USB/U3G: Added support for Panasonic CF-F9 GOBI 3G modem to U3G module

[Tomasz CEDRO]

On Sun, Oct 1, 2017 at 6:40 PM, Ian Lepore <ian at freebsd.org> wrote:
> On Sun, 2017-10-01 at 18:33 +0200, Tomasz CEDRO wrote:
>> On Wed, Sep 27, 2017 at 8:32 AM, Hans Petter Selasky <hps at selasky.org
>> > wrote:
>> >
>> > On 09/27/17 00:37, Ian Lepore wrote:
>> > >
>> > >
>> > > On Wed, 2017-09-27 at 00:30 +0200, Hans Petter Selasky wrote:
>> > > >
>> > > >
>> > > > On 09/27/17 00:11, Tomasz CEDRO wrote:
>> > > > >
>> > > > >
>> > > > >
>> > > > > https://github.com/freebsd/freebsd/pull/115
>> > > > >
>> > > > > :-)
>> > > > >
>> > > > The devd.conf rule should match more than just vendor and
>> > > > product:
>> > > >
>> > > >
>> > > > +# Load GOBI 2000/3000 U3G QDL modem firmware on attach / boot.
>> > > > +# Note: This requires additional "gobi_loader" utility to be
>> > > > installed,
>> > > > +#   as well as valid QDL driver firmware files placed in
>> > > > /boot/firmware/gobi.
>> > > > +#   If modem does not accept valid firmware try gobi_loader
>> > > > -2000
>> > > > switch.
>> > > > +#   Please adjust modem VID/PID to match your device supported
>> > > > by
>> > > > u3g
>> > > > module.
>> > > > +#attach 100 {
>> > > > +#      match "vendor" "0x04da";
>> > > > +#      match "product" "0x250e";
>> > > > +#      action "/usr/local/sbin/gobi_loader /dev/cuaU0
>> > > > /boot/firmware/gobi/";
>> > > > +#};
>> > > >
>> > > > Else patch looks good.
>> > > >
>> > > > --HPS
>> > >
>> > > Hard-coding /dev/cuaU0 cannot possibly be right.
>> > >
>> > > -- Ian
>> > >
>> > These three lines are missing:
>> >
>> >         match "system"          "DEVFS";
>> >         match "subsystem"       "CDEV";
>> >         match "type"            "CREATE";
>> >
>> >
>> > --HPS
>> Thanks! Updated! :-)
>>
>> https://github.com/freebsd/freebsd/pull/115
>>
>
> If this is to be an example, it should be correct.  Please replace the
> "cuaU0" with "$cdev".  (See /etc/devd/uath.conf for an example).
>
> -- Ian

Thanks Ian! Is it okay now? I have moved this example to dedicated
/etc/devd/u3g.conf file, and added u3g load to /etc/devd/usb.conf.. if
syntax is okay I will verify on my laptop..

https://github.com/freebsd/freebsd/pull/115

-- 
CeDeROM, SQ7MHZ, http://www.tomek.cedro.info