svn commit: r44390 - head/en_US.ISO8859-1/books/handbook/serialcomms
Warren Block
wblock at FreeBSD.org
Sun Mar 30 02:56:53 UTC 2014
Author: wblock
Date: Sun Mar 30 02:56:52 2014
New Revision: 44390
URL: http://svnweb.freebsd.org/changeset/doc/44390
Log:
Recover lost <replaceable> tags.
Modified:
head/en_US.ISO8859-1/books/handbook/serialcomms/chapter.xml
Modified: head/en_US.ISO8859-1/books/handbook/serialcomms/chapter.xml
==============================================================================
--- head/en_US.ISO8859-1/books/handbook/serialcomms/chapter.xml Sun Mar 30 02:49:18 2014 (r44389)
+++ head/en_US.ISO8859-1/books/handbook/serialcomms/chapter.xml Sun Mar 30 02:56:52 2014 (r44390)
@@ -463,7 +463,7 @@
<itemizedlist>
<listitem>
<para>Call-in ports are named
- <filename>/dev/ttyuN</filename>
+ <filename>/dev/ttyu<replaceable>N</replaceable></filename>
where <replaceable>N</replaceable> is the port number,
starting from zero. Generally, the call-in port is
used for terminals. Call-in ports require that the
@@ -474,7 +474,7 @@
<listitem>
<para>Call-out ports are named
- <filename>/dev/cuauN</filename>.
+ <filename>/dev/cuau<replaceable>N</replaceable></filename>.
Call-out ports are usually not used for terminals, but
are used for modems. The call-out port can be used if
the serial cable or the terminal does not support the
@@ -540,20 +540,20 @@
<para>Most devices in the kernel are accessed through
<quote>device special files</quote> which are located in
- <filename>/dev</filename>. The
+ <filename class="directory">/dev</filename>. The
<filename>sio</filename> devices are accessed through the
- <filename>/dev/ttyuN</filename>
+ <filename>/dev/ttyu<replaceable>N</replaceable></filename>
(dial-in) and
- <filename>/dev/cuauN</filename>
+ <filename>/dev/cuau<replaceable>N</replaceable></filename>
(call-out) devices. &os; also provides initialization
devices
- (<filename>/dev/ttyuN.init</filename>
+ (<filename>/dev/ttyu<replaceable>N</replaceable>.init</filename>
and
- <filename>/dev/cuauN.init</filename>)
+ <filename>/dev/cuau<replaceable>N</replaceable>.init</filename>)
and locking devices
- (<filename>/dev/ttyuN.lock</filename>
+ (<filename>/dev/ttyu<replaceable>N</replaceable>.lock</filename>
and
- <filename>/dev/cuauN.lock</filename>).
+ <filename>/dev/cuau<replaceable>N</replaceable>.lock</filename>).
The initialization devices are used to initialize
communications port parameters each time a port is opened,
such as <literal>crtscts</literal> for modems which use
@@ -573,8 +573,8 @@
<indexterm><primary><filename>cuau</filename></primary></indexterm>
<para>The
- <filename>ttyuN</filename> (or
- <filename>cuauN</filename>)
+ <filename>ttyu<replaceable>N</replaceable></filename> (or
+ <filename>cuau<replaceable>N</replaceable></filename>)
is the regular device to open for applications. When a
process opens the device, it will have a default set of
terminal I/O settings. These settings can be viewed with the
@@ -705,12 +705,12 @@
<para>To connect from a client system that runs &os; to the
serial connection of another system, use:</para>
- <screen>&prompt.root; <userinput>cu -l serial-port-device</userinput></screen>
+ <screen>&prompt.root; <userinput>cu -l <replaceable>serial-port-device</replaceable></userinput></screen>
<para>Where <quote>serial-port-device</quote> is the name of
a special device file denoting a serial port on the
system. These device files are called
- <filename>/dev/cuauN</filename>.</para>
+ <filename>/dev/cuau<replaceable>N</replaceable></filename>.</para>
<para>The <quote>N</quote>-part of a device name is the
serial port number.</para>
@@ -1409,7 +1409,7 @@ vq|VH57600|Very High Speed Modem at 5760
<para>If the modem is locked at a different data rate,
substitute the appropriate value for
- <literal>std.speed</literal>
+ <literal>std.<replaceable>speed</replaceable></literal>
instead of <literal>std.19200</literal>. Make sure to use
a valid type listed in
<filename>/etc/gettytab</filename>.</para>
@@ -1637,7 +1637,7 @@ AT&B2&W</programlisting>
<para>If no <command>getty</command> processes are waiting to
open the desired
- <filename>ttyuN</filename>
+ <filename>ttyu<replaceable>N</replaceable></filename>
port, double-check the entries in
<filename>/etc/ttys</filename> to see if there are any
mistakes. Also, check
@@ -1750,7 +1750,7 @@ AT&B2&W</programlisting>
<para>Or, use <command>cu</command> as <systemitem class="username">root</systemitem>
with the following command:</para>
- <screen>&prompt.root; <userinput>cu -lline -sspeed</userinput></screen>
+ <screen>&prompt.root; <userinput>cu -l<replaceable>line</replaceable> -s<replaceable>speed</replaceable></userinput></screen>
<para><replaceable>line</replaceable> is the serial port, such
as <filename>/dev/cuau0</filename>, and
@@ -1816,7 +1816,7 @@ tip57600|Dial any phone number at 57600
Server</title>
<para>Rather than waiting until connected and typing
- <command>CONNECT host</command>
+ <command>CONNECT <replaceable>host</replaceable></command>
each time, use <command>tip</command>'s <literal>cm</literal>
capability. For example, these entries in
<filename>/etc/remote</filename> will let you type
@@ -1879,7 +1879,7 @@ big-university 5551114</programlisting>
<quote>set a variable.</quote></para>
<para>Type
- <command>~sforce=single-char</command>
+ <command>~sforce=<replaceable>single-char</replaceable></command>
followed by a newline. <replaceable>single-char</replaceable>
is any single character. If
<replaceable>single-char</replaceable> is left out, then the
@@ -1974,7 +1974,7 @@ raisechar=^^</programlisting>
<para>To send files, start the receiving program on the remote
end. Then, type <command>~C sz
- files</command> to send them to the
+ <replaceable>files</replaceable></command> to send them to the
remote system.</para>
</sect2>
</sect1>
More information about the svn-doc-all
mailing list