USB/U3G: Added support for Panasonic CF-F9 GOBI 3G modem to U3G module

[Ian Lepore]

On Sun, 2017-10-01 at 18:33 +0200, Tomasz CEDRO wrote:
> On Wed, Sep 27, 2017 at 8:32 AM, Hans Petter Selasky <hps at selasky.org
> > wrote:
> > 
> > On 09/27/17 00:37, Ian Lepore wrote:
> > > 
> > > 
> > > On Wed, 2017-09-27 at 00:30 +0200, Hans Petter Selasky wrote:
> > > > 
> > > > 
> > > > On 09/27/17 00:11, Tomasz CEDRO wrote:
> > > > > 
> > > > > 
> > > > > 
> > > > > https://github.com/freebsd/freebsd/pull/115
> > > > > 
> > > > > :-)
> > > > > 
> > > > The devd.conf rule should match more than just vendor and
> > > > product:
> > > > 
> > > > 
> > > > +# Load GOBI 2000/3000 U3G QDL modem firmware on attach / boot.
> > > > +# Note: This requires additional "gobi_loader" utility to be
> > > > installed,
> > > > +#   as well as valid QDL driver firmware files placed in
> > > > /boot/firmware/gobi.
> > > > +#   If modem does not accept valid firmware try gobi_loader
> > > > -2000
> > > > switch.
> > > > +#   Please adjust modem VID/PID to match your device supported
> > > > by
> > > > u3g
> > > > module.
> > > > +#attach 100 {
> > > > +#      match "vendor" "0x04da";
> > > > +#      match "product" "0x250e";
> > > > +#      action "/usr/local/sbin/gobi_loader /dev/cuaU0
> > > > /boot/firmware/gobi/";
> > > > +#};
> > > > 
> > > > Else patch looks good.
> > > > 
> > > > --HPS
> > > 
> > > Hard-coding /dev/cuaU0 cannot possibly be right.
> > > 
> > > -- Ian
> > > 
> > These three lines are missing:
> > 
> >         match "system"          "DEVFS";
> >         match "subsystem"       "CDEV";
> >         match "type"            "CREATE";
> > 
> > 
> > --HPS
> Thanks! Updated! :-)
> 
> https://github.com/freebsd/freebsd/pull/115
> 

If this is to be an example, it should be correct.  Please replace the
"cuaU0" with "$cdev".  (See /etc/devd/uath.conf for an example).

-- Ian