multi vap Multi-SSID with ath on FreeBSD 10-current

[Kim Culhan]

On Sun, Jul 22, 2012 at 10:18 PM, Adrian Chadd <adrian.chadd at gmail.com> wrote:
> On 22 July 2012 19:14, Kim Culhan <w8hdkim at gmail.com> wrote:
>
>> Great, the setup to this point is:
>>
>> ifconfig wlan0 create wlandev ath0 wlanmode monitor
>> ifconfig wlan0 channel 6
>> ifconfig wlan0 up
>> tcpdump -ni wlan0 -y IEEE802_11_RADIO
>>
>> How should it be setup to look at the beacons?
>
> Grab a dump and look at it in wireshark.
>
> tcpdump -ni wlan0 -y IEEE802_11_RADIO -s0 -l -v -w output.pcap
>
> Then open that pcap in wireshark and look at just the beacons.:)

Looking at a pcap when running the ap with 4 vaps, behaving in the
usual way looking at it from
a client., cant connect to most of the ssid's.

Not finding anything remarkable looking at it with wireshark, would
you want to give a look
and see what you think?

-kim