testing new i915 driver ... it works ... kind of
Stefan Wendler
stefan.wendler at tngtech.com
Thu Jan 14 20:13:56 UTC 2016
Today I tested Revision 14cfa29 (find dmesg attached) and the screen was
blank again. After having a look at dmesg output again, I noticed that
it logged something about CRT3. Well, I rebooted with the i915 kernel
and attached an external monitor and well, it works there (even X with
intel driver).
So the notebook screen is not detected somehow. Is there something I can
try?
Cheers,
Stefan
-------------- next part --------------
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.2-RELEASE #0 r286666: Wed Aug 12 15:26:37 UTC 2015
root at releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT: running with driver "vga".
CPU: Intel(R) Core(TM) i7-4910MQ CPU @ 2.90GHz (2893.36-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,<b11>,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16236380160 (15484 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-GM >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: <Software, Yarrow> initialized
module_register_init: MOD_LOAD (vesa, 0xffffffff80db8eb0, 0) error 19
kbd1 at kbdmux0
acpi0: <LENOVO TP-GM> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x4000-0x407f mem 0xf2000000-0xf2ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> port 0x5000-0x503f mem 0xf3000000-0xf33fffff,0xc0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Haswell mobile GT2> on vgapci1
agp0: aperture size is 512M, detected 32764k stolen memory
vgapci1: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf4630000-0xf4633fff irq 16 at device 3.0 on pci0
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf4620000-0xf462ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
uart0: <Intel Lynx Point KT Controller> port 0x50b0-0x50b7 mem 0xf4640000-0xf4640fff irq 17 at device 22.3 on pci0
em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0x5080-0x509f mem 0xf4600000-0xf461ffff,0xf463f000-0xf463ffff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 54:ee:75:31:55:d9
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf463e000-0xf463e3ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac1: <Intel Lynx Point HDA Controller> mem 0xf4634000-0xf4637fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pci3: <unknown> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib3
pci4: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci5: <ACPI PCI bus> on pcib4
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf463d000-0xf463d3ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0x50a8-0x50af,0x50bc-0x50bf,0x50a0-0x50a7,0x50b8-0x50bb,0x5060-0x507f mem 0xf463c000-0xf463c7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek ALC292 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC292 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC292 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa1
pcm2: <Realtek ALC292 (Internal Analog Mic)> at nid 18 on hdaa1
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Samsung SSD 840 Series DXT08B0Q> ACS-2 ATA SATA 3.x device
ada0: Serial Number S14LNEAD801416V
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad4
ada1 at ahcich5 bus 0 scbus1 target 0 lun 0
ada1: <Samsung SSD 840 EVO 1TB EXT0BB6Q> ACS-2 ATA SATA 3.x device
ada1: Serial Number S1D9NSAF405493W
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada1: quirks=0x1<4K>
ada1: Previously was known as ad6
SMP: AP CPU #1 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1446682490 Hz quality 1000
Root mount waiting for: usbus2 usbus1 usbus0
uhub0: 21 ports with 21 removable, self powered
Root mount waiting for: usbus2 usbus1 usbus0
uhub1: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
ugen0.2: <Logitech> at usbus0
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 1> on usbus0
kbd2 at ukbd0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2
Root mount waiting for: usbus2 usbus1 usbus0
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen0.3: <vendor 0x0bda> at usbus0
urtwn0: <vendor 0x0bda product 0x8191, class 0/0, rev 2.00/2.00, addr 2> on usbus0
urtwn0: could not read efuse byte at address 0x2
urtwn0: could not read efuse byte at address 0x9
Root mount waiting for: usbus0
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
ugen0.4: <Lenovo> at usbus0
Trying to mount root from zfs:zroot/ROOT/default []...
wlan0: Ethernet address: e8:b1:fc:42:22:d2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 1> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 1> on usbus0
umodem0: <N5321 gw Mobile Broadband Modem> on usbus0
umodem0: data interface 2, has CM over data, has break
umodem1: <N5321 gw Mobile Broadband Data Modem> on usbus0
umodem1: data interface 4, has CM over data, has break
umodem2: <N5321 gw Mobile Broadband GPS Port> on usbus0
umodem2: data interface 10, has CM over data, has break
cdce0: <Ericsson N5321 gw> on usbus0
ue0: <USB Ethernet> on cdce0
ue0: Ethernet address: 02:15:e0:ec:01:00
vboxdrv: fAsync=0 offMin=0x200 offMax=0x1094
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 0 0 done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
All buffers synced.
Uptime: 17m52s
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #7 14cfa29(drm-i915-update-38): Thu Jan 14 20:40:52 CET 2016
root at hactar:/usr/obj/root/freebsd-base-graphics/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
WARNING: WITNESS option enabled, expect reduced performance.
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-4910MQ CPU @ 2.90GHz (2893.36-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16223191040 (15471 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-GM >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ec2510, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TP-GM> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x4000-0x407f mem 0xf2000000-0xf2ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> port 0x5000-0x503f mem 0xf3000000-0xf33fffff,0xc0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Haswell GT2 mobile> on vgapci1
agp0: aperture size is 512M, detected 32764k stolen memory
vgapci1: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf4630000-0xf4633fff irq 16 at device 3.0 on pci0
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf4620000-0xf462ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
uart0: <Intel Lynx Point KT Controller> port 0x50b0-0x50b7 mem 0xf4640000-0xf4640fff irq 17 at device 22.3 on pci0
em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0x5080-0x509f mem 0xf4600000-0xf461ffff,0xf463f000-0xf463ffff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 54:ee:75:31:55:d9
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf463e000-0xf463e3ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac1: <Intel Lynx Point HDA Controller> mem 0xf4634000-0xf4637fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <unknown> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf463d000-0xf463d3ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0x50a8-0x50af,0x50bc-0x50bf,0x50a0-0x50a7,0x50b8-0x50bb,0x5060-0x507f mem 0xf463c000-0xf463c7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
usbus0: 5.0Gbps Super Speed USB v3.0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek ALC292 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC292 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC292 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa1
pcm2: <Realtek ALC292 (Internal Analog Mic)> at nid 18 on hdaa1
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Samsung SSD 840 Series DXT08B0Q> ACS-2 ATA SATA 3.x device
ada0: Serial Number S14LNEAD801416V
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich5 bus 0 scbus1 target 0 lun 0
ada1: <Samsung SSD 840 EVO 1TB EXT0BB6Q> ACS-2 ATA SATA 3.x device
ada1: Serial Number S1D9NSAF405493W
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ada1: quirks=0x1<4K>
SMP: AP CPU #1 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1446681166 Hz quality 1000
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus2 usbus1 usbus0
random: unblocking device.
uhub0: 21 ports with 21 removable, self powered
Root mount waiting for: usbus2 usbus1 usbus0
uhub2: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
ugen0.2: <Logitech> at usbus0
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 1> on usbus0
kbd2 at ukbd0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2
Root mount waiting for: usbus2 usbus1 usbus0
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen0.3: <vendor 0x0bda> at usbus0
urtwn0: <vendor 0x0bda product 0x8191, class 0/0, rev 2.00/2.00, addr 2> on usbus0
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
Root mount waiting for: usbus0
ugen0.4: <Lenovo> at usbus0
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 1> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/24.00, addr 1> on usbus0
umodem0: <N5321 gw Mobile Broadband Modem> on usbus0
umodem0: data interface 2, has CM over data, has break
umodem1: <N5321 gw Mobile Broadband Data Modem> on usbus0
umodem1: data interface 4, has CM over data, has break
umodem2: <N5321 gw Mobile Broadband GPS Port> on usbus0
umodem2: data interface 10, has CM over data, has break
cdce0: <Ericsson N5321 gw> on usbus0
ue0: <USB Ethernet> on cdce0
ue0: Ethernet address: 02:15:e0:ec:01:00
KLD vboxnetflt.ko: depends on kernel - not available or version mismatch
linker_load_file: Unsupported file type
KLD linux_adobe.ko: depends on kernel - not available or version mismatch
linker_load_file: Unsupported file type
info: [drm] Initialized drm 1.1.0 20060810
[drm:pid1482:drm_probe_helper] drmn1 desc: Intel Haswell (GT2 mobile)
drmn1: <Intel Haswell (GT2 mobile)> on vgapci1
[drm:pid1482:drm_get_pci_dev]
[drm:pid1482:drm_ctxbitmap_next] bit : 0
[drm:pid1482:drm_ctxbitmap_init] drm_ctxbitmap_init : 0
[drm:pid1482:drm_get_minor]
[drm:pid1482:drm_get_minor] new minor assigned 65
[drm:pid1482:drm_get_minor]
[drm:pid1482:drm_get_minor] new minor assigned 1
[drm:KMS:pid1482:i915_dump_device_info] i915 device info: gen=7, pciid=0x0416 flags=is_mobile,need_gfx_hws,is_haswell,has_force_wake,has_hotplug,has_bsd_ring,has_blt_ring,has_llc,info: [drm] Memory usable by graphics device = 2048M
[drm:KMS:pid1482:i915_gem_gtt_init] GMADR size = 512M
[drm:KMS:pid1482:i915_gem_gtt_init] GTT stolen size = 0M
[drm:pid1482:drm_addmap_core] offset = 0xf3000000, size = 0x00200000, type = 1
[drm:KMS:pid1482:intel_detect_pch] Found LynxPoint PCH
iicbus0: <Philips I2C bus>error: [drm:pid1482:i915_write32] *ERROR* Unknown unclaimed register before writing to c5100
on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0x0
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0x0
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0x0
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0x0
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0x0
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
[drm:KMS:pid1482:intel_opregion_setup] graphic opregion physical addr: 0xbce45018
[drm:KMS:pid1482:intel_opregion_setup] Public ACPI methods supported
[drm:KMS:pid1482:intel_opregion_setup] SWSCI supported
[drm:KMS:pid1482:intel_opregion_setup] ASLE supported
[drm:pid1482:drm_pci_enable_msi] MSI count = 1
info: [drm] MSI enabled 1 message(s)
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
[drm:KMS:pid1482:init_vbt_defaults] Set default to SSC at 100MHz
[drm:KMS:pid1482:intel_parse_bios] Using VBT from OpRegion: $VBT HASWELL d
[drm:KMS:pid1482:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0
[drm:KMS:pid1482:parse_general_definitions] crt_ddc_bus_pin: 2
[drm:KMS:pid1482:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
[drm:KMS:pid1482:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 140000 1920 1968 2068 2100 1080 1083 1084 1110 0x8 0xa
[drm:KMS:pid1482:parse_lfp_panel_data] VBT initial LVDS value 30033c
[drm:KMS:pid1482:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[drm:KMS:pid1482:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[drm:KMS:pid1482:parse_sdvo_device_mapping] No SDVO device info is found in VBT
[drm:KMS:pid1482:intel_modeset_init] 3 display pipes available.
[drm:KMS:pid1482:intel_ddi_pll_init] CDCLK running at 540MHz
[drm:KMS:pid1482:intel_pch_pll_init] No PCH PLLs on this hardware, skipping initialisation
[drm:KMS:pid1482:intel_lvds_init] LVDS is not present in VBT
[drm:KMS:pid1482:intel_dp_i2c_init] i2c_init DPDDC-B
[drm:KMS:pid1482:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1482:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:KMS:pid1482:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1482:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:KMS:pid1482:intel_dp_i2c_init] i2c_init DPDDC-C
[drm:KMS:pid1482:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1482:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:KMS:pid1482:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1482:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:KMS:pid1482:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
[drm:KMS:pid1482:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
[drm:KMS:pid1482:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
[drm:KMS:pid1482:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
[drm:KMS:pid1482:intel_dp_i2c_init] i2c_init DPDDC-D
[drm:KMS:pid1482:ironlake_edp_panel_vdd_on] Turn eDP VDD on
[drm:KMS:pid1482:ironlake_edp_panel_vdd_on] PCH_PP_STATUS: 0x80000008 PCH_PP_CONTROL: 0xabcd000f
[drm:KMS:pid1482:intel_dp_i2c_aux_ch] aux_i2c nack
[drm:KMS:pid1482:intel_dp_i2c_aux_ch] aux_i2c nack
[drm:KMS:pid1482:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1
[drm:KMS:pid1482:ironlake_edp_panel_vdd_on] Turn eDP VDD on
[drm:KMS:pid1482:ironlake_edp_panel_vdd_on] eDP VDD already on
[drm:KMS:pid1482:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1
[drm:KMS:pid1482:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d0000a, PP_OFF 0x1f407d0, PP_DIV 0x186906
[drm:KMS:pid1482:ironlake_edp_panel_vdd_on] Turn eDP VDD on
[drm:KMS:pid1482:ironlake_edp_panel_vdd_on] eDP VDD already on
[drm:KMS:pid1482:iic_dp_aux_xfer] dp_aux_xfer return 0
[drm:KMS:pid1482:iic_dp_aux_xfer] dp_aux_xfer return 0
[drm:KMS:pid1482:drm_edid_to_eld] ELD: no CEA Extension found
[drm:KMS:pid1482:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1
[drm:KMS:pid1482:intel_panel_get_backlight] get backlight PWM = 4794
drmn1: taking over the fictitious range 0xc0000000-0xe0000000
[drm:KMS:pid1482:init_status_page] render ring hws offset: 0x00000000
[drm:KMS:pid1482:init_status_page] bsd ring hws offset: 0x00022000
[drm:KMS:pid1482:init_status_page] blitter ring hws offset: 0x00043000
[drm:KMS:pid1482:create_default_context] Default HW context loaded
[drm:KMS:pid1482:i915_gem_context_init] HW context support initialized
[drm:KMS:pid1482:intel_prepare_ddi_buffers] Initializing DDI buffers for port A in DP mode
[drm:KMS:pid1482:intel_prepare_ddi_buffers] Initializing DDI buffers for port B in DP mode
[drm:KMS:pid1482:intel_prepare_ddi_buffers] Initializing DDI buffers for port C in DP mode
[drm:KMS:pid1482:intel_prepare_ddi_buffers] Initializing DDI buffers for port D in DP mode
[drm:KMS:pid1482:intel_prepare_ddi_buffers] Initializing DDI buffers for port E in FDI mode
[drm:KMS:pid1482:intel_modeset_setup_hw_state] [CRTC:3] hw state readout: enabled
[drm:KMS:pid1482:intel_modeset_setup_hw_state] [CRTC:5] hw state readout: disabled
[drm:KMS:pid1482:intel_modeset_setup_hw_state] [CRTC:7] hw state readout: disabled
[drm:KMS:pid1482:intel_ddi_get_crtc_pll] Pipe A connected to port D using clock 0x80000000
[drm:KMS:pid1482:intel_modeset_setup_hw_state] [ENCODER:10:DAC-10] hw state readout: disabled, pipe=0
[drm:KMS:pid1482:intel_modeset_setup_hw_state] [ENCODER:11:TMDS-11] hw state readout: disabled, pipe=0
[drm:KMS:pid1482:intel_modeset_setup_hw_state] [ENCODER:16:TMDS-16] hw state readout: disabled, pipe=0
[drm:KMS:pid1482:intel_modeset_setup_hw_state] [ENCODER:19:TMDS-19] hw state readout: enabled, pipe=0
[drm:KMS:pid1482:intel_modeset_setup_hw_state] [CONNECTOR:21:eDP-1] hw state readout: enabled
[drm:KMS:pid1482:intel_modeset_setup_hw_state] [CONNECTOR:9:VGA-1] hw state readout: disabled
[drm:KMS:pid1482:intel_modeset_setup_hw_state] [CONNECTOR:12:HDMI-A-1] hw state readout: disabled
[drm:KMS:pid1482:intel_modeset_setup_hw_state] [CONNECTOR:15:DP-1] hw state readout: disabled
[drm:KMS:pid1482:intel_modeset_setup_hw_state] [CONNECTOR:17:HDMI-A-2] hw state readout: disabled
[drm:KMS:pid1482:intel_modeset_setup_hw_state] [CONNECTOR:18:DP-2] hw state readout: disabled
[drm:KMS:pid1482:intel_modeset_setup_hw_state] [CONNECTOR:20:HDMI-A-3] hw state readout: disabled
[drm:KMS:pid1482:intel_connector_check_state] [CONNECTOR:21:eDP-1]
[drm:KMS:pid1482:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:KMS:pid1482:intel_modeset_check_state] [ENCODER:11:TMDS-11]
[drm:KMS:pid1482:intel_modeset_check_state] [ENCODER:16:TMDS-16]
[drm:KMS:pid1482:intel_modeset_check_state] [ENCODER:19:TMDS-19]
[drm:KMS:pid1482:intel_modeset_check_state] [CRTC:3]
[drm:KMS:pid1482:intel_modeset_check_state] [CRTC:5]
[drm:KMS:pid1482:intel_modeset_check_state] [CRTC:7]
[drm:KMS:pid1482:intel_crt_reset] pch crt adpa set to 0xf40000
[drm:pid1482:drm_irq_install] irq=269
info: [drm] Connector eDP-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.eDP-1
info: [drm] - kern.vt.fb.default_mode
[drm:KMS:pid1482:drm_fb_helper_parse_command_line] cmdline mode for connector eDP-1 1920x1080 at 60Hz
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.VGA-1
info: [drm] - kern.vt.fb.default_mode
[drm:KMS:pid1482:drm_fb_helper_parse_command_line] cmdline mode for connector VGA-1 1920x1080 at 60Hz
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-1
info: [drm] - kern.vt.fb.default_mode
[drm:KMS:pid1482:drm_fb_helper_parse_command_line] cmdline mode for connector HDMI-A-1 1920x1080 at 60Hz
info: [drm] Connector DP-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-1
info: [drm] - kern.vt.fb.default_mode
[drm:KMS:pid1482:drm_fb_helper_parse_command_line] cmdline mode for connector DP-1 1920x1080 at 60Hz
info: [drm] Connector HDMI-A-2: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-2
info: [drm] - kern.vt.fb.default_mode
[drm:KMS:pid1482:drm_fb_helper_parse_command_line] cmdline mode for connector HDMI-A-2 1920x1080 at 60Hz
info: [drm] Connector DP-2: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-2
info: [drm] - kern.vt.fb.default_mode
[drm:KMS:pid1482:drm_fb_helper_parse_command_line] cmdline mode for connector DP-2 1920x1080 at 60Hz
info: [drm] Connector HDMI-A-3: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-3
info: [drm] - kern.vt.fb.default_mode
[drm:KMS:pid1482:drm_fb_helper_parse_command_line] cmdline mode for connector HDMI-A-3 1920x1080 at 60Hz
[drm:KMS:pid1482:drm_helper_probe_single_connector_modes] [CONNECTOR:21:eDP-1]
[drm:KMS:pid1482:intel_dp_detect] DPCD: 12 0A FF 41 00 00 00 00 00 00 00 00 00 0B 00
[drm:KMS:pid1482:drm_edid_to_eld] ELD: no CEA Extension found
[drm:KMS:pid1482:drm_helper_probe_single_connector_modes] [CONNECTOR:21:eDP-1] probed modes :
[drm:KMS:pid1482:drm_mode_debug_printmodeline] Modeline 26:"1920x1080" 60 140000 1920 1968 2068 2100 1080 1083 1084 1110 0x48 0xa
[drm:KMS:pid1482:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
[drm:KMS:pid1482:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
[drm:KMS:pid1482:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[drm:KMS:pid1482:intel_crt_detect] CRT not detected via hotplug
[drm:KMS:pid1482:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid1482:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6
[drm:KMS:pid1482:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid1482:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6
[drm:KMS:pid1482:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid1482:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6
[drm:KMS:pid1482:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid1482:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6
[drm:KMS:pid1482:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid1482:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6
[drm:KMS:pid1482:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[drm:KMS:pid1482:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] disconnected
[drm:KMS:pid1482:drm_helper_probe_single_connector_modes] [CONNECTOR:12:HDMI-A-1]
info: [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[drm:KMS:pid1482:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
[drm:KMS:pid1482:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
[drm:KMS:pid1482:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
[drm:KMS:pid1482:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
[drm:KMS:pid1482:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
[drm:KMS:pid1482:drm_helper_probe_single_connector_modes] [CONNECTOR:12:HDMI-A-1] disconnected
[drm:KMS:pid1482:drm_helper_probe_single_connector_modes] [CONNECTOR:15:DP-1]
[drm:KMS:pid1482:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1482:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1482:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1482:intel_dp_detect] DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[drm:KMS:pid1482:drm_helper_probe_single_connector_modes] [CONNECTOR:15:DP-1] disconnected
[drm:KMS:pid1482:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-2]
[drm:KMS:pid1482:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[drm:KMS:pid1482:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6
[drm:KMS:pid1482:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[drm:KMS:pid1482:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6
[drm:KMS:pid1482:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[drm:KMS:pid1482:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6
[drm:KMS:pid1482:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[drm:KMS:pid1482:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6
[drm:KMS:pid1482:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[drm:KMS:pid1482:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6
[drm:KMS:pid1482:drm_helper_probe_single_connector_modes] [CONNECTOR:17:HDMI-A-2] disconnected
[drm:KMS:pid1482:drm_helper_probe_single_connector_modes] [CONNECTOR:18:DP-2]
[drm:KMS:pid1482:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1482:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1482:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1482:intel_dp_detect] DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[drm:KMS:pid1482:drm_helper_probe_single_connector_modes] [CONNECTOR:18:DP-2] disconnected
[drm:KMS:pid1482:drm_helper_probe_single_connector_modes] [CONNECTOR:20:HDMI-A-3]
info: [drm] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6
[drm:KMS:pid1482:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
[drm:KMS:pid1482:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
[drm:KMS:pid1482:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
[drm:KMS:pid1482:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
[drm:KMS:pid1482:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
[drm:KMS:pid1482:drm_helper_probe_single_connector_modes] [CONNECTOR:20:HDMI-A-3] disconnected
[drm:KMS:pid1482:drm_setup_crtcs]
[drm:KMS:pid1482:drm_enable_connectors] connector 21 enabled? yes
[drm:KMS:pid1482:drm_enable_connectors] connector 9 enabled? no
[drm:KMS:pid1482:drm_enable_connectors] connector 12 enabled? no
[drm:KMS:pid1482:drm_enable_connectors] connector 15 enabled? no
[drm:KMS:pid1482:drm_enable_connectors] connector 17 enabled? no
[drm:KMS:pid1482:drm_enable_connectors] connector 18 enabled? no
[drm:KMS:pid1482:drm_enable_connectors] connector 20 enabled? no
[drm:KMS:pid1482:drm_target_preferred] looking for cmdline mode on connector 21
[drm:KMS:pid1482:drm_target_preferred] found mode 1920x1080
[drm:KMS:pid1482:drm_setup_crtcs] picking CRTCs for 8192x8192 config
[drm:KMS:pid1482:drm_setup_crtcs] desired mode 1920x1080 set on crtc 3
[drm:KMS:pid1482:intelfb_create] allocated 1920x1080 (s 24bits) fb: 0x00074000, bo 0xfffff80145bdc400
fbd1 on drmn1
VT: Replacing driver "vga" with new "fb".
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:3] [FB:27] #connectors=1 (x y) (0 0)
[drm:KMS:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set
[drm:KMS:pid0:intel_set_config_compute_mode_changes] modes are different, full mode set
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 22:"1920x1080" 60 140000 1920 1968 2068 2100 1080 1083 1084 1110 0x48 0xa
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:21:eDP-1] to [CRTC:3]
[drm:KMS:pid0:intel_crtc_set_config] attempting to set mode from userspace
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 22:"1920x1080" 60 140000 1920 1968 2068 2100 1080 1083 1084 1110 0x48 0xa
[drm:KMS:pid0:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[drm:KMS:pid0:intel_dp_mode_fixup] DP link computation with max lane count 2 max bw 0a pixel clock 140000KHz
[drm:KMS:pid0:intel_dp_mode_fixup] DP link bw 0a lane count 2 clock 270000 bpp 24
[drm:KMS:pid0:intel_dp_mode_fixup] DP link bw required 336000 available 432000
[drm:KMS:pid0:intel_modeset_adjusted_mode] [CRTC:3]
[drm:KMS:pid0:intel_panel_actually_set_backlight] set backlight PWM = 0
[drm:KMS:pid0:ironlake_edp_backlight_off]
info: [drm] Initialized i915 1.6.0 20080730 for drmn1 on minor 1
[drm:pid0:drm_calc_vbltimestamp_from_scanoutpos] crtc 0: Noop due to uninitialized mode.
[drm:KMS:pid0:ironlake_edp_panel_vdd_on] Turn eDP VDD on
[drm:KMS:pid0:ironlake_edp_panel_vdd_on] eDP VDD already on
[drm:KMS:pid0:ironlake_edp_panel_off] Turn eDP power off
[drm:KMS:pid0:ironlake_wait_panel_off] Wait for panel power off time
[drm:KMS:pid0:ironlake_wait_panel_status] mask b000000f value 00000000 status 80000008 control abcd0000
[drm:pid0:drm_vblank_get] enabling vblank on crtc 0, ret: -22
[drm:KMS:pid0:intel_ddi_put_crtc_pll] Disabling WRPLL 1
[drm:KMS:pid0:intel_choose_pipe_bpp_dither] clamping display bpc (was -1) to EDID reported max of 6
[drm:KMS:pid0:intel_choose_pipe_bpp_dither] setting pipe bpc to 8 (max display bpc 6)
[drm:KMS:pid0:haswell_crtc_mode_set] Mode for pipe 0:
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 22:"1920x1080" 60 140000 1920 1968 2068 2100 1080 1083 1084 1110 0x48 0xa
[drm:KMS:pid0:ironlake_update_plane] Writing base 00074000 00000000 0 0 7680
[drm:KMS:pid0:intel_crtc_mode_set] [ENCODER:19:TMDS-19] set [MODE:22:1920x1080]
[drm:KMS:pid0:intel_ddi_mode_set] Preparing DDI mode for Haswell on port D, pipe A
[drm:KMS:pid0:sandybridge_update_wm] FIFO watermarks For pipe A - plane 16, cursor: 6
[drm:KMS:pid0:ironlake_edp_panel_vdd_on] Turn eDP VDD on
[drm:KMS:pid0:ironlake_wait_panel_power_cycle] Wait for panel power cycle
[drm:KMS:pid0:ironlake_wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
[drm:KMS:pid0:ironlake_edp_panel_vdd_on] PCH_PP_STATUS: 0x00000000 PCH_PP_CONTROL: 0xabcd0008
[drm:KMS:pid0:ironlake_edp_panel_vdd_on] eDP was not running
[drm:KMS:pid0:ironlake_edp_panel_on] Turn eDP power on
[drm:KMS:pid0:ironlake_wait_panel_power_cycle] Wait for panel power cycle
[drm:KMS:pid0:ironlake_wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
[drm:KMS:pid0:ironlake_wait_panel_on] Wait for panel power on
[drm:KMS:pid0:ironlake_wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
[drm:KMS:pid0:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1
[drm:KMS:pid0:ironlake_panel_vdd_off_sync] PCH_PP_STATUS: 0x80000008 PCH_PP_CONTROL: 0xabcd0003
[drm:KMS:pid0:intel_dp_start_link_train] training pattern 1 signal levels 00000000
[drm:KMS:pid0:intel_dp_start_link_train] training pattern 1 signal levels 04000000
[drm:KMS:pid0:intel_dp_start_link_train] training pattern 1 signal levels 04000000
[drm:KMS:pid0:intel_dp_start_link_train] clock recovery OK
[drm:KMS:pid0:intel_dp_complete_link_train] Channel EQ done. DP Training successfull
[drm:KMS:pid0:ironlake_wait_for_vblank] vblank wait timed out
[drm:KMS:pid0:ironlake_wait_for_vblank] vblank wait timed out
[drm:KMS:pid0:ironlake_edp_backlight_on]
[drm:KMS:pid0:intel_panel_actually_set_backlight] set backlight PWM = 4794
[drm:KMS:pid0:ironlake_wait_for_vblank] vblank wait timed out
[drm:pid0:drm_calc_timestamping_constants] crtc 3: hwmode: htotal 2100, vtotal 1110, vdisplay 1080
[drm:pid0:drm_calc_timestamping_constants] crtc 3: clock 270000 kHz framedur 8632470 linedur 7777, pixeldur 3
[drm:KMS:pid0:intel_ddi_get_hw_state] No pipe for ddi port 3 found
[drm:KMS:pid0:intel_connector_check_state] [CONNECTOR:21:eDP-1]
[drm:KMS:pid0:intel_ddi_get_hw_state] No pipe for ddi port 3 found
error: [drm:pid0:intel_connector_check_state] *ERROR* encoder active on the wrong pipe
[drm:KMS:pid0:intel_ddi_get_hw_state] No pipe for ddi port 3 found
[drm:KMS:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:KMS:pid0:intel_modeset_check_state] [ENCODER:11:TMDS-11]
[drm:KMS:pid0:intel_modeset_check_state] [ENCODER:16:TMDS-16]
[drm:KMS:pid0:intel_modeset_check_state] [ENCODER:19:TMDS-19]
[drm:KMS:pid0:intel_ddi_get_hw_state] No pipe for ddi port 3 found
error: [drm:pid0:intel_modeset_check_state] *ERROR* active encoder's pipe doesn't match(expected 0, found 182665216)
[drm:KMS:pid0:intel_modeset_check_state] [CRTC:3]
[drm:KMS:pid0:intel_modeset_check_state] [CRTC:5]
[drm:KMS:pid0:intel_modeset_check_state] [CRTC:7]
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:5] [NOFB]
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:21:eDP-1] to [CRTC:3]
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:7] [NOFB]
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:21:eDP-1] to [CRTC:3]
[drm:KMS:pid0:i915_hotplug_work_func] running encoder hotplug functions
[drm:KMS:pid0:intel_dp_detect] DPCD: 12 0A FF 41 00 00 00 00 00 00 00 00 00 0B 00
[drm:KMS:pid0:drm_helper_hpd_irq_event] [CONNECTOR:21:eDP-1] status updated from 1 to 1
[drm:KMS:pid0:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[drm:KMS:pid0:intel_crt_detect] CRT not detected via hotplug
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6
[drm:KMS:pid0:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[drm:KMS:pid0:drm_helper_hpd_irq_event] [CONNECTOR:9:VGA-1] status updated from 2 to 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
[drm:KMS:pid0:drm_helper_hpd_irq_event] [CONNECTOR:12:HDMI-A-1] status updated from 2 to 2
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:intel_dp_detect] DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[drm:KMS:pid0:drm_helper_hpd_irq_event] [CONNECTOR:15:DP-1] status updated from 2 to 2
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6
[drm:KMS:pid0:drm_helper_hpd_irq_event] [CONNECTOR:17:HDMI-A-2] status updated from 2 to 2
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:intel_dp_detect] DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[drm:KMS:pid0:drm_helper_hpd_irq_event] [CONNECTOR:18:DP-2] status updated from 2 to 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
[drm:KMS:pid0:drm_helper_hpd_irq_event] [CONNECTOR:20:HDMI-A-3] status updated from 2 to 2
[drm:KMS:pid0:i915_hotplug_work_func] running encoder hotplug functions
[drm:KMS:pid0:intel_dp_detect] DPCD: 12 0A FF 41 00 00 00 00 00 00 00 00 00 0B 00
[drm:KMS:pid0:drm_helper_hpd_irq_event] [CONNECTOR:21:eDP-1] status updated from 1 to 1
[drm:KMS:pid0:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[drm:KMS:pid0:intel_crt_detect] CRT not detected via hotplug
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6
[drm:KMS:pid0:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[drm:KMS:pid0:drm_helper_hpd_irq_event] [CONNECTOR:9:VGA-1] status updated from 2 to 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
[drm:KMS:pid0:drm_helper_hpd_irq_event] [CONNECTOR:12:HDMI-A-1] status updated from 2 to 2
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:intel_dp_detect] DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[drm:KMS:pid0:drm_helper_hpd_irq_event] [CONNECTOR:15:DP-1] status updated from 2 to 2
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6
[drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6
[drm:KMS:pid0:drm_helper_hpd_irq_event] [CONNECTOR:17:HDMI-A-2] status updated from 2 to 2
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid0:intel_dp_detect] DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[drm:KMS:pid0:drm_helper_hpd_irq_event] [CONNECTOR:18:DP-2] status updated from 2 to 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
[drm:KMS:pid0:drm_helper_hpd_irq_event] [CONNECTOR:20:HDMI-A-3] status updated from 2 to 2
[drm:KMS:pid0:intel_enable_rc6] Haswell: only RC6 available
info: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:3] [FB:27] #connectors=1 (x y) (0 0)
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:21:eDP-1] to [CRTC:3]
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:5] [NOFB]
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:21:eDP-1] to [CRTC:3]
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:7] [NOFB]
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:21:eDP-1] to [CRTC:3]
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:3] [FB:27] #connectors=1 (x y) (0 0)
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:21:eDP-1] to [CRTC:3]
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:5] [NOFB]
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:21:eDP-1] to [CRTC:3]
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:7] [NOFB]
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:21:eDP-1] to [CRTC:3]
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:3] [FB:27] #connectors=1 (x y) (0 0)
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:21:eDP-1] to [CRTC:3]
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:5] [NOFB]
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:21:eDP-1] to [CRTC:3]
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:7] [NOFB]
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:21:eDP-1] to [CRTC:3]
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:3] [FB:27] #connectors=1 (x y) (0 0)
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:21:eDP-1] to [CRTC:3]
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:5] [NOFB]
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:21:eDP-1] to [CRTC:3]
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:7] [NOFB]
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:21:eDP-1] to [CRTC:3]
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:3] [FB:27] #connectors=1 (x y) (0 0)
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:21:eDP-1] to [CRTC:3]
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:5] [NOFB]
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:21:eDP-1] to [CRTC:3]
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:7] [NOFB]
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:21:eDP-1] to [CRTC:3]
\000
More information about the freebsd-x11
mailing list