FreeBSD-main-amd64-test - Build #26939 - Still Failing

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26940 - Still Failing"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26938 - Still Failing"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Thu, 09 Oct 2025 17:39:22 UTC
FreeBSD-main-amd64-test - Build #26939 (ab837a2eed6d7562d538ac5f90b3b2776a9f0f5f) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26939/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26939/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26939/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

ab837a2eed6d7562d538ac5f90b3b2776a9f0f5f by tuexen:
sockstat: improve indentation



The end of the build log:

[...truncated 4.36 MiB...]
epair0b: link state changed to UP
epair1a: Ethernet address: 36:1d:df:f1:a8:29
epair1b: Ethernet address: 8e:55:84:a2:18:fc
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.282s]
sys/netpfil/pf/nat64:tcp_in_floating  ->  epair0a: Ethernet address: f2:e5:06:ee:2a:ba
epair0b: Ethernet address: c6:9c:ac:85:4b:9a
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 42:b6:ec:cd:19:4b
epair1b: Ethernet address: fe:13:c2:c5:53:f4
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.271s]
sys/netpfil/pf/nat64:tcp_in_if_bound  ->  epair0a: Ethernet address: e6:55:06:b8:7f:27
epair0b: Ethernet address: 9a:9e:f0:41:8e:ae
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 12:18:f8:5a:3f:76
epair1b: Ethernet address: 2e:9e:90:6f:61:47
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.282s]
sys/netpfil/pf/nat64:tcp_out_floating  ->  epair0a: Ethernet address: 8a:08:11:63:f9:e9
epair0b: Ethernet address: 7e:86:0c:61:a6:b1
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: c6:1f:48:82:63:21
epair1b: Ethernet address: 62:76:37:f8:65:95
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.272s]
sys/netpfil/pf/nat64:tcp_out_if_bound  ->  epair0a: Ethernet address: 2a:05:65:c7:f9:65
epair0b: Ethernet address: 32:ac:bc:a0:c6:14
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 8e:c0:f6:af:5c:04
epair1b: Ethernet address: 1e:fd:cf:83:75:28
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.312s]
sys/netpfil/pf/nat64:tos  ->  epair0a: Ethernet address: 56:8c:95:0b:3d:24
epair0b: Ethernet address: 8e:8f:7e:19:ce:83
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ba:20:fc:6b:19:22
epair1b: Ethernet address: 5e:0a:c6:60:ce:be
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.270s]
sys/netpfil/pf/nat64:udp_in  ->  epair0a: Ethernet address: 12:65:4d:4c:2c:4f
epair0b: Ethernet address: 8a:ba:2b:77:4d:75
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 1a:a2:53:27:c3:97
epair1b: Ethernet address: 32:2d:38:b3:f4:d3
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.282s]
sys/netpfil/pf/nat64:udp_out  ->  epair0a: Ethernet address: 66:2d:15:37:ce:72
epair0b: Ethernet address: 86:43:1b:aa:d4:12
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 06:97:5f:c4:56:68
epair1b: Ethernet address: da:74:d9:35:3e:ac
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.272s]
sys/netpfil/pf/nat64:v6_gateway  ->  epair0a: Ethernet address: 3a:19:b7:96:da:1c
epair0b: Ethernet address: ca:b7:55:b0:41:53
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 26:91:e9:fe:85:2f
epair1b: Ethernet address: 7e:9d:a7:7a:0d:ed
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 4e:bb:78:73:6b:8e
epair2b: Ethernet address: 6e:87:40:09:6d:fc
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.432s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable  ->  epair0a: Ethernet address: 8e:85:c1:18:75:6e
epair0b: Ethernet address: 76:93:94:40:7d:b1
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: d6:ac:92:84:7a:14
epair1b: Ethernet address: 96:b7:97:00:64:48
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: f6:cf:00:90:cd:3a
epair2b: Ethernet address: da:67:33:28:84:61
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError  [5.976s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len  ->  epair0a: Ethernet address: f6:2a:b7:55:c7:62
epair0b: Ethernet address: 9a:49:e7:40:43:b8
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 5e:45:67:33:03:54
epair1b: Ethernet address: 5a:46:ff:51:ab:2c
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 9e:d9:9f:dd:8a:3e
epair2b: Ethernet address: 42:ea:99:3c:ea:cb
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
panic: in6_cksum_partial_l2: mbuf len (51) < off(40)+len(512)
cpuid = 1
time = 1760031562
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008baf0820
vpanic() at vpanic+0x136/frame 0xfffffe008baf0950
panic() at panic+0x43/frame 0xfffffe008baf09b0
in6_cksum_partial_l2() at in6_cksum_partial_l2+0x17f/frame 0xfffffe008baf0a00
fr_cksum() at fr_cksum+0xa5/frame 0xfffffe008baf0a30
ipf_checkl4sum() at ipf_checkl4sum+0xbd/frame 0xfffffe008baf0a60
ipf_checkv6sum() at ipf_checkv6sum+0x56/frame 0xfffffe008baf0a80
ipf_makefrip() at ipf_makefrip+0x1691/frame 0xfffffe008baf0b10
ipf_check() at ipf_check+0x15e/frame 0xfffffe008baf0ca0
ipf_check_wrapper6() at ipf_check_wrapper6+0x6f/frame 0xfffffe008baf0cd0
pfil_mbuf_in() at pfil_mbuf_in+0x58/frame 0xfffffe008baf0d00
ip6_input() at ip6_input+0x6be/frame 0xfffffe008baf0de0
swi_net() at swi_net+0x19b/frame 0xfffffe008baf0e60
ithread_loop() at ithread_loop+0x266/frame 0xfffffe008baf0ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008baf0f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008baf0f30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 12 tid 100033 ]
Stopped at      kdb_enter+0x33: movq    $0,0x121da42(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 1
dynamic pcpu = 0xfffffe008d1c25c0
curthread    = 0xfffff80004628780: pid 12 tid 100033 critnest 1 "swi1: netisr 0"
curpcb       = 0xfffff80004628cd0
fpcurthread  = none
idlethread   = 0xfffff8000460b000: tid 100004 "idle: cpu1"
self         = 0xffffffff82611000
curpmap      = 0xffffffff81d9f520
tssp         = 0xffffffff82611384
rsp0         = 0xfffffe008baf1000
kcr3         = 0x800000000259b002
ucr3         = 0xffffffffffffffff
scr3         = 0x1536fe903
gs32p        = 0xffffffff82611404
ldt          = 0xffffffff82611444
tss          = 0xffffffff82611434
curvnet      = 0xfffff8000321f380
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 1h47m22s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26939' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./run.sh
x ./disable-dtrace-tests.sh
x ./auto-shutdown
x ./run-kyua.sh
x ./disable-zfs-tests.sh
x ./disable-notyet-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins15029486074977033515.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'ab837a2eed6d7562d538ac5f90b3b2776a9f0f5f', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../ab837a2eed6d7562d538ac5f90b3b2776a9f0f5f/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address