MultiTech MT128SA
Terry Glanfield
Terry.Glanfield at program-products.co.uk
Fri Jul 25 04:19:24 PDT 2003
Hi,
> I have a MultiTech MT128SA PCI ISDN TA which I'm having trouble
> configuring. The card reports an ID of 0x88167506 which matches the
> Dynalink ID.
>
> I've put tracing in isic_pnp_probe but this function is not being
> called. I suspect something in the pnp information.
I now have this card working with 5.1-RELEASE. There are differences
in the pnpinfo from 4.8-RELEASE, notable the IRQ. If anyone has any
ideas as to how to get this card working under -STABLE then I'm
willing to help.
Regards,
Terry.
5.1-RELEASE:
Checking for Plug-n-Play devices...
Card assigned CSN #1
Vendor ID ASU1688 (0x88167506), Serial Number 0x00000056
PnP Version 1.0, Vendor Version 0
Device Description: ISDN CARD ....
Logical Device ID: ASU1688 0x88167506 #0
Device supports I/O Range Check
I/O Range 0x100 .. 0x3f8, alignment 0x8, len 0x8
[not 16-bit addr]
IRQ: 3 4 5 9 10 11 12 15 IRQ: High true edge sensitive
IRQ: - only one type (true/edge)
End Tag
Successfully got 6 resources, 1 logical fdevs
-- card select # 0x0001
CSN ASU1688 (0x88167506), Serial Number 0x00000056
Logical device #0
IO: 0x0100 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 9 0
DMA 4 0
IO range check 0x00 activate 0x01
4.8-RELEASE:
Checking for Plug-n-Play devices...
Card assigned CSN #1
Vendor ID ASU1688 (0x88167506), Serial Number 0x00000056
PnP Version 1.0, Vendor Version 0
Device Description: ISDN CARD ....
Logical Device ID: ASU1688 0x88167506 #0
Device supports I/O Range Check
I/O Range 0x100 .. 0x3f8, alignment 0x8, len 0x8
[not 16-bit addr]
IRQ: 3 4 5 9 10 11 12 15 IRQ: High true edge sensitive
IRQ: - only one type (true/edge)
End Tag
Successfully got 6 resources, 1 logical fdevs
-- card select # 0x0001
CSN ASU1688 (0x88167506), Serial Number 0x00000056
Logical device #0
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 0
IO range check 0x00 activate 0x00
More information about the freebsd-isdn
mailing list