FreeBSD 7.0 BETA4 no serial console
Jeremy Chadwick
koitsu at FreeBSD.org
Mon Dec 17 04:51:44 PST 2007
On Mon, Dec 17, 2007 at 12:50:07PM +0100, Marian Hettwer wrote:
> marian46-23# stty -a -f /dev/ttyd0
> speed 9600 baud; 0 rows; 0 columns;
> lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl
> -echoprt -altwerase -noflsh -tostop -flusho -pendin -nokerninfo
> -extproc
> iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel -ignbrk
> brkint -inpck -ignpar -parmrk
> oflags: opost onlcr -ocrnl -oxtabs -onocr -onlret
> cflags: cread cs8 -parenb -parodd hupcl clocal -cstopb -crtscts -dsrflow
> -dtrflow -mdmbuf
> cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>;
> eol2 = <undef>; erase = ^?; erase2 = ^H; intr = ^C; kill = ^U;
> lnext = ^V; min = 1; quit = ^\; reprint = ^R; start = ^Q;
> status = ^T; stop = ^S; susp = ^Z; time = 0; werase = ^W;
>
> hm...
Identical to ours...
Well, the reason you'd get boot messages and kernel output would be that
neither of those (AFIAK) bothers to check for things like DTR/DSR and
DCD. getty, on the other hand, does. That's what makes me think it
might be a cabling or adapter issue. The 3wire.9600 test, I assume,
should've worked though...
> It's really really strange that I can see the whole boot process but don't
> have a login prompt in the end. strange.
Has this box been "upgraded" from RELENG_6 or anything like that? I
remember encountering a situation with one of our RELENG_6 boxes where
serial console would work fine up until the point of getting a login
prompt via getty, which never worked. Rebuilding kernel + world fixed
the problem (time delta between kernel/world builds was over 100 days,
and during that time I'm sure there were serial console changes).
--
| Jeremy Chadwick jdc at parodius.com |
| Parodius Networking http://www.parodius.com/ |
| UNIX Systems Administrator Mountain View, CA, USA |
| Making life hard for others since 1977. PGP: 4BD6C0CB |
More information about the freebsd-stable
mailing list