[PREVIEW] Nouveau on FreeBSD (Take 2)
Robert Noland
rnoland at FreeBSD.org
Wed Mar 25 10:16:04 PDT 2009
On Wed, 2009-03-25 at 16:48 +0100, Gustau Perez wrote:
> >> Hi.
> >>
> >> using git version of both libdrm and xf86-video-nouveau I've been able
> >> to start gnome. My card is a NVS 135M. Seems quite stable (i'm using it
> >> right now).The only thing is that switching from one application to
> >> another felt a llitle slow.
> >>
> >> Using composition in metacity seems to work to some extend. I've
> >> experienced some problems (not always, sometimes it works and sometimes
> >> it doesn't) with vlc about bad window request (if I remember well).
> >> Avant-window-navigator (I've ported it and still testing) tries to start
> >> as it detects composition support, but can't proceed.
> >>
> >> Do you want my xorg log ?
> >>
> >
> > Sure.
> >
>
> Hi Robert,
>
> Here I'm attaching both dmesg and Xorg.log of a system where a NV50
> is detected but can't work. It is a NVS 290. I'm using a brand new
> xorg.conf file generated via Xorg --configure, just replacing nv with
> nouveau. The system is unable to proceed. I'm using current AMD64. I
> think the problem is that I'm using the first patchset you sent to the
> list. If this is the case, sorry :)
It does look like the first patchset, which won't work on NV50.
> I'll send my laptop's Xorg.log file (not now, in a while) which seems
> to work quite well. Haven't tried dual head with xrandr, I think it is
> supposed to work to some extend. My screensaver (pacman) argues about
> missing GLX, I suppose it is normal in the current state of the driver.
> Anyway, will inform of any progress :)
GLX should work, though it is using swrast as there is no released (or
working, yet) hardware 3d for NV50.
> Greets,
>
> Gus
>
> plain text document attachment (dmesg.txt)
> Copyright (c) 1992-2009 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 8.0-CURRENT #2: Wed Mar 25 15:45:56 CET 2009
> root at telem2-1proves.upc.es:/usr/obj/usr/src/sys/CUSTOM
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz (2660.00-MHz K8-class CPU)
> Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Features2=0x8e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
> AMD Features=0x20100800<SYSCALL,NX,LM>
> AMD Features2=0x1<LAHF>
> TSC: P-state invariant
> Cores per package: 2
> usable memory = 4211896320 (4016 MB)
> avail memory = 4050989056 (3863 MB)
> ACPI APIC Table: <DELL B9K >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> ioapic0: Changing APIC ID to 8
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> lapic0: Forcing LINT1 to edge trigger
> kbd1 at kbdmux0
> acpi0: <DELL B9K > on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 900
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> vgapci0: <VGA-compatible display> port 0xdc80-0xdcff mem 0xfc000000-0xfcffffff,0xd0000000-0xdfffffff,0xfa000000-0xfbffffff irq 16 at device 0.0 on pci1
> pcib2: <PCI-PCI bridge> irq 16 at device 6.0 on pci0
> pci2: <PCI bus> on pcib2
> uhci0: <Intel 82801I (ICH9) USB controller> port 0xff20-0xff3f irq 16 at device 26.0 on pci0
> uhci0: [ITHREAD]
> uhci0: LegSup = 0x0f10
> usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
> uhci1: <Intel 82801I (ICH9) USB controller> port 0xff00-0xff1f irq 17 at device 26.1 on pci0
> uhci1: [ITHREAD]
> uhci1: LegSup = 0x0f10
> usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
> uhci2: <Intel 82801I (ICH9) USB controller> port 0xecc0-0xecdf irq 22 at device 26.2 on pci0
> uhci2: [ITHREAD]
> uhci2: LegSup = 0x2f00
> usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
> ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfdffbc00-0xfdffbfff irq 22 at device 26.7 on pci0
> ehci0: [ITHREAD]
> usbus3: waiting for BIOS to give up control
> usbus3: EHCI version 1.0
> usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
> pci0: <multimedia, HDA> at device 27.0 (no driver attached)
> pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
> pci4: <ACPI PCI bus> on pcib4
> bge0: <Broadcom NetLink Gigabit Ethernet Controller, ASIC rev. 0xb002> mem 0xf9ef0000-0xf9efffff irq 17 at device 0.0 on pci4
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5787 10/100/1000baseTX PHY> PHY 1 on miibus0
> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
> bge0: Ethernet address: 00:22:19:12:de:fe
> bge0: [ITHREAD]
> uhci3: <Intel 82801I (ICH9) USB controller> port 0xff80-0xff9f irq 23 at device 29.0 on pci0
> uhci3: [ITHREAD]
> uhci3: LegSup = 0x001b
> usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
> uhci4: <Intel 82801I (ICH9) USB controller> port 0xff60-0xff7f irq 17 at device 29.1 on pci0
> uhci4: [ITHREAD]
> uhci4: LegSup = 0x0010
> usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
> uhci5: <Intel 82801I (ICH9) USB controller> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
> uhci5: [ITHREAD]
> uhci5: LegSup = 0x0010
> usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
> ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xff980800-0xff980bff irq 23 at device 29.7 on pci0
> ehci1: [ITHREAD]
> usbus7: waiting for BIOS to give up control
> usbus7: timed out waiting for BIOS
> usbus7: EHCI version 1.0
> usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
> pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci5: <ACPI PCI bus> on pcib5
> xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xccc0-0xccff irq 16 at device 4.0 on pci5
> miibus1: <MII bus> on xl0
> nsphy0: <DP83840 10/100 media interface> PHY 24 on miibus1
> nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> xl0: Ethernet address: 00:60:08:65:2f:e9
> xl0: [ITHREAD]
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel AHCI controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf mem 0xff970000-0xff9707ff irq 20 at device 31.2 on pci0
> atapci0: [ITHREAD]
> atapci0: AHCI Version 01.20 controller with 6 ports PM not supported
> ata2: <ATA channel 0> on atapci0
> ata2: [ITHREAD]
> ata3: <ATA channel 1> on atapci0
> ata3: [ITHREAD]
> ata4: <ATA channel 2> on atapci0
> ata4: [ITHREAD]
> ata5: <ATA channel 3> on atapci0
> ata5: [ITHREAD]
> ata6: <ATA channel 4> on atapci0
> ata6: [ITHREAD]
> ata7: <ATA channel 5> on atapci0
> ata7: [ITHREAD]
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> ppc0: [ITHREAD]
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> plip0: [ITHREAD]
> lpt0: <Printer> on ppbus0
> lpt0: [ITHREAD]
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> uart0: [FILTER]
> cpu0: <ACPI CPU> on acpi0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 6160a1706000a17
> device_attach: est0 attach returned 6
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> cpu1: <ACPI CPU> on acpi0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 6160a1706000a17
> device_attach: est1 attach returned 6
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcefff,0xcf000-0xd0fff,0xd1000-0xd37ff,0xd3800-0xd3fff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounters tick every 1.000 msec
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 12Mbps Full Speed USB v1.0
> usbus3: 480Mbps High Speed USB v2.0
> usbus4: 12Mbps Full Speed USB v1.0
> usbus5: 12Mbps Full Speed USB v1.0
> usbus6: 12Mbps Full Speed USB v1.0
> usbus7: 480Mbps High Speed USB v2.0
> ad4: 238418MB <SAMSUNG HD251HJ 1AC01113> at ata2-master SATA300
> ugen0.1: <Intel> at usbus0
> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> ugen1.1: <Intel> at usbus1
> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> ugen2.1: <Intel> at usbus2
> uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> ugen3.1: <Intel> at usbus3
> uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
> ugen4.1: <Intel> at usbus4
> uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> ugen5.1: <Intel> at usbus5
> uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
> ugen6.1: <Intel> at usbus6
> uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
> ugen7.1: <Intel> at usbus7
> uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
> GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s).
> acd0: DVDROM <TSSTcorpDVD-ROM TS-H353B/D500> at ata3-master SATA150
> lapic1: Forcing LINT1 to edge trigger
> SMP: AP CPU #1 Launched!
> Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
> uhub0: 2 ports with 2 removable, self powered
> Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1
> uhub1: 2 ports with 2 removable, self powered
> Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2
> uhub2: 2 ports with 2 removable, self powered
> Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3
> uhub4: 2 ports with 2 removable, self powered
> Root mount waiting for: usbus7 usbus6 usbus5 usbus3
> uhub5: 2 ports with 2 removable, self powered
> Root mount waiting for: usbus7 usbus6 usbus3
> uhub6: 2 ports with 2 removable, self powered
> Root mount waiting for: usbus7 usbus3
> Root mount waiting for: usbus7 usbus3
> Root mount waiting for: usbus7 usbus3
> uhub3: 6 ports with 6 removable, self powered
> uhub7: 6 ports with 6 removable, self powered
> Root mount waiting for: usbus3
> Root mount waiting for: usbus3
> ugen3.2: <Kingston> at usbus3
> umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/2.00, addr 2> on usbus3
> umass0: SCSI over Bulk-Only; quirks = 0x0000
> ugen0.2: <Microsoft> at usbus0
> ums0: <Microsoft Basic Optical Mouse, class 0/0, rev 1.10/0.00, addr 2> on usbus0
> ums0: 3 buttons and [XYZ] coordinates
> Root mount waiting for: usbus3
> umass0:0:0:-1: Attached to scbus0
> Trying to mount root from ufs:/dev/ad4s1a
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device
> da0: 40.000MB/s transfers
> da0: 7782MB (15937536 512 byte sectors: 255H 63S/T 992C)
> GEOM_LABEL: Label for provider da0s1 is msdosfs/KING8GB.
> logo_saver: the console does not support M_VGA_CG320
> module_register_init: MOD_LOAD (logo_saver, 0xffffffff80e22010, 0) error 19
> bge0: link state changed to UP
> drm0: <NVidia Display Adapter> on vgapci0
> info: [drm] MSI enabled 1 message(s)
> info: [drm] Detected an NV50 generation card (0x086f00a2)
> vgapci0: child drm0 requested pci_enable_busmaster
> info: [drm] Initialized nouveau 0.0.12 20060213
> pid 27952 (Xorg), uid 0: exited on signal 6 (core dumped)
> pid 28004 (Xorg), uid 0: exited on signal 6 (core dumped)
> error: [drm:pid28035:drm_alloc_resource] *ERROR* Couldn't find resource 0x2
> error: [drm:pid28035:drm_alloc_resource] *ERROR* Couldn't find resource 0x2
> error: [drm:pid28035:drm_alloc_resource] *ERROR* Couldn't find resource 0x2
> drm0: [ITHREAD]
> info: [drm] Allocating FIFO number 1
> info: [drm] nouveau_fifo_alloc: initialised FIFO 1
> pid 28035 (Xorg), uid 0: exited on signal 6 (core dumped)
> info: [drm] nouveau_fifo_free: freeing fifo 1
> plain text document attachment (Xorg.0.log)
> X.Org X Server 1.5.3
> Release Date: 5 November 2008
> X Protocol Version 11, Revision 0
> Build Operating System: FreeBSD 8.0-CURRENT amd64
> Current Operating System: FreeBSD telem2-1proves.upc.es 8.0-CURRENT FreeBSD 8.0-CURRENT #2: Wed Mar 25 15:45:56 CET 2009 root at telem2-1proves.upc.es:/usr/obj/usr/src/sys/CUSTOM amd64
> Build Date: 25 March 2009 09:19:30AM
>
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 25 16:29:29 2009
> (++) Using config file: "/root/xorg.conf.new"
> (==) ServerLayout "X.org Configured"
> (**) |-->Screen "Screen0" (0)
> (**) | |-->Monitor "Monitor0"
> (**) | |-->Device "Card0"
> (**) |-->Input Device "Mouse0"
> (**) |-->Input Device "Keyboard0"
> (==) Automatically adding devices
> (==) Automatically enabling devices
> (==) Including the default font path /usr/local/lib/X11/fonts/misc/,/usr/local/lib/X11/fonts/TTF/,/usr/local/lib/X11/fonts/OTF,/usr/local/lib/X11/fonts/Type1/,/usr/local/lib/X11/fonts/100dpi/,/usr/local/lib/X11/fonts/75dpi/.
> (**) FontPath set to:
> /usr/local/lib/X11/fonts/misc/,
> /usr/local/lib/X11/fonts/TTF/,
> /usr/local/lib/X11/fonts/OTF,
> /usr/local/lib/X11/fonts/Type1/,
> /usr/local/lib/X11/fonts/100dpi/,
> /usr/local/lib/X11/fonts/75dpi/,
> /usr/local/lib/X11/fonts/misc/,
> /usr/local/lib/X11/fonts/TTF/,
> /usr/local/lib/X11/fonts/OTF,
> /usr/local/lib/X11/fonts/Type1/,
> /usr/local/lib/X11/fonts/100dpi/,
> /usr/local/lib/X11/fonts/75dpi/
> (**) ModulePath set to "/usr/local/lib/xorg/modules"
> (WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
> (WW) Disabling Mouse0
> (WW) Disabling Keyboard0
> (II) Loader magic: 0x671240
> (II) Module ABI versions:
> X.Org ANSI C Emulation: 0.4
> X.Org Video Driver: 4.1
> X.Org XInput driver : 2.1
> X.Org Server Extension : 1.1
> X.Org Font Renderer : 0.6
> (II) Loader running on freebsd
> (--) Using syscons driver with X support (version 2.0)
> (--) using VT number 9
>
> (--) PCI:*(0 at 1:0:0) nVidia Corporation Quadro NVS 290 rev 161, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc80/128, BIOS @ 0x????????/65536
> (II) System resource ranges:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
> (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
> (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
> (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
> (II) "record" will be loaded. This was enabled by default and also specified in the config file.
> (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
> (II) LoadModule: "extmod"
>
> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
> (II) Module extmod: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 1.1
> (II) Loading extension SHAPE
> (II) Loading extension MIT-SUNDRY-NONSTANDARD
> (II) Loading extension BIG-REQUESTS
> (II) Loading extension SYNC
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XC-MISC
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-Misc
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension TOG-CUP
> (II) Loading extension Extended-Visual-Information
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "record"
>
> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
> (II) Module record: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.13.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 1.1
> (II) Loading extension RECORD
> (II) LoadModule: "dbe"
>
> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
> (II) Module dbe: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 1.1
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "glx"
>
> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
> (II) Module glx: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> ABI class: X.Org Server Extension, version 1.1
> (==) AIGLX disabled
> (==) Exporting typical set of GLX visuals
> (II) Loading extension GLX
> (II) LoadModule: "xtrap"
>
> (II) Loading /usr/local/lib/xorg/modules/extensions//libxtrap.so
> (II) Module xtrap: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 1.1
> (II) Loading extension DEC-XTRAP
> (II) LoadModule: "dri"
>
> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
> (II) Module dri: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> ABI class: X.Org Server Extension, version 1.1
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "freetype"
>
> (II) Loading /usr/local/lib/xorg/modules/fonts//libfreetype.so
> (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
> compiled for 1.5.3, module version = 2.1.0
> Module class: X.Org Font Renderer
> ABI class: X.Org Font Renderer, version 0.6
> (II) Loading font FreeType
> (II) LoadModule: "nouveau"
>
> (II) Loading /usr/local/lib/xorg/modules/drivers//nouveau_drv.so
> (II) Module nouveau: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 0.0.10
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 4.1
> (II) NOUVEAU driver
> (II) NOUVEAU driver for NVIDIA chipset families :
> RIVA TNT (NV04)
> RIVA TNT2 (NV05)
> GeForce 256 (NV10)
> GeForce 2 (NV11, NV15)
> GeForce 4MX (NV17, NV18)
> GeForce 3 (NV20)
> GeForce 4Ti (NV25, NV28)
> GeForce FX (NV3x)
> GeForce 6 (NV4x)
> GeForce 7 (G7x)
> GeForce 8 (G8x)
> (II) Primary Device is: PCI 01 at 00:00:0
> (II) resource ranges after probing:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (--) NOUVEAU(0): Chipset: "NVIDIA NV86"
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
>
> (II) Loading /usr/local/lib/xorg/modules//libint10.so
> (II) Module int10: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> ABI class: X.Org Video Driver, version 4.1
> (II) NOUVEAU(0): Initializing int10
> (==) NOUVEAU(0): Write-combining range (0xa0000,0x20000) was already clear
> (==) NOUVEAU(0): Write-combining range (0xc0000,0x40000) was already clear
> (II) NOUVEAU(0): Primary V_BIOS segment is: 0xc000
> (==) NOUVEAU(0): Write-combining range (0x0,0x1000) was already clear
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 10, (OK)
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 10, (OK)
> drmOpenByBusid: Searching for BusID pci:0000:01:00.0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 10, (OK)
> drmOpenByBusid: drmOpenMinor returns 10
> drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
> (II) [drm] DRM interface version 1.2
> (II) [drm] DRM open master succeeded.
> (II) NOUVEAU(0): [drm] nouveau interface version: 0.0.12
> (--) NOUVEAU(0): [drm] kernel modesetting not available
> (--) NOUVEAU(0): VESA-HACK: Console VGA mode is 0x3
> (==) NOUVEAU(0): Depth 24, (==) framebuffer bpp 32
> (==) NOUVEAU(0): RGB weight 888
> (==) NOUVEAU(0): Default visual is TrueColor
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
>
> (II) Loading /usr/local/lib/xorg/modules//libvgahw.so
> (II) Module vgahw: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 0.1.0
> ABI class: X.Org Video Driver, version 4.1
> (==) NOUVEAU(0): Randr1.2 support enabled
> (==) NOUVEAU(0): Using HW cursor
> (--) NOUVEAU(0): Linear framebuffer at 0xD0000000
> (--) NOUVEAU(0): MMIO registers at 0xFC000000
> (II) NOUVEAU(0): Initial CRTC_OWNER is 0
> (II) NOUVEAU(0): Attempting to load BIOS image from PROM
> (II) NOUVEAU(0): ... appears to be valid
> (II) NOUVEAU(0): BIT BIOS found
> (II) NOUVEAU(0): Bios version 60.86.63.00
> (WW) NOUVEAU(0): TMDS table revision 2.0 not currently supported
> (II) NOUVEAU(0): Found Display Configuration Block version 4.0
> (!!) NOUVEAU(0): Raw DCB entry 0: 02011300 00000028
> (!!) NOUVEAU(0): Raw DCB entry 1: 01011302 00000010
> (!!) NOUVEAU(0): Raw DCB entry 2: 01000310 00000028
> (!!) NOUVEAU(0): Raw DCB entry 3: 02000312 00000010
> (!!) NOUVEAU(0): Raw DCB entry 4: 0000000e 00000000
> (--) NOUVEAU(0): Parsing VBIOS init table 0 at offset 0xBD9C
> (--) NOUVEAU(0): Parsing VBIOS init table 1 at offset 0xC106
> (--) NOUVEAU(0): Parsing VBIOS init table 2 at offset 0xCD47
> (--) NOUVEAU(0): Parsing VBIOS init table 3 at offset 0xCE39
> (--) NOUVEAU(0): Parsing VBIOS init table 4 at offset 0xD033
> (II) NOUVEAU(0): NV50DispPreInit is called.
> (--) NOUVEAU(0): DCB entry 0: type: 0, i2c_index: 0, heads: 3, bus: 1, or: 2
> (II) NOUVEAU(0): I2C bus "DVI-1" initialized.
> (II) NOUVEAU(0): DAC-1 attached with index 0 to DVI-1
> (--) NOUVEAU(0): DCB entry 1: type: 2, i2c_index: 0, heads: 3, bus: 1, or: 1
> (II) NOUVEAU(0): SOR-0 attached with index 1 to DVI-1
> (--) NOUVEAU(0): DCB entry 2: type: 0, i2c_index: 1, heads: 3, bus: 0, or: 1
> (II) NOUVEAU(0): I2C bus "DVI-0" initialized.
> (II) NOUVEAU(0): DAC-0 attached with index 0 to DVI-0
> (--) NOUVEAU(0): DCB entry 3: type: 2, i2c_index: 1, heads: 3, bus: 0, or: 2
> (II) NOUVEAU(0): SOR-1 attached with index 1 to DVI-0
> (II) NOUVEAU(0): Output DVI-0 using monitor section Monitor0
> (II) NOUVEAU(0): Output DVI-1 has no monitor section
> (II) NOUVEAU(0): nv50_output_detect is called.
> (II) NOUVEAU(0): NV50ConnectorDDCDetect is called.
> (II) NOUVEAU(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
> (II) NOUVEAU(0): I2C device "DVI-0:ddc2" removed.
> (II) NOUVEAU(0): Using bios provided load value of 340
> (--) NOUVEAU(0): No Load present on DAC-0
> (II) NOUVEAU(0): nv50_output_detect is called.
> (II) NOUVEAU(0): NV50ConnectorDDCDetect is called.
> (II) NOUVEAU(0): I2C device "DVI-1:ddc2" registered at address 0xA0.
> (II) NOUVEAU(0): Detected a Analog output on DVI-1
> (II) NOUVEAU(0): Found a suitable output, index 0
> (II) NOUVEAU(0): nv50_output_detect is called.
> (II) NOUVEAU(0): NV50ConnectorDDCDetect is called.
> (II) NOUVEAU(0): NV50ConnectorGetDDCModes is called.
> (II) NOUVEAU(0): EDID vendor "STN", prod id 5
> (II) NOUVEAU(0): DVI-1: preferred mode is 1024x768
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): nv50_output_mode_valid is called.
> (II) NOUVEAU(0): Output DVI-0 disconnected
> (II) NOUVEAU(0): Output DVI-1 connected
> (II) NOUVEAU(0): Using exact sizes for initial modes
> (II) NOUVEAU(0): Output DVI-1 using initial mode 1024x768
> (--) NOUVEAU(0): VideoRAM: 262144 kBytes
> (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
> (--) NOUVEAU(0): Virtual size is 1280x1280 (pitch 1280)
> (**) NOUVEAU(0): Driver mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
> (II) NOUVEAU(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
> (**) NOUVEAU(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
> (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
> (**) NOUVEAU(0): Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
> (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
> (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
> (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
> (**) NOUVEAU(0): Default mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
> (II) NOUVEAU(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
> (**) NOUVEAU(0): Driver mode "1024x768": 94.4 MHz (scaled from 0.0 MHz), 68.6 kHz, 85.0 Hz
> (II) NOUVEAU(0): Modeline "1024x768"x85.0 94.39 1024 1088 1200 1376 768 769 772 807 -hsync +vsync (68.6 kHz)
> (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
> (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
> (**) NOUVEAU(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
> (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
> (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
> (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
> (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
> (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
> (**) NOUVEAU(0): Driver mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 87.0 Hz (I)
> (II) NOUVEAU(0): Modeline "1024x768"x87.0 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz)
> (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
> (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
> (**) NOUVEAU(0): Driver mode "800x600": 56.5 MHz (scaled from 0.0 MHz), 53.5 kHz, 85.0 Hz
> (II) NOUVEAU(0): Modeline "800x600"x85.0 56.55 800 840 928 1056 600 601 604 630 -hsync +vsync (53.5 kHz)
> (**) NOUVEAU(0): Default mode "800x600": 56.3 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz
> (II) NOUVEAU(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
> (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
> (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
> (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
> (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
> (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
> (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
> (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
> (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
> (**) NOUVEAU(0): Default mode "700x525": 61.0 MHz (scaled from 0.0 MHz), 64.9 kHz, 60.0 Hz (D)
> (II) NOUVEAU(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz)
> (**) NOUVEAU(0): Default mode "640x512": 54.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
> (II) NOUVEAU(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz)
> (**) NOUVEAU(0): Default mode "640x480": 54.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz (D)
> (II) NOUVEAU(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz)
> (**) NOUVEAU(0): Default mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
> (II) NOUVEAU(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
> (**) NOUVEAU(0): Driver mode "640x480": 35.7 MHz (scaled from 0.0 MHz), 42.9 kHz, 85.0 Hz
> (II) NOUVEAU(0): Modeline "640x480"x85.0 35.71 640 672 736 832 480 481 484 505 -hsync +vsync (42.9 kHz)
> (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
> (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
> (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
> (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
> (**) NOUVEAU(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
> (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
> (**) NOUVEAU(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
> (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
> (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
> (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
> (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
> (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
> (**) NOUVEAU(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
> (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
> (**) NOUVEAU(0): Driver mode "720x400": 35.5 MHz (scaled from 0.0 MHz), 39.4 kHz, 87.8 Hz
> (II) NOUVEAU(0): Modeline "720x400"x87.8 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
> (**) NOUVEAU(0): Default mode "720x400": 35.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.0 Hz
> (II) NOUVEAU(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
> (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
> (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
> (**) NOUVEAU(0): Default mode "640x400": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.1 Hz
> (II) NOUVEAU(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
> (**) NOUVEAU(0): Default mode "576x432": 54.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz (D)
> (II) NOUVEAU(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz)
> (**) NOUVEAU(0): Default mode "640x350": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.1 Hz
> (II) NOUVEAU(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
> (**) NOUVEAU(0): Default mode "512x384": 47.2 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz (D)
> (II) NOUVEAU(0): Modeline "512x384"x85.0 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync (68.7 kHz)
> (**) NOUVEAU(0): Default mode "512x384": 39.4 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz (D)
> (II) NOUVEAU(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz)
> (**) NOUVEAU(0): Default mode "512x384": 37.5 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz (D)
> (II) NOUVEAU(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz)
> (**) NOUVEAU(0): Default mode "512x384": 32.5 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (D)
> (II) NOUVEAU(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz)
> (**) NOUVEAU(0): Default mode "416x312": 28.6 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.7 Hz (D)
> (II) NOUVEAU(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz)
> (**) NOUVEAU(0): Default mode "400x300": 28.1 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.3 Hz (D)
> (II) NOUVEAU(0): Modeline "400x300"x85.3 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync (53.7 kHz)
> (**) NOUVEAU(0): Default mode "400x300": 25.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz (D)
> (II) NOUVEAU(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz)
> (==) NOUVEAU(0): DPI set to (96, 96)
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
>
> (II) Loading /usr/local/lib/xorg/modules//libfb.so
> (II) Module fb: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> ABI class: X.Org ANSI C Emulation, version 0.4
> (II) Loading sub module "exa"
> (II) LoadModule: "exa"
>
> (II) Loading /usr/local/lib/xorg/modules//libexa.so
> (II) Module exa: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 2.4.0
> ABI class: X.Org Video Driver, version 4.1
> (II) Loading sub module "shadowfb"
> (II) LoadModule: "shadowfb"
>
> (II) Loading /usr/local/lib/xorg/modules//libshadowfb.so
> (II) Module shadowfb: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> ABI class: X.Org ANSI C Emulation, version 0.4
> (--) Depth 24 pixmap format is 32 bpp
> (II) do I need RAC? No, I don't.
> (II) resource ranges after preInit:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (==) NOUVEAU(0): Write-combining range (0xa0000,0x10000) was already clear
> (II) NOUVEAU(0): Allocated 128MiB VRAM for framebuffer + offscreen pixmaps, at offset 0x20000000
> (II) NOUVEAU(0): AGPGART: 512MiB available
> (EE) NOUVEAU(0): Unable to allocate GART memory
Yes, this appears to be the first patchset, which can't allocate the
GART on nv50.
robert.
> (II) NOUVEAU(0): [drm] Using the DRM lock SAREA also for drawables.
> (II) NOUVEAU(0): [drm] framebuffer handle = 0xd0000000
> (II) NOUVEAU(0): [drm] added 1 reserved context for kernel
> (II) NOUVEAU(0): X context handle = 0x1
> (II) NOUVEAU(0): [drm] installed DRM signal handler
--
Robert Noland <rnoland at FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090325/5cd6493a/attachment.pgp
More information about the freebsd-x11
mailing list