(probe23:arcmsr0:0:16:0): inquiry data fails comparison at DV1 step

[Richard Tector]

Mike Tancsa wrote:
> At 08:19 AM 6/10/2009, Andre Oppermann wrote:
>> Today I upgraded an AMD64 server from FreeBSD 6.4 to 7-STABLE and got 
>> a big
>> nasty surprise with the Areca RAID controller:
>>
>> arcmsr0: <Areca SATA Host Adapter RAID Controller (RAID6 capable)
>> > mem 0xfdbff000-0xfdb400000 irq16 at device 14.0 on pci18
>> ARECA RAID ADAPTER0: Driver Version 1.20.00.15 2007-10-07
>> ARECA RAID ADAPTER0: FIRMWARE VERSION V1.46 2009-01-06
>> arcmsr0: [ITHREAD]
>> ...
>> (probe23:arcmsr0:0:16:0): inquiry data fails comparison at DV1 step
>> run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config

As a further datapoint, I see no problems with amd64 RELENG_7 from May 
20th, though I am running an older firmware version. I also don't appear 
to receive the probe error the two of you are seeing.

arcmsr0: <Areca SATA Host Adapter RAID Controller (RAID6 capable)
 > mem 0xf4500000-0xf4500fff,0xf4000000-0xf43fffff irq 18 at device 14.0 
on pci7
ARECA RAID ADAPTER0: Driver Version 1.20.00.15 2007-10-07
ARECA RAID ADAPTER0: FIRMWARE VERSION V1.42 2006-10-13
arcmsr0: [ITHREAD]

da0 at arcmsr0 bus 0 target 0 lun 0
da0: <Areca BigVol01 R001> Fixed Direct Access SCSI-5 device
da0: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit)
da0: Command Queueing Enabled
da0: 1831054MB (3749999616 512 byte sectors: 255H 63S/T 233426C)