:c7:c5:44:7a
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.359s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable  ->  epair0a: Ethernet address: 0e:ad:39:7e:53:7e
epair0b: Ethernet address: 52:56:7f:d4:08:6a
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 6a:76:e3:ad:2a:61
epair1b: Ethernet address: 1a:95:56:05:fc:6b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: ba:f6:de:6b:54:94
epair2b: Ethernet address: 6a:1f:dc:5b:df:a6
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError  [5.075s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len  ->  epair0a: Ethernet address: 52:49:6f:58:5d:68
epair0b: Ethernet address: 22:01:a9:27:28:4a
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 42:26:5d:b8:93:73
epair1b: Ethernet address: 9a:25:c0:35:b9:4a
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 82:13:b6:95:9f:d2
epair2b: Ethernet address: d6:91:dd:d4:0b:cd
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
panic: in6_cksum_partial_l2: mbuf len (51) < off(40)+len(512)
cpuid = 1
time = 1760036333
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008baf0820
vpanic() at vpanic+0x136/frame 0xfffffe008baf0950
panic() at panic+0x43/frame 0xfffffe008baf09b0
in6_cksum_partial_l2() at in6_cksum_partial_l2+0x17f/frame 0xfffffe008baf0a00
fr_cksum() at fr_cksum+0xa5/frame 0xfffffe008baf0a30
ipf_checkl4sum() at ipf_checkl4sum+0xbd/frame 0xfffffe008baf0a60
ipf_checkv6sum() at ipf_checkv6sum+0x56/frame 0xfffffe008baf0a80
ipf_makefrip() at ipf_makefrip+0x1691/frame 0xfffffe008baf0b10
ipf_check() at ipf_check+0x15e/frame 0xfffffe008baf0ca0
ipf_check_wrapper6() at ipf_check_wrapper6+0x6f/frame 0xfffffe008baf0cd0
pfil_mbuf_in() at pfil_mbuf_in+0x58/frame 0xfffffe008baf0d00
ip6_input() at ip6_input+0x6be/frame 0xfffffe008baf0de0
swi_net() at swi_net+0x19b/frame 0xfffffe008baf0e60
ithread_loop() at ithread_loop+0x266/frame 0xfffffe008baf0ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008baf0f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008baf0f30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 12 tid 100033 ]
Stopped at      kdb_enter+0x33: movq    $0,0x121da42(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 1
dynamic pcpu = 0xfffffe008d1c25c0
curthread    = 0xfffff80004628780: pid 12 tid 100033 critnest 1 "swi1: netisr 0"
curpcb       = 0xfffff80004628cd0
fpcurthread  = none
idlethread   = 0xfffff8000460b000: tid 100004 "idle: cpu1"
self         = 0xffffffff82611000
curpmap      = 0xffffffff81d9f520
tssp         = 0xffffffff82611384
rsp0         = 0xfffffe008baf1000
kcr3         = 0x800000000259b002
ucr3         = 0xffffffffffffffff
scr3         = 0x16a6f9a65
gs32p        = 0xffffffff82611404
ldt          = 0xffffffff82611444
tss          = 0xffffffff82611434
curvnet      = 0xfffff8014a907180
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 1h18m19s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26940' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./run.sh
x ./disable-notyet-tests.sh
x ./run-kyua.sh
x ./auto-shutdown
x ./disable-dtrace-tests.sh
x ./disable-zfs-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins294411616527858234.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '55c28005f544282b984ae0e15dacd0c108d8ab12', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../55c28005f544282b984ae0e15dacd0c108d8ab12/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address