PERFORCE change 189047 for review
Remko Lodder
remko at FreeBSD.org
Wed Feb 23 06:07:43 UTC 2011
http://p4web.freebsd.org/@@189047?ac=10
Change 189047 by remko at remko_nakur on 2011/02/23 06:07:07
IFC the latest and greatest changes we made recently, including
some additional translation of the FAQ which is outdated and
needs a lot of work.
Affected files ...
.. //depot/projects/docproj_nl/en_US.ISO8859-1/articles/committers-guide/article.sgml#35 integrate
.. //depot/projects/docproj_nl/en_US.ISO8859-1/books/handbook/install/chapter.sgml#17 integrate
.. //depot/projects/docproj_nl/nl_NL.ISO8859-1/books/faq/book.sgml#21 edit
.. //depot/projects/docproj_nl/nl_NL.ISO8859-1/books/handbook/install/chapter.sgml#22 integrate
Differences ...
==== //depot/projects/docproj_nl/en_US.ISO8859-1/articles/committers-guide/article.sgml#35 (text+ko) ====
@@ -9,7 +9,7 @@
<corpauthor>The &os; Documentation Project</corpauthor>
- <pubdate>$FreeBSD: doc/en_US.ISO8859-1/articles/committers-guide/article.sgml,v 1.292 2011/02/19 09:34:25 linimon Exp $</pubdate>
+ <pubdate>$FreeBSD: doc/en_US.ISO8859-1/articles/committers-guide/article.sgml,v 1.293 2011/02/22 10:27:25 ryusuke Exp $</pubdate>
<copyright>
<year>1999</year>
@@ -2934,7 +2934,7 @@
(this was the point of the exercise, remember?)
The new category should be listed
<emphasis>first</emphasis>. This will help to
- ensure that the the <makevar>PKGORIGIN</makevar>
+ ensure that the <makevar>PKGORIGIN</makevar>
is correct.</para>
</step>
==== //depot/projects/docproj_nl/en_US.ISO8859-1/books/handbook/install/chapter.sgml#17 (text+ko) ====
@@ -1,7 +1,7 @@
<!--
The FreeBSD Documentation Project
- $FreeBSD: doc/en_US.ISO8859-1/books/handbook/install/chapter.sgml,v 1.419 2011/02/17 19:32:59 remko Exp $
+ $FreeBSD: doc/en_US.ISO8859-1/books/handbook/install/chapter.sgml,v 1.420 2011/02/22 20:57:42 jkois Exp $
-->
<chapter id="install">
@@ -639,17 +639,6 @@
<warning>
<para>The example below
lists <filename class="devicefile">/dev/da0</filename> as the
- target device from which you will be booting. Be very careful
- that you have the correct device as the output target, or you
- may destroy your existing data.</para>
- </warning>
-
- <para>Set the <varname>kern.geom.debugflags</varname> sysctl to be
- able to write a master boot record to the target device.</para>
-
- <warning>
- <para>The example below
- lists <filename class="devicefile">/dev/da0</filename> as the
target device where the image will be written. Be very careful
that you have the correct device as the output target, or you
may destroy your existing data.</para>
@@ -679,11 +668,8 @@
<title>Using &windows; To Write the Image</title>
<warning>
- <para>The example below
- lists <filename class="devicefile">H:</filename> as the drive
- letter of the device where the image will be written. Be very
- careful that you have the correct device as the output target,
- or you may destroy existing data.</para>
+ <para>Make sure you use the correct drive letter as the output
+ target, or you may overwrite and destroy existing data.</para>
</warning>
<step>
@@ -691,8 +677,8 @@
<para><application>Image Writer for Windows</application> is a
free application that can correctly write an image file to a
- memory stick. Download it
- from <ulink url="http://launchpad.net/win32-image-writer/0.2/0.2/+download/win32diskimager-RELEASE-0.2-r23-win32.zip"></ulink>
+ memory stick. Download it from
+ <ulink url="http://launchpad.net/win32-image-writer/"></ulink>
and extract it into a folder.</para>
</step>
==== //depot/projects/docproj_nl/nl_NL.ISO8859-1/books/faq/book.sgml#21 (text+ko) ====
@@ -528,8 +528,8 @@
<emphasis>-STABLE</emphasis> een beetje frustrerend
zijn.</para>
- <para>Meer informatie over het releage engineering
- process (inclusief een schema van opkomende versies)
+ <para>Meer informatie over het release engineering
+ process (inclusief een schema van aankomende versies)
kan gevonden worden op de <ulink
url="http://www.FreeBSD.org/releng/index.html">release engineering</ulink>
pagina's op de &os; website.</para>
@@ -1068,9 +1068,9 @@
verwacht dat deze de pijn van het lezen van de
handleidingen of eigen onderzoek verzachten. Het is
primair een chat kanaal, en de onderwerpen daar gaan
- net zo makkelijk over sex, sport en nucleare wapens
+ net zo makkelijk over sex, sport en nucleaire wapens
als dat ze over &os; gaan. Je bent gewaarschuwd!
- Een beschikbare server is
+ Een van de beschikbare servers is
<hostid>irc.chat.org</hostid>.</para>
</listitem>
@@ -2477,19 +2477,19 @@
<qandaentry>
<question id="supported-cdrom-drives">
- <para>Which CD-ROM drives are supported by &os;?</para>
+ <para>Welke CD-ROM spelers worden ondersteund door &os;?</para>
</question>
<answer>
- <para>Any SCSI drive connected to a supported controller is
- supported.</para>
+ <para>Elke SCSI speler die gekoppeld is aan een ondersteunde
+ controller wordt ondersteund.</para>
- <para>The following proprietary CD-ROM interfaces are also
- supported:</para>
+ <para>De volgende proprietary CD-ROM interfaces worden ook
+ ondersteund:</para>
<itemizedlist>
<listitem>
- <para>Mitsumi LU002 (8bit), LU005 (16bit) and FX001D
+ <para>Mitsumi LU002 (8bit), LU005 (16bit) en FX001D
(16bit 2x Speed).</para>
</listitem>
@@ -2498,7 +2498,7 @@
</listitem>
<listitem>
- <para>Sound Blaster Non-SCSI CD-ROM</para>
+ <para>Sound Blaster zonder SCSI CD-ROM</para>
</listitem>
<listitem>
@@ -2510,48 +2510,52 @@
</listitem>
</itemizedlist>
- <para>All non-SCSI cards are known to be extremely slow
- compared to SCSI drives, and some ATAPI CD-ROMs may not
- work.</para>
+ <para>Bij alle niet SCSI kaarten is het bekend dat deze
+ extreem langzaam zijn in vergelijking met SCSI schijven
+ en sommige ATAPI CD-ROMs kunnen helemaal niet
+ werken.</para>
- <para>The official &os; CD-ROM ISO, and CD-ROMs from Daemon
- News and &os; Mall, support booting directly from the
- CD.</para>
+ <para>De officiele &os; CD-ROM ISO en de CD-ROMs van
+ Daemon News en &os; Mall, ondersteunen het direct
+ opstarten vanaf CD.</para>
</answer>
</qandaentry>
<qandaentry>
<question id="supported-cdrw-drives">
- <para>Which CD-RW drives are supported by &os;?</para>
+ <para>Welke CD-RW spelers worden ondersteund door &os;?</para>
</question>
<answer>
- <para>&os; supports any ATAPI-compatible IDE CD-R or CD-RW
- drive. See &man.burncd.8; for details.</para>
+ <para>&os; ondersteund elke ATAPI-compatible IDE CD-R of
+ CD-RW apparaat. Zie &man.burncd.8; voor meer
+ details.</para>
- <para>&os; also supports any SCSI CD-R or CD-RW drives.
- Install and use the <command>cdrecord</command> command
- from the ports or packages system, and make sure that you
- have the <devicename>pass</devicename> device compiled in
- your kernel.</para>
+ <para>&os; ondersteund ook elke SCSI CD-R of CD-RW schijf.
+ Installeer en gebruik het <command>cdrecord</command>
+ commando vanuit de Ports Collectie of het packages systeem,
+ en zorg ervoor dat het <devicename>pass</devicename>
+ apparaat in de kernel gecompileerd is.</para>
</answer>
</qandaentry>
<qandaentry>
<question id="zip-support">
- <para>Does &os; support &iomegazip; drives?</para>
+ <para>Ondersteund &os; &iomegazip; schijven?</para>
</question>
<answer>
- <para>&os; supports SCSI and ATAPI (IDE) &iomegazip; drives
- out of the box. SCSI ZIP drives can only be set to run at
- SCSI target IDs 5 or 6, but if your SCSI host adapter's
- BIOS supports it you can even boot from it. It is not
- clear which host adapters support booting from targets
- other than 0 or 1, so you will have to consult your
- adapter's documentation if you would like to use this
- feature.</para>
+ <para>&os; ondersteund zowel SCSI als ATAPI (IDE) &iomagezip;
+ schijven zonder verdere aanpassingen. SCSI ZIP schijven
+ kunnen alleen in gebruik worden genomen als deze zijn ingesteld
+ als SCSI target ID 5 of 6. Als zelfs de SCSI host adapter's BIOS
+ het ondersteund kan er vanaf opgestart worden. Het is niet
+ duidelijk welke host adapters het opstarten ondersteunen voor
+ targets anders dan 0 of 1, bekijk de documentatie van de adapter
+ als deze optie gebruikt moet worden.</para>
+ <para>&os; ondersteund ook Parallele port ZIP schijven.
+ Controleer
<para>&os; also supports Parallel Port Zip Drives. Check
that your kernel contains the
<devicename>scbus0</devicename>,
==== //depot/projects/docproj_nl/nl_NL.ISO8859-1/books/handbook/install/chapter.sgml#22 (text+ko) ====
@@ -1,10 +1,10 @@
<!--
The FreeBSD Dutch Documentation Project
- $FreeBSD: doc/nl_NL.ISO8859-1/books/handbook/install/chapter.sgml,v 1.21 2011/02/17 20:55:54 remko Exp $
+ $FreeBSD: doc/nl_NL.ISO8859-1/books/handbook/install/chapter.sgml,v 1.22 2011/02/23 06:04:59 remko Exp $
%SOURCE% en_US.ISO8859-1/books/handbook/install/chapter.sgml
- %SRCID% 1.419
+ %SRCID% 1.420
-->
<chapter id="install">
@@ -685,18 +685,6 @@
<warning>
<para>Het onderstaande voorbeeld vermeldt
- <filename class="devicefile">/dev/da0</filename> als het
- doelapparaat van waar af u zal opstarten. Zorg er voor dat u het
- juiste apparaat als het uitvoerapparaat opgeeft om te voorkomen
- dat u uw bestaande gegevens vernietigd.</para>
- </warning>
-
- <para>Stel de sysctl <varname>kern.geom.debugflags</varname> in om
- een master boot record naar het doelapparaat te kunnen
- schrijven.</para>
-
- <warning>
- <para>Het onderstaande voorbeeld vermeldt
<filename class="devicefile">/dev/da0</filename> als het
doelapparaat van waar af u zal opstarten. Zorg er voor dat u het
juiste apparaat als het uitvoerapparaat opgeeft om te voorkomen
@@ -727,13 +715,9 @@
<procedure>
<title>&windows; gebruiken om het beeldbestand te schrijven</title>
- <warning>
- <para>Het onderstaande voorbeeld vermeldt
- <filename class="devicefile">H:</filename> als de schijfletter
- van het apparaat waar het bestand op wordt geschreven. Zorg er
- voor dat u het juiste apparaat alshet uitvoerapparaat opgeeft om
- te voorkomen dat u uw bestaande gegevens vernietigd.</para>
- </warning>
+ <para>Zorg ervoor dat de juiste schijf letter gebruikt
+ wordt als doelschijf, anders kan het voorkomen dat er
+ bestaande data wordt overschreven.</para>
<step>
<title><application>Image Writer for Windows</application> verkrijgen</title>
@@ -741,7 +725,7 @@
<para><application>Image Writer for Windows</application>
is een gratis applicatie die een beeld bestand correct naar
een geheugen-stick kan schrijven. Download deze van
- <ulink url="http://launchpad.net/win32-image-writer/0.2/0.2/+download/win32diskimager-RELEASE-0.2-r23-win32.zip"></ulink>
+ <ulink url="http://launchpad.net/win32-image-writer/"></ulink>
en pak deze uit in een map.</para>
</step>
More information about the p4-projects
mailing list