pkg thinks kernel is old

[Baptiste Daroussin]

On Fri, Oct 11, 2019 at 03:07:13PM +0200, Bengt Ahlgren wrote:
> Baptiste Daroussin <bapt at FreeBSD.org> writes:
> 
> > On Fri, Oct 11, 2019 at 02:50:57PM +0200, Bengt Ahlgren wrote:
> >> Baptiste Daroussin <bapt at FreeBSD.org> writes:
> >> 
> >> > On Fri, Oct 11, 2019 at 01:57:06PM +0200, Bengt Ahlgren wrote:
> >> >> Baptiste Daroussin <bapt at FreeBSD.org> writes:
> >> >> 
> >> >> > On Fri, Oct 11, 2019 at 11:54:15AM +0200, Bengt Ahlgren wrote:
> >> >> >> Baptiste Daroussin <bapt at FreeBSD.org> writes:
> >> >> >> 
> >> >> >> > On Fri, Oct 11, 2019 at 11:38:46AM +0200, Bengt Ahlgren wrote:
> >> >> >> >> Baptiste Daroussin <bapt at FreeBSD.org> writes:
> >> >> >> >> 
> >> >> >> >> > On Thu, Oct 10, 2019 at 03:44:03PM +0200, Bengt Ahlgren wrote:
> >> >> >> >> >> Ronald Klop <ronald-lists at klop.ws> writes:
> >> >> >> >> >> 
> >> >> >> >> >> > Van: Bengt Ahlgren <bengt.ahlgren at ri.se>
> >> >> >> >> >> > Datum: woensdag, 9 oktober 2019 23:38
> >> >> >> >> >> > Aan: stable at freebsd.org
> >> >> >> >> >> > Onderwerp: pkg thinks kernel is old
> >> >> >> >> >> >>
> >> >> >> >> >> >> I've ran into this on my 11.3-STABLE system:
> >> >> >> >> >> >>
> >> >> >> >> >> >> # uname -K
> >> >> >> >> >> >> 1103500
> >> >> >> >> >> >> # pkg update -f
> >> >> >> >> >> >> Updating ivyp repository catalogue...
> >> >> >> >> >> >> Fetching meta.txz: 100%    560 B   0.6kB/s    00:01    Fetching
> >> >> >> >> >> >> packagesite.txz: 100%  410 KiB 419.9kB/s    00:01    Processing
> >> >> >> >> >> >> entries:   0%
> >> >> >> >> >> >> Newer FreeBSD version for package zziplib:
> >> >> >> >> >> >> To ignore this error set IGNORE_OSVERSION=yes
> >> >> >> >> >> >> - package: 1103000
> >> >> >> >> >> >> - running kernel: 1102509
> >> >> >> >> >> >> Ignore the mismatch and continue? [Y/n]:
> >> >> >> >> >> >>
> >> >> >> >> >> >> I build my own packages with poudriere, and have just switched from an
> >> >> >> >> >> >> 11.2-REL to an 11.3-REL jail.  I didn't force-upgrade everything after
> >> >> >> >> >> >> the switch, perhaps that's needed to make pkg recognise the correct
> >> >> >> >> >> >> kernel version?
> >> >> >> >> >> >>
> >> >> >> >> >> >> Bengt
> >> >> >> >> >> 
> >> >> >> >> >> > This message of pkg is misleading.
> >> >> >> >> >> >
> >> >> >> >> >> > It looks at /bin/sh or something like that for the version. And prints
> >> >> >> >> >> > that as the 'kernel' version. So if you did an incremental build and
> >> >> >> >> >> > /bin/sh was not changed the version stays the same.
> >> >> >> >> >> > To fix it you can do a clean buildworld/installworld.
> >> >> >> >> >> >
> >> >> >> >> >> > Regards,
> >> >> >> >> >> > Ronald.
> >> >> >> >> >> 
> >> >> >> >> >> That might well be it - I've done some buildworld:s with -DNO_CLEAN
> >> >> >> >> >> lately.  I'll test - thanks for the tip!
> >> >> >> >> >
> >> >> >> >> > Can you provide the uname -U information (building with -DNO_CLEAN) should be
> >> >> >> >> > perfectly fine.
> >> >> >> >> 
> >> >> >> >> Thanks for looking into this!
> >> >> >> >> 
> >> >> >> >> $ uname -U
> >> >> >> >> 1103500
> >> >> >> >> 
> >> >> >> >> Let me know if there is something else I can check before I do a full
> >> >> >> >> buildworld on this system!
> >> >> >> >
> >> >> >> > What are the output of pkg config osversion
> >> >> >> > and pkg -o ABI_FILE=/usr/bin/uname config osversion
> >> >> >> > please
> >> >> >> 
> >> >> >> $ pkg config osversion
> >> >> >> 1102509
> >> >> >> $ pkg -o ABI_FILE=/usr/bin/uname config osversion
> >> >> >> 1102509
> >> >> >
> >> >> > It means you /usr/bin/uname binary has been built with a compiler that says it
> >> >> > is building for 1102509.
> >> >> >
> >> >> > Can you show the output of file /usr/bin/uname ?
> >> >> 
> >> >> $ uname -aKU
> >> >> FreeBSD P142.sics.se 11.3-STABLE FreeBSD 11.3-STABLE #9 r353280: Mon
> >> >> Oct 7 22:16:02 CEST 2019
> >> >> root at P142.sics.se:/storage/obj/usr/src/sys/X250 amd64 1103500
> >> >> 1103500
> >> >> 
> >> >> no signs of 1102509 there...
> >> >> 
> >> >> and "strings -a /usr/bin/uname |grep 110" returns nothing.
> >> >> 
> >> > I am interested in the output of file /usr/bin/uname
> >> 
> >> Ah, right, didn't get it that you meant the file command, sorry...
> >> 
> >> $ file /usr/bin/uname 
> >> /usr/bin/uname: ELF 64-bit LSB executable, x86-64, version 1
> >> (FreeBSD), dynamically linked, interpreter /libexec/ld-elf.so.1, for
> >> FreeBSD 11.2 (1102509), FreeBSD-style, stripped
> >> 
> >
> > That is the problem.
> >
> > So if you don't want to rebuild you can add to your make.conf ABI_FILE= XXX
> > where XXX is the path to any file where when you run file on it says it was
> > built for freebsd 11.3
> 
> Great, thanks for investigating!  It also means that it is safe to
> answer "Y" to the pkg question and just let it carry on!
> 
> Bengt

yes :x
it is.

Best regards,
Bapt
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20191011/74b71cb2/attachment.sig>