head -r339076's boot loader fails to boot threadripper 1950X system (BTX halted); an earlier version works [ -r336532 broke it ]
Warner Losh
imp at bsdimp.com
Sun Oct 21 05:33:07 UTC 2018
On Sat, Oct 20, 2018 at 11:04 PM Mark Millard <marklmi at yahoo.com> wrote:
> [I found what change lead to the 1950X boot crashing
> with BTX halted.]
>
> On 2018-Oct-20, at 12:44 PM, Mark Millard <marklmi at yahoo.com> wrote:
>
> > [Adding some vintage information for a loader
> > that allowed a native boot.]
> >
> > On 2018-Oct-20, at 4:00 AM, Mark Millard <marklmi at yahoo.com> wrote:
> >
> >> I attempted to jump from head -r334014 to -r339076
> >> on a threadripper 1950X board and the native
> >> FreeBSD boot failed very early. (Hyper-V use of
> >> the same media did not have this issue.)
> >>
> >> But copying over an older /boot/loader from another
> >> storage device with a FreeBSD head version that has
> >> not been updated yet got past the problem being
> >> reported here. (For other reasons, the kernel has
> >> been moved back to -r338804 --and with that,
> >> and the older /boot/loader, the 1950X native-boots
> >> FreeBSD all the way just fine.)
> >
> > I found one /boot/loader.old that was dated
> > in the update'd file system as 2018-May 20,
> > instead of 2018-Apr-03 from the older file
> > system. May 20 would apparently mean a little
> > below -r334014 . It native-booted okay, as did
> > the April one.
> >
> > [I do not know how to inspect a /boot/loader*
> > to find out what -r?????? it is from.]
> >
> > Unfortunately, I had done more than one -r339076
> > install from -r334014 before rebooting and
> > no -r334014 loaders were still present:
> > the other *.old files from a few minutes before
> > the ones I had the boot problem with.
> >
> > I might be able to extract loaders from various:
> >
> > https://artifact.ci.freebsd.org/snapshot/head/r*/amd64/amd64/base.txz
> >
> > materials and try substituting them in order to
> > narrow the range for works -> fails. If I can,
> > this likely would take a fair amount of time in
> > my context.
> >
> > Other notes:
> >
> > It turns out that only Hyper-V based use needed
> > a -r334804 kernel: Native booting with the older
> > loaders and newer kernels works fine.
> >
> > Windows 10 Pro 64bit also has no problems
> > booting and operating the machine.
> >
> > The native-boot problem does seem to be freeBSD
> > loader-vintage specific.
> >
> >> For the BTX failure the display ends up with
> >> (hand transcribed, ". . ." for an omission):
> >>
> >> BTX loader 1.00 BTX version is 1.02
> >> Console: internal video/keyboard
> >> BIOS drive C: is disk0
> >> . . .
> >> BIOS drive P: is disk13
> >> -
> >> int=00000000 err=00000000 efl=00010246 eip=000096fd
> >> eax=74d48000 ebx=74d4e5e0 ecx=00000011 edx=00000000
> >> esi=74d4e380 edi=74d4e5b0 ebp=00091da0 esp=00091d60
> >> cs=002b ds=0033 es=0033 fs=0033 gs=0033 ss=0033
> >> cs:eip=66 f7 77 04 0f b7 c0 89-44 24 0c 89 5c 24 04 8b
> >> 45 08 89 04 24 83 64 24-10 00 c7 44 24 08 01 00
> >> ss:esp=00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00
> >> 00 00 00 00 00 00 00 00-f0 1d 89 00 00 00 00 00
> >> BTX halted
> >
> > I've no clue what of that output might be loader vintage
> > specific. It might not be of use without knowing the
> > exact build of the loader.
> >
> >> The board is a GIGABYTE X399 AORUS Gaming 7 (rev 1.0).
> >> It has 96 GiBytes of ECC RAM, just 6 DIMMs installed.
> >
> > For reference for the board's BIOS:
> >
> > Version: F11e
> > Dated: 2018-Sep-17
> > Description: Update AGESA 1.1.0.1a
>
> Using:
>
> https://artifact.ci.freebsd.org/snapshot/head/r*/amd64/amd64/base.txz
>
> materials I found that:
>
> -r336492: worked (loader vs. zfsloader: not linked)
> (no more amd64 builds until . . .)
> -r336538: failed (loader vs. zfsloader: linked)
>
> (Later ones that I tried also failed.)
>
> Looks like this broke for booting the 1950X
> system in question when the following was
> checked in:
>
> Author: imp
> Date: Fri Jul 20 05:17:37 2018
> New Revision: 336532
> URL:
> https://svnweb.freebsd.org/changeset/base/336532
>
>
> Log:
> Collapse zfsloader functionality back down into loader.
>
Yea, this shouldn't matter. It worked on all the systems I tried it on.
So my first question: is this a ZFS system? Second, does it also have UFS?
If yes to both, which one do you want it to boot off of?
Warner
More information about the freebsd-stable
mailing list