11.2-STABLE and MMC problems on pcEngines apu2c0

Mon Dec 10 21:38:19 UTC 2018

Built this morning....

FreeBSD 11.2-STABLE #0 r341796: Mon Dec 10 13:20:13 CST 2018

System is a pcEngines machine, apu2c0.  It has been running on
11.0-STABLE for well north of a year without problems.  It boots and
runs on 11.2, but I'm getting a LOT of these errors...

mmc0: CMD7 failed, RESULT: 1
mmc0: Card at relative address 43690 failed to select
mmc0: CMD7 failed, RESULT: 1
mmc0: Card at relative address 43690 failed to select
mmc0: CMD7 failed, RESULT: 1
mmc0: Card at relative address 43690 failed to select
mmc0: CMD7 failed, RESULT: 1
mmc0: Card at relative address 43690 failed to select
mmc0: CMD7 failed, RESULT: 1
mmc0: Card at relative address 43690 failed to select
mmc0: Card at relative address 43690 failed to select
mmc0: Card at relative address 43690 failed to select
mmc0: Card at relative address 43690 failed to select
mmc0: Card at relative address 43690 failed to select
mmc0: Card at relative address 43690 failed to select
mmc0: Card at relative address 43690 failed to select
mmc0: Card at relative address 43690 failed to select

Same SD card, same everything EXCEPT that I booted partition 2 (for
11.2) rather than partition 1 (11.0.)

In both cases the root filesystem is mounted read-only (this is a
NanoBSD config) so there shouldn't be any write I/O going to the card at
all.  As far as I can tell the errors going to the console aren't
preventing anything from starting and running, but they sure don't look
good!

dmesg -a from 11.0 (by the time I can get to it on 11.2 the boot
messages are long-since scrolled off)

Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-STABLE #0 r312669M: Wed Jun 14 17:57:26 CDT 2017

root at NewFS.denninger.net:/pics/Crochet-work-AMD/obj/usr/src/sys/KSD-SMP
amd64
FreeBSD clang version 3.9.1 (tags/RELEASE_391/final 289601) (based on
LLVM 3.9.1)
VT(vga): resolution 640x480
CPU: AMD GX-412TC SOC                                (998.15-MHz
K8-class CPU)
  Origin="AuthenticAMD"  Id=0x730f01  Family=0x16  Model=0x30  Stepping=1

Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>

Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD
Features2=0x1d4037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PTSC,PL2I>
  Structured Extended Features=0x8<BMI1>
  XSAVE Features=0x1<XSAVEOPT>
  SVM: NP,NRIP,AFlush,DAssist,NAsids=8
  TSC: P-state invariant, performance statistics
real memory  = 2012930048 (1919 MB)
avail memory = 1906143232 (1817 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <CORE   COREBOOT>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
ioapic1: Changing APIC ID to 5
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
random: entropy device external interface
kbd0 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8101fd00, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <CORE COREBOOT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x818-0x81b on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.2 on pci0
pcib1: failed to allocate initial I/O port window: 0x1000-0x1fff
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem
0xfe700000-0xfe71ffff,0xfe720000-0xfe723fff at device 0.0 on pci1
igb0: Using MSIX interrupts with 3 vectors
igb0: Ethernet address: 00:0d:b9:46:71:88
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib2: <ACPI PCI-PCI bridge> at device 2.4 on pci0
pci2: <ACPI PCI bus> on pcib2
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port
0x2000-0x201f mem 0xfe800000-0xfe81ffff,0xfe820000-0xfe823fff at device
0.0 on pci2
igb1: Using MSIX interrupts with 3 vectors
igb1: Ethernet address: 00:0d:b9:46:71:89
igb1: Bound queue 0 to cpu 2
igb1: Bound queue 1 to cpu 3
igb1: netmap queues/slots: TX 2/1024, RX 2/1024
pci0: <encrypt/decrypt> at device 8.0 (no driver attached)
xhci0: <AMD FCH USB 3.0 controller> mem 0xfeb22000-0xfeb23fff at device
16.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Unable to map MSI-X table
usbus0 on xhci0
ahci0: <AMD Hudson-2 AHCI SATA controller> port
0x3010-0x3017,0x3020-0x3023,0x3018-0x301f,0x3024-0x3027,0x3000-0x300f
mem 0xfeb25000-0xfeb253ff at device 17.0 on pci0
ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ehci0: <AMD FCH USB 2.0 controller> mem 0xfeb25400-0xfeb254ff at device
19.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
sdhci_pci0: <Generic SD HCI> mem 0xfeb25500-0xfeb255ff at device 20.7 on
pci0
sdhci_pci0: 1 slot(s) allocated
mmc0: <MMC/SD bus> on sdhci_pci0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb5
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc0fff,0xef000-0xeffff on isa0
ppc0: cannot reserve I/O port range
uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
DUMMYNET 0 with IPv6 initialized (100409)
load_dn_sched dn_sched QFQ loaded
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched FQ_CODEL loaded
load_dn_sched dn_sched FQ_PIE loaded
load_dn_sched dn_sched PRIO loaded
load_dn_aqm dn_aqm CODEL loaded
load_dn_aqm dn_aqm PIE loaded
nvme cam probe device init
ugen0.1: <0x1022 XHCI root HUB> at usbus0
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <AMD EHCI root HUB> at usbus1
uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mmcsd0: 16GB <SDHC SL16G 8.0 SN A4981A22 MFG 01/2017 by 3 SD> at mmc0
31.5MHz/4bit/65535-block
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 998148762 Hz quality 1000
Trying to mount root from ufs:/dev/mmcsd0s1a [ro]...
uhub0: 4 ports with 4 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x0438 product 0x7900> at usbus1
uhub2 on uhub1
uhub2: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2>
on usbus1
uhub2: 4 ports with 4 removable, self powered
random: unblocking device.
Setting hostuuid: 1295647e-51e2-11e7-a9c2-000db9467188.
Setting hostid: 0xa175f087.
Starting file system checks:
/dev/mmcsd0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/mmcsd0s1a: clean, 2091305 free (7889 frags, 260427 blocks, 0.2%
fragmentation)
/dev/mmcsd0s3: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/mmcsd0s3: clean, 118711 free (31 frags, 14835 blocks, 0.0%
fragmentation)
/dev/mmcsd0s4: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/mmcsd0s4: clean, 700000 free (920 frags, 87385 blocks, 0.1%
fragmentation)
Mounting local filesystems:.
ELF ldconfig path: /lib /usr/lib /usr/local/lib /usr/local/lib/ipsec
/usr/local/lib/perl5/5.24/mach/CORE
32-bit compatibility ldconfig path: /usr/lib32
Setting hostname: IpGw.Denninger.Net.
Additional TCP/IP options: IPv6 CPE WANIF=igb0.
Setting up harvesting:
[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: eval: cannot create /boot/entropy: Read-only file system
Starting Network: lo0 igb0 igb1 enc0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        groups: lo
igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500

options=6000bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        ether 00:0d:b9:46:71:88
        inet6 fe80::20d:b9ff:fe46:7188%igb0 prefixlen 64 scopeid 0x1
        nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
        media: Ethernet autoselect
        status: no carrier
igb1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500

options=2000bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,RXCSUM_IPV6>
        ether 00:0d:b9:46:71:89
        inet 192.168.10.200 netmask 0xffffff00 broadcast 192.168.10.255
        inet 192.168.2.200 netmask 0xffffff00 broadcast 192.168.2.255
        inet6 fe80::20d:b9ff:fe46:7189%igb1 prefixlen 64 scopeid 0x2
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        media: Ethernet autoselect
        status: no carrier
enc0: flags=0<> metric 0 mtu 1536
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        groups: enc
Starting devd.
Starting Network: enc0.
enc0: flags=0<> metric 0 mtu 1536
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        groups: enc
igb1: link state changed to UP
igb1.3: link state changed to UP
igb0: link state changed to UP
Starting dhclient.
DHCPDISCOVER on igb0 to 255.255.255.255 port 67 interval 7
DHCPOFFER from 10.2.224.1
DHCPREQUEST on igb0 to 255.255.255.255 port 67
DHCPACK from 10.2.224.1
bound to 68.1.57.197 -- renewal in 43200 seconds.
add host 127.0.0.1: gateway lo0 fib 0: route already in table
Additional inet routing options: gateway=YES.
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Additional inet6 routing options: gateway=YES.
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to
deny, logging disabled
Firewall rules loaded.
Starting local_unbound.
[1544477459] unbound[782:0] warning: too many file descriptors
requested. The builtinmini-event cannot handle more than 1024. Config
for less fds or compile with libevent
[1544477459] unbound[782:0] warning: continuing with less udp ports: 948
Waiting for nameserver to start... good
Starting dhcp6c.
Creating and/or trimming log files.
Starting syslogd.
Clearing /tmp (X related).
Starting strongSwan 5.5.3 IPsec [starter]...
no netkey IPsec stack detected
no KLIPS IPsec stack detected
no known IPsec stack detected, ignoring!
Starting local daemons:add net 192.168.2.0: gateway 192.168.10.100 fib
0: route already in table
.
Updating motd:.
Mounting late filesystems:.
Starting ntpd.
Starting powerd.
Starting rtadvd.
Dec 10 15:31:01 IpGw ntpd[985]: leapsecond file
('/var/db/ntpd.leap-seconds.list'): expired less than 558 days ago
Starting dhcpd.
Internet Systems Consortium DHCP Server 4.3.5
Copyright 2004-2016 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Config file: /usr/local/etc/dhcpd.conf
Database file: /var/db/dhcpd.leases
PID file: /var/run/dhcpd.pid
Wrote 0 deleted host decls to leases file.
Wrote 0 new dynamic host decls to leases file.
Wrote 0 leases to leases file.
Listening on BPF/igb1.3/00:0d:b9:46:71:89/192.168.4.0/24
Sending on   BPF/igb1.3/00:0d:b9:46:71:89/192.168.4.0/24
Listening on BPF/igb1/00:0d:b9:46:71:89/two-on-cable
Sending on   BPF/igb1/00:0d:b9:46:71:89/two-on-cable
Sending on   Socket/fallback/fallback-net
Starting sshguard.
Starting snmpd.
cannot forward src fe80:2::396c:673e:9cf:ba21, dst
2600:1402:16::17db:a212, nxt 6, rcvif igb1, outif igb0
Starting openvpn.
tun0: link state changed to UP
Configuring vt: blanktime.
Performing sanity check on sshd configuration.
Starting sshd.
Starting sendmail_submit.
Starting sendmail_msp_queue.
Starting cron.
Starting background file system checks in 60 seconds.

Mon Dec 10 15:31:06 CST 2018
cannot forward src fe80:2::396c:673e:9cf:ba21, dst
2600:1402:16::17db:a212, nxt 6, rcvif igb1, outif igb0
cannot forward src fe80:2::396c:673e:9cf:ba21, dst
2600:1402:16::17db:a212, nxt 6, rcvif igb1, outif igb0
cannot forward src fe80:2::396c:673e:9cf:ba21, dst
2600:1402:16::17db:a212, nxt 6, rcvif igb1, outif igb0
cannot forward src fe80:2::396c:673e:9cf:ba21, dst
2600:1402:16::17db:a212, nxt 6, rcvif igb1, outif igb0

-- 
Karl Denninger
karl at denninger.net <mailto:karl at denninger.net>
/The Market Ticker/
/[S/MIME encrypted email preferred]/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4897 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20181210/a810e389/attachment.bin>