Second pool not mounted automaticly on 13.0-RC2

[Johan Hendriks]

On 13/03/2021 17:09, Johan Hendriks wrote:
> Hello all, i just upgrade my test server from 12.1 to 13.0-RC2. This 
> is a baremetal server.
> It has two ssd's on ada0 and ada1 using zfs. Also there is a 6 disk 
> pool named storage.
>
> After the update the storage pool is not imported any more. I have 
> updated the pool, thinking it was necessary, but the result is the 
> same, after a reboot the storage pool is not imported.
>
> root at test-server:~ # zpool list
> NAME    SIZE  ALLOC   FREE  CKPOINT  EXPANDSZ   FRAG    CAP DEDUP    
> HEALTH  ALTROOT
> zroot   107G  1.60G   105G        -         -     0%     1% 1.00x    
> ONLINE  -
> root at test-server:~ # zpool import
>    pool: storage
>      id: 17039452293665227158
>   state: ONLINE
>  action: The pool can be imported using its name or numeric identifier.
>  config:
>
>     storage         ONLINE
>       mirror-0      ONLINE
>         gpt/disk00  ONLINE
>         gpt/disk01  ONLINE
>       mirror-1      ONLINE
>         gpt/disk02  ONLINE
>         gpt/disk03  ONLINE
>       mirror-2      ONLINE
>         gpt/disk04  ONLINE
>         gpt/disk05  ONLINE
> root at test-server:~ #
>
> After importing the pool all is fine but after a reboot it needs to be 
> imported again.
>
> Did something change?
> I observed this earlier on a HEAD which was 13 at that time (around 
> januari) but did not have the time to look at it. That was a baremetal 
> server also.
>
For the completeness, i have the following related settings in 
/boot/loader.conf.

# ZFS
zfs_load="YES"

And in my /etc/rc.conf the following.
# ZFS
zfs_enable="YES"