Fine, OK, here's my initial AR9380/AR9485 support

[Adrian Chadd]

0x3112? What nic is that?

I'll go and take a quick look at the reference driver. Can you google your laptop model and see what you can find?


Adrian


Sent from my Palm Pre on AT&T
On Mar 14, 2013 6:31 PM, Joshua Isom <jrisom at gmail.com> wrote: 

On 3/13/2013 7:31 PM, Adrian Chadd wrote:

> On 9 March 2013 10:54, Adrian Chadd <adrian at freebsd.org> wrote:

>

>> What's tested:

>>

>> * legacy, 1x1 and 2x2 HT20/HT40, STA mode

>> * AR9380 (1x1, 2x2 - 2/5ghz)

>> * AR9485 (1x1, 2ghz only)

>

> I can now add two more NICs to this list:

>

> * AR9390 (HB116)

> * AR9462 (WB225)

>

> Thanks,

>

>

> Adrian

> _______________________________________________

> freebsd-wireless at freebsd.org mailing list

> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless

> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe at freebsd.org"

>





I've got it all compiled and booted, but the driver's not finding the 

card.  Any ideas?



> [jri:~] root# uname -a

> FreeBSD jri.homeunix.com 10.0-CURRENT FreeBSD 10.0-CURRENT #5 r248281M: Thu Mar 14 18:55:48 CDT 2013     root at jri.homeunix.com:/usr/obj/root/ATH/head/sys/ATH  amd64

> [jri:~] root# pciconf -lv # Truncated

> none3 at pci0:2:0:0:       class=0x028000 card=0x3112168c chip=0x0030168c rev=0x01 hdr=0x00

>     vendor     = 'Atheros Communications Inc.'

>     device     = 'AR9300 Wireless LAN adaptor'

>     class      = network

> [jri:~] root# diff ATH/head/sys/amd64/conf/{ATH,GENERIC}

> 27,30d26

> < options ATH_DEBUG

> < options AH_DEBUG

> < options ATH_DIAGAPI

> <

> 142c138

> < #device               cd              # CD

> ---

>> device                cd              # CD

> [jri:~] root# ifconfig

> nfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500

>         options=82008<VLAN_MTU,WOL_MAGIC,LINKSTATE>

>         ether 6c:f0:49:d5:6f:6a

>         inet 192.168.1.6 netmask 0xffffff00 broadcast 192.168.1.255

>         inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255

>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>

>         media: Ethernet autoselect (1000baseT <full-duplex>)

>         status: active

> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384

>         options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>

>         inet6 ::1 prefixlen 128

>         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2

>         inet 127.0.0.1 netmask 0xff000000

>         nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

> [jri:~] root# kldload if_ath

> kldload: can't load if_ath: File exists



_______________________________________________

freebsd-wireless at freebsd.org mailing list

http://lists.freebsd.org/mailman/listinfo/freebsd-wireless

To unsubscribe, send any mail to "freebsd-wireless-unsubscribe at freebsd.org"