Fine, OK, here's my initial AR9380/AR9485 support

[Joshua Isom]

Not a laptop, but here's the vendor's website. 
http://www.tp-link.com/en/products/details/?model=TL-WDN4800

On 3/14/2013 9:02 PM, Adrian Chadd wrote:
> 0x3112? What nic is that?
>
> I'll go and take a quick look at the reference driver. Can you google
> your laptop model and see what you can find?
>
>
> Adrian
>
>
> Sent from my Palm Pre on AT&T
>
> ------------------------------------------------------------------------
> On Mar 14, 2013 6:31 PM, Joshua Isom <jrisom at gmail.com> wrote:
>
> On 3/13/2013 7:31 PM, Adrian Chadd wrote:
>> On 9 March 2013 10:54, Adrian Chadd <adrian at freebsd.org> wrote:
>>
>>> What's tested:
>>>
>>> * legacy, 1x1 and 2x2 HT20/HT40, STA mode
>>> * AR9380 (1x1, 2x2 - 2/5ghz)
>>> * AR9485 (1x1, 2ghz only)
>>
>> I can now add two more NICs to this list:
>>
>> * AR9390 (HB116)
>> * AR9462 (WB225)
>>
>> Thanks,
>>
>>
>> Adrian
>> _______________________________________________
>> freebsd-wireless at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
>> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe at freebsd.org"
>>
>
>
> I've got it all compiled and booted, but the driver's not finding the
> card. Any ideas?
>
>> [jri:~] root# uname -a
>> FreeBSD jri.homeunix.com 10.0-CURRENT FreeBSD 10.0-CURRENT #5 r248281M: Thu Mar 14 18:55:48 CDT 2013     root at jri.homeunix.com:/usr/obj/root/ATH/head/sys/ATH  amd64
>> [jri:~] root# pciconf -lv # Truncated
>> none3 at pci0:2:0:0:       class=0x028000 card=0x3112168c chip=0x0030168c rev=0x01 hdr=0x00
>>     vendor     = 'Atheros Communications Inc.'
>>     device     = 'AR9300 Wireless LAN adaptor'
>>     class      = network
>> [jri:~] root# diff ATH/head/sys/amd64/conf/{ATH,GENERIC}
>> 27,30d26
>> < options ATH_DEBUG
>> < options AH_DEBUG
>> < options ATH_DIAGAPI
>> <
>> 142c138
>> < #device               cd              # CD
>> ---
>>> device                cd              # CD
>> [jri:~] root# ifconfig
>> nfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>>         options=82008<VLAN_MTU,WOL_MAGIC,LINKSTATE>
>>         ether 6c:f0:49:d5:6f:6a
>>         inet 192.168.1.6 netmask 0xffffff00 broadcast 192.168.1.255
>>         inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255
>>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>         media: Ethernet autoselect (1000baseT <full-duplex>)
>>         status: active
>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>>         options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
>>         inet6 ::1 prefixlen 128
>>         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
>>         inet 127.0.0.1 netmask 0xff000000
>>         nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
>> [jri:~] root# kldload if_ath
>> kldload: can't load if_ath: File exists
>
> _______________________________________________
> freebsd-wireless at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe at freebsd.org"