[PREVIEW] Nouveau on FreeBSD (Take 2)
Gustau Perez
gperez at entel.upc.edu
Wed Mar 25 08:50:42 PDT 2009
>> Hi.
>>
>> using git version of both libdrm and xf86-video-nouveau I've been able
>> to start gnome. My card is a NVS 135M. Seems quite stable (i'm using it
>> right now).The only thing is that switching from one application to
>> another felt a llitle slow.
>>
>> Using composition in metacity seems to work to some extend. I've
>> experienced some problems (not always, sometimes it works and sometimes
>> it doesn't) with vlc about bad window request (if I remember well).
>> Avant-window-navigator (I've ported it and still testing) tries to start
>> as it detects composition support, but can't proceed.
>>
>> Do you want my xorg log ?
>>
>
> Sure.
>
Hi Robert,
Here I'm attaching both dmesg and Xorg.log of a system where a NV50
is detected but can't work. It is a NVS 290. I'm using a brand new
xorg.conf file generated via Xorg --configure, just replacing nv with
nouveau. The system is unable to proceed. I'm using current AMD64. I
think the problem is that I'm using the first patchset you sent to the
list. If this is the case, sorry :)
I'll send my laptop's Xorg.log file (not now, in a while) which seems
to work quite well. Haven't tried dual head with xrandr, I think it is
supposed to work to some extend. My screensaver (pacman) argues about
missing GLX, I suppose it is normal in the current state of the driver.
Anyway, will inform of any progress :)
Greets,
Gus
-------------- next part --------------
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #2: Wed Mar 25 15:45:56 CET 2009
root at telem2-1proves.upc.es:/usr/obj/usr/src/sys/CUSTOM
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz (2660.00-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x8e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
Cores per package: 2
usable memory = 4211896320 (4016 MB)
avail memory = 4050989056 (3863 MB)
ACPI APIC Table: <DELL B9K >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <DELL B9K > on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xdc80-0xdcff mem 0xfc000000-0xfcffffff,0xd0000000-0xdfffffff,0xfa000000-0xfbffffff irq 16 at device 0.0 on pci1
pcib2: <PCI-PCI bridge> irq 16 at device 6.0 on pci0
pci2: <PCI bus> on pcib2
uhci0: <Intel 82801I (ICH9) USB controller> port 0xff20-0xff3f irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x0f10
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xff00-0xff1f irq 17 at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x0f10
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0xecc0-0xecdf irq 22 at device 26.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfdffbc00-0xfdffbfff irq 22 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: waiting for BIOS to give up control
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci4: <ACPI PCI bus> on pcib4
bge0: <Broadcom NetLink Gigabit Ethernet Controller, ASIC rev. 0xb002> mem 0xf9ef0000-0xf9efffff irq 17 at device 0.0 on pci4
miibus0: <MII bus> on bge0
brgphy0: <BCM5787 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:22:19:12:de:fe
bge0: [ITHREAD]
uhci3: <Intel 82801I (ICH9) USB controller> port 0xff80-0xff9f irq 23 at device 29.0 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x001b
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0xff60-0xff7f irq 17 at device 29.1 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x0010
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x0010
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xff980800-0xff980bff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: waiting for BIOS to give up control
usbus7: timed out waiting for BIOS
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xccc0-0xccff irq 16 at device 4.0 on pci5
miibus1: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> PHY 24 on miibus1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:60:08:65:2f:e9
xl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel AHCI controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf mem 0xff970000-0xff9707ff irq 20 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.20 controller with 6 ports PM not supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160a1706000a17
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160a1706000a17
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcefff,0xcf000-0xd0fff,0xd1000-0xd37ff,0xd3800-0xd3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ad4: 238418MB <SAMSUNG HD251HJ 1AC01113> at ata2-master SATA300
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s).
acd0: DVDROM <TSSTcorpDVD-ROM TS-H353B/D500> at ata3-master SATA150
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3
uhub4: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus6 usbus5 usbus3
uhub5: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus6 usbus3
uhub6: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Root mount waiting for: usbus3
Root mount waiting for: usbus3
ugen3.2: <Kingston> at usbus3
umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/2.00, addr 2> on usbus3
umass0: SCSI over Bulk-Only; quirks = 0x0000
ugen0.2: <Microsoft> at usbus0
ums0: <Microsoft Basic Optical Mouse, class 0/0, rev 1.10/0.00, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates
Root mount waiting for: usbus3
umass0:0:0:-1: Attached to scbus0
Trying to mount root from ufs:/dev/ad4s1a
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 7782MB (15937536 512 byte sectors: 255H 63S/T 992C)
GEOM_LABEL: Label for provider da0s1 is msdosfs/KING8GB.
logo_saver: the console does not support M_VGA_CG320
module_register_init: MOD_LOAD (logo_saver, 0xffffffff80e22010, 0) error 19
bge0: link state changed to UP
drm0: <NVidia Display Adapter> on vgapci0
info: [drm] MSI enabled 1 message(s)
info: [drm] Detected an NV50 generation card (0x086f00a2)
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] Initialized nouveau 0.0.12 20060213
pid 27952 (Xorg), uid 0: exited on signal 6 (core dumped)
pid 28004 (Xorg), uid 0: exited on signal 6 (core dumped)
error: [drm:pid28035:drm_alloc_resource] *ERROR* Couldn't find resource 0x2
error: [drm:pid28035:drm_alloc_resource] *ERROR* Couldn't find resource 0x2
error: [drm:pid28035:drm_alloc_resource] *ERROR* Couldn't find resource 0x2
drm0: [ITHREAD]
info: [drm] Allocating FIFO number 1
info: [drm] nouveau_fifo_alloc: initialised FIFO 1
pid 28035 (Xorg), uid 0: exited on signal 6 (core dumped)
info: [drm] nouveau_fifo_free: freeing fifo 1
-------------- next part --------------
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 8.0-CURRENT amd64
Current Operating System: FreeBSD telem2-1proves.upc.es 8.0-CURRENT FreeBSD 8.0-CURRENT #2: Wed Mar 25 15:45:56 CET 2009 root at telem2-1proves.upc.es:/usr/obj/usr/src/sys/CUSTOM amd64
Build Date: 25 March 2009 09:19:30AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 25 16:29:29 2009
(++) Using config file: "/root/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/local/lib/X11/fonts/misc/,/usr/local/lib/X11/fonts/TTF/,/usr/local/lib/X11/fonts/OTF,/usr/local/lib/X11/fonts/Type1/,/usr/local/lib/X11/fonts/100dpi/,/usr/local/lib/X11/fonts/75dpi/.
(**) FontPath set to:
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/,
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x671240
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on freebsd
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(--) PCI:*(0 at 1:0:0) nVidia Corporation Quadro NVS 290 rev 161, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc80/128, BIOS @ 0x????????/65536
(II) System resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX disabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "xtrap"
(II) Loading /usr/local/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "freetype"
(II) Loading /usr/local/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "nouveau"
(II) Loading /usr/local/lib/xorg/modules/drivers//nouveau_drv.so
(II) Module nouveau: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.0.10
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) NOUVEAU driver
(II) NOUVEAU driver for NVIDIA chipset families :
RIVA TNT (NV04)
RIVA TNT2 (NV05)
GeForce 256 (NV10)
GeForce 2 (NV11, NV15)
GeForce 4MX (NV17, NV18)
GeForce 3 (NV20)
GeForce 4Ti (NV25, NV28)
GeForce FX (NV3x)
GeForce 6 (NV4x)
GeForce 7 (G7x)
GeForce 8 (G8x)
(II) Primary Device is: PCI 01 at 00:00:0
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(--) NOUVEAU(0): Chipset: "NVIDIA NV86"
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/local/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) NOUVEAU(0): Initializing int10
(==) NOUVEAU(0): Write-combining range (0xa0000,0x20000) was already clear
(==) NOUVEAU(0): Write-combining range (0xc0000,0x40000) was already clear
(II) NOUVEAU(0): Primary V_BIOS segment is: 0xc000
(==) NOUVEAU(0): Write-combining range (0x0,0x1000) was already clear
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.2
(II) [drm] DRM open master succeeded.
(II) NOUVEAU(0): [drm] nouveau interface version: 0.0.12
(--) NOUVEAU(0): [drm] kernel modesetting not available
(--) NOUVEAU(0): VESA-HACK: Console VGA mode is 0x3
(==) NOUVEAU(0): Depth 24, (==) framebuffer bpp 32
(==) NOUVEAU(0): RGB weight 888
(==) NOUVEAU(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/local/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(==) NOUVEAU(0): Randr1.2 support enabled
(==) NOUVEAU(0): Using HW cursor
(--) NOUVEAU(0): Linear framebuffer at 0xD0000000
(--) NOUVEAU(0): MMIO registers at 0xFC000000
(II) NOUVEAU(0): Initial CRTC_OWNER is 0
(II) NOUVEAU(0): Attempting to load BIOS image from PROM
(II) NOUVEAU(0): ... appears to be valid
(II) NOUVEAU(0): BIT BIOS found
(II) NOUVEAU(0): Bios version 60.86.63.00
(WW) NOUVEAU(0): TMDS table revision 2.0 not currently supported
(II) NOUVEAU(0): Found Display Configuration Block version 4.0
(!!) NOUVEAU(0): Raw DCB entry 0: 02011300 00000028
(!!) NOUVEAU(0): Raw DCB entry 1: 01011302 00000010
(!!) NOUVEAU(0): Raw DCB entry 2: 01000310 00000028
(!!) NOUVEAU(0): Raw DCB entry 3: 02000312 00000010
(!!) NOUVEAU(0): Raw DCB entry 4: 0000000e 00000000
(--) NOUVEAU(0): Parsing VBIOS init table 0 at offset 0xBD9C
(--) NOUVEAU(0): Parsing VBIOS init table 1 at offset 0xC106
(--) NOUVEAU(0): Parsing VBIOS init table 2 at offset 0xCD47
(--) NOUVEAU(0): Parsing VBIOS init table 3 at offset 0xCE39
(--) NOUVEAU(0): Parsing VBIOS init table 4 at offset 0xD033
(II) NOUVEAU(0): NV50DispPreInit is called.
(--) NOUVEAU(0): DCB entry 0: type: 0, i2c_index: 0, heads: 3, bus: 1, or: 2
(II) NOUVEAU(0): I2C bus "DVI-1" initialized.
(II) NOUVEAU(0): DAC-1 attached with index 0 to DVI-1
(--) NOUVEAU(0): DCB entry 1: type: 2, i2c_index: 0, heads: 3, bus: 1, or: 1
(II) NOUVEAU(0): SOR-0 attached with index 1 to DVI-1
(--) NOUVEAU(0): DCB entry 2: type: 0, i2c_index: 1, heads: 3, bus: 0, or: 1
(II) NOUVEAU(0): I2C bus "DVI-0" initialized.
(II) NOUVEAU(0): DAC-0 attached with index 0 to DVI-0
(--) NOUVEAU(0): DCB entry 3: type: 2, i2c_index: 1, heads: 3, bus: 0, or: 2
(II) NOUVEAU(0): SOR-1 attached with index 1 to DVI-0
(II) NOUVEAU(0): Output DVI-0 using monitor section Monitor0
(II) NOUVEAU(0): Output DVI-1 has no monitor section
(II) NOUVEAU(0): nv50_output_detect is called.
(II) NOUVEAU(0): NV50ConnectorDDCDetect is called.
(II) NOUVEAU(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) NOUVEAU(0): I2C device "DVI-0:ddc2" removed.
(II) NOUVEAU(0): Using bios provided load value of 340
(--) NOUVEAU(0): No Load present on DAC-0
(II) NOUVEAU(0): nv50_output_detect is called.
(II) NOUVEAU(0): NV50ConnectorDDCDetect is called.
(II) NOUVEAU(0): I2C device "DVI-1:ddc2" registered at address 0xA0.
(II) NOUVEAU(0): Detected a Analog output on DVI-1
(II) NOUVEAU(0): Found a suitable output, index 0
(II) NOUVEAU(0): nv50_output_detect is called.
(II) NOUVEAU(0): NV50ConnectorDDCDetect is called.
(II) NOUVEAU(0): NV50ConnectorGetDDCModes is called.
(II) NOUVEAU(0): EDID vendor "STN", prod id 5
(II) NOUVEAU(0): DVI-1: preferred mode is 1024x768
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): Output DVI-0 disconnected
(II) NOUVEAU(0): Output DVI-1 connected
(II) NOUVEAU(0): Using exact sizes for initial modes
(II) NOUVEAU(0): Output DVI-1 using initial mode 1024x768
(--) NOUVEAU(0): VideoRAM: 262144 kBytes
(==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NOUVEAU(0): Virtual size is 1280x1280 (pitch 1280)
(**) NOUVEAU(0): Driver mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) NOUVEAU(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(**) NOUVEAU(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) NOUVEAU(0): Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(**) NOUVEAU(0): Default mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) NOUVEAU(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 94.4 MHz (scaled from 0.0 MHz), 68.6 kHz, 85.0 Hz
(II) NOUVEAU(0): Modeline "1024x768"x85.0 94.39 1024 1088 1200 1376 768 769 772 807 -hsync +vsync (68.6 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(**) NOUVEAU(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
(II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 87.0 Hz (I)
(II) NOUVEAU(0): Modeline "1024x768"x87.0 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz)
(**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
(II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 56.5 MHz (scaled from 0.0 MHz), 53.5 kHz, 85.0 Hz
(II) NOUVEAU(0): Modeline "800x600"x85.0 56.55 800 840 928 1056 600 601 604 630 -hsync +vsync (53.5 kHz)
(**) NOUVEAU(0): Default mode "800x600": 56.3 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz
(II) NOUVEAU(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
(II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) NOUVEAU(0): Default mode "700x525": 61.0 MHz (scaled from 0.0 MHz), 64.9 kHz, 60.0 Hz (D)
(II) NOUVEAU(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz)
(**) NOUVEAU(0): Default mode "640x512": 54.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
(II) NOUVEAU(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz)
(**) NOUVEAU(0): Default mode "640x480": 54.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz (D)
(II) NOUVEAU(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz)
(**) NOUVEAU(0): Default mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) NOUVEAU(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 35.7 MHz (scaled from 0.0 MHz), 42.9 kHz, 85.0 Hz
(II) NOUVEAU(0): Modeline "640x480"x85.0 35.71 640 672 736 832 480 481 484 505 -hsync +vsync (42.9 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(**) NOUVEAU(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(**) NOUVEAU(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
(II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NOUVEAU(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
(II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NOUVEAU(0): Driver mode "720x400": 35.5 MHz (scaled from 0.0 MHz), 39.4 kHz, 87.8 Hz
(II) NOUVEAU(0): Modeline "720x400"x87.8 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
(**) NOUVEAU(0): Default mode "720x400": 35.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.0 Hz
(II) NOUVEAU(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
(**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(**) NOUVEAU(0): Default mode "640x400": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.1 Hz
(II) NOUVEAU(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(**) NOUVEAU(0): Default mode "576x432": 54.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz (D)
(II) NOUVEAU(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz)
(**) NOUVEAU(0): Default mode "640x350": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.1 Hz
(II) NOUVEAU(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
(**) NOUVEAU(0): Default mode "512x384": 47.2 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz (D)
(II) NOUVEAU(0): Modeline "512x384"x85.0 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync (68.7 kHz)
(**) NOUVEAU(0): Default mode "512x384": 39.4 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz (D)
(II) NOUVEAU(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz)
(**) NOUVEAU(0): Default mode "512x384": 37.5 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz (D)
(II) NOUVEAU(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz)
(**) NOUVEAU(0): Default mode "512x384": 32.5 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (D)
(II) NOUVEAU(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz)
(**) NOUVEAU(0): Default mode "416x312": 28.6 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.7 Hz (D)
(II) NOUVEAU(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz)
(**) NOUVEAU(0): Default mode "400x300": 28.1 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.3 Hz (D)
(II) NOUVEAU(0): Modeline "400x300"x85.3 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync (53.7 kHz)
(**) NOUVEAU(0): Default mode "400x300": 25.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz (D)
(II) NOUVEAU(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz)
(==) NOUVEAU(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/local/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.4.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/local/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(==) NOUVEAU(0): Write-combining range (0xa0000,0x10000) was already clear
(II) NOUVEAU(0): Allocated 128MiB VRAM for framebuffer + offscreen pixmaps, at offset 0x20000000
(II) NOUVEAU(0): AGPGART: 512MiB available
(EE) NOUVEAU(0): Unable to allocate GART memory
(II) NOUVEAU(0): [drm] Using the DRM lock SAREA also for drawables.
(II) NOUVEAU(0): [drm] framebuffer handle = 0xd0000000
(II) NOUVEAU(0): [drm] added 1 reserved context for kernel
(II) NOUVEAU(0): X context handle = 0x1
(II) NOUVEAU(0): [drm] installed DRM signal handler
More information about the freebsd-x11
mailing list