MMC problem on APU2 with 11.2

[Stefan Bethke]

> Am 14.07.2018 um 16:34 schrieb Ruben <mail at osfux.nl>:
> 
> Hi Graham,
> 
> On 07/14/2018 06:03 AM, Graham Menhennitt wrote:
>> This probably isn't much use to you, but I'm running FreeBSD 11-Stable on two APU2s. But I'm booting from SSD, not SDHC. No problems here.
>> 
>> Graham
>> _______________________________________________
> 
> Thank you for your feedback. Good to hear more list ppl are running APU2's :)
> 
> I think the issue was triggered by the SDHC/MMC driver in 11.2 and the APU2's firmware because after updating the firmware I ran (4.0.7) to the most recent firmware available on https://pcengines.github.io/#lr-10 (4.0.18 legacy), the problem was solved.
> 
> Since PC Engines advises users to only run the github firmware if users have the possibility to de-brick their units (which I only learned about afterwards and requires special hardware..) I guess some caution is advised.
> 
> 
> The board seems to be running fine with 11.2 now so I'm happy :)

I’m having problems with the two USB3 ports at the back, and I have the non-legacy BIOS version 4.8.0.1.

Are USB devices working as expected for you?


Stefan

-- 
Stefan Bethke <stb at lassitu.de>   Fon +49 151 14070811