support for ATI X200M (RS480M)

[Gour]

On Mon, 25 Nov 2013 14:33:16 +0100
Jean-Sébastien Pédron <dumbbell at FreeBSD.org> wrote:

> Can you boot without entering any graphical mode and, from an ssh
> connection, try to kldload "radeonkms"? If kldload returns, please
> post your dmesg. 


Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10-STABLE-p3 #19 5be16d0(stable/10): Thu Nov  7 20:29:44 EST 2013
    root at avenger:/usr/obj/pcbsd-build10/fbsd-source/src/sys/GENERIC amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: AMD E-350 Processor (1596.63-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x500f10  Family = 0x14  Model = 0x1  Stepping = 0
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
  TSC: P-state invariant, performance statistics
real memory  = 4831838208 (4608 MB)
avail memory = 3711234048 (3539 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <LENOVO TP-8P   >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 2.1> irqs 0-23 on motherboard
random: <Software, Yarrow> initialized
kbd1 at kbdmux0
acpi0: <LENOVO TP-8P> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xe0000000-0xefffffff,0xf0300000-0xf033ffff irq 18 at device 1.0 on pci0
hdac0: <ATI (0x1314) HDA Controller> mem 0xf0344000-0xf0347fff irq 19 at device 1.1 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
pci2: <ACPI PCI bus> on pcib2
alc0: <Atheros AR8151 v2.0 PCIe Gigabit Ethernet> port 0x2000-0x207f mem 0xf0100000-0xf013ffff irq 18 at device 0.0 on pci2
alc0: 11776 Tx FIFO, 12032 Rx FIFO
alc0: Using 1 MSI message(s).
miibus0: <MII bus> on alc0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
alc0: Ethernet address: e8:9a:8f:8a:e2:e5
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <unknown> at device 0.0 (no driver attached)
ahci0: <ATI IXP700 AHCI SATA controller> port 0x4118-0x411f,0x4124-0x4127,0x4110-0x4117,0x4120-0x4123,0x4100-0x410f mem 0xf034a000-0xf034a3ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.20 with 1 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf0349000-0xf0349fff irq 18 at device 18.0 on pci0
usbus0 on ohci0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf034a500-0xf034a5ff irq 17 at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf0348000-0xf0348fff irq 18 at device 19.0 on pci0
usbus2 on ohci1
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf034a400-0xf034a4ff irq 17 at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
hdac1: <ATI SB600 HDA Controller> mem 0xf0340000-0xf0343fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci4: <ACPI PCI bus> on pcib4
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Conexant CX20590 HDA CODEC> at cad 0 on hdac1
hdaa1: <Conexant CX20590 Audio Function Group> at nid 1 on hdacc1
pcm1: <Conexant CX20590 (Analog)> at nid 31 and 27 on hdaa1
pcm2: <Conexant CX20590 (Analog)> at nid 25 and 35 on hdaa1
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen2.1: <ATI> at usbus2
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <ATI> at usbus1
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <ATI> at usbus0
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen3.1: <ATI> at usbus3
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <HITACHI HTS723232A7A364 EC2ZB70B> ATA-8 SATA 2.x device
ada0: Serial Number E3834563J7HLBN
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
Netvsc initializing... SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1596633540 Hz quality 800
uhub0: 5 ports with 5 removable, self powered
uhub2: 5 ports with 5 removable, self powered
Root mount waiting for: usbus3 usbus1
Root mount waiting for: usbus3 usbus1
uhub1: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
Root mount waiting for: usbus3 usbus1
ugen1.2: <Ralink> at usbus1
ugen3.2: <SuYin> at usbus3
Root mount waiting for: usbus1
ugen1.3: <USBest Technology> at usbus1
umass0: <USBest Technology USB Mass Storage Device, class 0/0, rev 2.00/1.00, addr 3> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x0100
umass0:1:0:-1: Attached to scbus1
da0 at umass-sim0 bus 0 scbus1 target 0 lun 0
da0: <Ut163 USB2FlashStorage 0.00> Removable Direct Access SCSI-2 device 
da0: Serial Number 0000000000028E
da0: 40.000MB/s transfers
da0: 7711MB (15794175 512 byte sectors: 255H 63S/T 983C)
da0: quirks=0x2<NO_6_BYTE>
Root mount waiting for: usbus1
Trying to mount root from cd9660:/dev/iso9660/PCBSD_INSTALL []...
ugen0.2: <Broadcom Corp> at usbus0
md0.uzip: 43001 x 65536 blocks
ubt0: <Broadcom Corp Broadcom Bluetooth Device, class 224/1, rev 2.00/7.48, addr 2> on usbus0
cryptosoft0: <software crypto> on motherboard
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
run0: <Ralink 11n Adapter, class 0/0, rev 2.00/1.01, addr 2> on usbus1
run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address 1c:af:f7:6e:c5:d4
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
info: [drm] Initialized drm 1.1.0 20060810
drmn0: <Wrestler [Radeon HD 6310]> on vgapci0
info: [drm] MSI enabled 1 message(s)
info: [drm] RADEON_IS_PCIE
info: [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x17AA:0x21EC).
info: [drm] register mmio base: 0xF0300000
info: [drm] register mmio size: 262144
info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
info: [drm] radeon_atrm_get_bios: IGP card detected, skipping this method...
info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND
info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
info: [drm] igp_read_bios_from_vram: VRAM base address: 0xe0000000
info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800e0000000 (262144 bytes)
info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x5A07
info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
info: [drm] igp_read_bios_from_vram: VRAM base address: 0xe0000000
info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800e0000000 (262144 bytes)
info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x5A07
error: [drm:pid2127:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
drmn0: error: Fatal error during GPU init
info: [drm] radeon: finishing device.
[TTM] Memory type 2 has not been initialized
device_attach: drmn0 attach returned 22


Any hint?


Sincerely,
Gour

-- 
For him who has conquered the mind, the mind is the best of 
friends; but for one who has failed to do so, his mind will 
remain the greatest enemy.

http://www.atmarama.net | Hlapicina (Croatia) | GPG: 52B5C810
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20131125/47ea1632/attachment.sig>