MultiTech MT128SA
Terry Glanfield
Terry.Glanfield at program-products.co.uk
Sun Jul 20 13:06:57 PDT 2003
Hi,
I have a MultiTech MT128SA PCI ISDN TA which I'm having trouble
configuring. The card reports an ID of 0x88167506 which matches the
Dynalink ID.
I've put tracing in isic_pnp_probe but this function is not being
called. I suspect something in the pnp information.
Any help would be much appreciated.
Regards,
Terry.
pnpinfo:
Checking for Plug-n-Play devices...
Card assigned CSN #1
Vendor ID ASU1688 (0x88167506), Serial Number 0x00000056
PnP Version 1.0, Vendor Version 0
Device Description: ISDN CARD ....
Logical Device ID: ASU1688 0x88167506 #0
Device supports I/O Range Check
I/O Range 0x100 .. 0x3f8, alignment 0x8, len 0x8
[not 16-bit addr]
IRQ: 3 4 5 9 10 11 12 15 IRQ: High true edge sensitive
IRQ: - only one type (true/edge)
End Tag
Successfully got 6 resources, 1 logical fdevs
-- card select # 0x0001
CSN ASU1688 (0x88167506), Serial Number 0x00000056
Logical device #0
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 0
IO range check 0x00 activate 0x00
Relevant kernel info:
device isic0
options DYNALINK
pseudo-device "i4bq921"
pseudo-device "i4bq931"
pseudo-device "i4b"
pseudo-device "i4btrc" 4
pseudo-device "i4bctl"
pseudo-device "i4brbch" 4
pseudo-device "i4btel" 2
pseudo-device "i4bipr" 4
pseudo-device "i4bisppp" 4
dmesg:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #14: Sun Jul 20 20:27:08 GMT 2003
root at gate:/usr/obj/usr/src/sys/GATE
Calibrating clock(s) ... TSC clock: 200472615 Hz, i8254 clock: 1193290 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium/P55C (200.46-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x544 Stepping = 4
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 33554432 (32768K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x00601000 - 0x01ff7fff, 27226112 bytes (6647 pages)
avail memory = 26787840 (26160K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fadd0
bios32: Entry = 0xfb250 (c00fb250) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xb280
pnpbios: Found PnP BIOS data at 0xc00fbdc0
pnpbios: Entry = f0000:bde8 Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc05da000.
Intel Pentium detected, installing workaround for F00F bug
Creating DISK md0
md0: Malloc disk
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71008086)
Using $PIR table, 6 entries at 0xc00fdb00
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 175654312 bytes/sec
bzero() bandwidth = 773993808 bytes/sec
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7100, revid=0x01
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7110, revid=0x01
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000f000, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=11
map[20]: type 1, range 32, base 00006400, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x01
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 00005000, size 4
found-> vendor=0x1002, dev=0x4755, revid=0x9a
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base e0000000, size 24
map[14]: type 1, range 32, base 00006500, size 8
map[18]: type 1, range 32, base e1000000, size 12
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: mask=03 ostat0=51 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x6400-0x641f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
pci0: <ATI Mach64-GU graphics accelerator> (vendor=0x1002, dev=0x4755) at 11.0
isa0: if_ep: <3Com 3C509-TP EtherLink III> at port 0x300-0x310 irq 5
ex_isa_identify()
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
ASU1688: adding io range 0x100-0x3ff, size=0x8, align=0x8
ASU1688: adding irq mask 0x9e38
ASU1688: adding irq mask 0000
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
ep0: <3Com 3C509-TP EtherLink III> at port 0x300-0x30f irq 5 on isa0
ep0: Ethernet address 00:60:8c:50:bc:b8
bpf: ep0 attached
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
adv0 failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: irq maps: 0x241 0x251 0x241 0x241
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x241 0x249 0x241 0x241
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: configured irq 7 not in bitmap of probed irqs 0
sio3: irq maps: 0x241 0x241 0x241 0x241
sio3: probe failed test(s): 0 1 2 4 6 7 9
sio3 failed to probe at port 0x2e8-0x2ef irq 7 on isa0
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <ISDN CARD ....> can't assign resources
unknown: <ISDN CARD ....> at port 0x100-0x107 irq 9 on isa0
BIOS Geometries:
0:03fd3f3f 0..1021=1022 cylinders, 0..63=64 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68c840, tty 63001a, net 67003a
bpf: sl0 attached
i4b: ISDN call control device attached
i4btel: 2 ISDN telephony interface device(s) attached
i4brbch: 4 raw B channel access device(s) attached
i4bipr: 4 IP over raw HDLC ISDN device(s) attached
bpf: ipr0 attached
bpf: ipr1 attached
bpf: ipr2 attached
bpf: ipr3 attached
i4bctl: ISDN system control port attached
i4btrc: 4 ISDN trace device(s) attached
bpf: faith0 attached
i4bisppp: 4 ISDN SyncPPP device(s) attached
bpf: isp0 attached
bpf: isp1 attached
bpf: isp2 attached
bpf: isp3 attached
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled
ad0: success setting UDMA2 on Intel chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <ST32122A/0.42> ATA-2 disk at ata0-master
ad0: 2014MB (4124736 sectors), 4092 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
ata1-master: piomode=3 dmamode=1 udmamode=-1 dmaflag=1
ata1-master: success setting PIO3 on generic chip
acd0: <MATSHITA CR-585/ZM50> CDROM drive at ata1 as master
acd0: read 4125KB/s (32015KB/s), 128KB buffer, PIO3
acd0: Reads: CD-R, CD-RW, CD-DA stream
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 4124735, size 4124673 : OK
start_init: trying /sbin/init
More information about the freebsd-isdn
mailing list